http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수치해석을 이용한 압축 분산형 앵커의 내하체 최적 간격 산정
구교영,신규범,정충기,김성렬 한국지반공학회 2019 한국지반공학회논문집 Vol.35 No.7
Load distributive compression anchors distribute the compressive stress in the grout and increase the pull-out capacity of the anchor by using multiple anchor bodies. In this anchor type, the spacing between the anchor bodies has a large influence on the stress in the grout. However, there are few researches about the spacing and there are no design standards. Therefore, the effect of the anchor body spacing on the grout stress was analyzed by performing finite element analyses. First, the applicability of the numerical modeling was verified by comparing with field test results of a compression anchor. Then, the parametric study was performed varying soil type, anchor body spacing, and load magnitude. The analysis results showed that the maximum compressive stress in the grout increased at the narrower spacing and the tensile stress developed at the wider spacing. Therefore, the optimum spacing was defined as the spacing, which prevents the superposition of compressive stresses and minimize the tensile stress. Finally, the optimum spacing was proposed according to the soil type and the load magnitude.
AR 수술 환경에서 PBD 기반 유방 영역 변형 시뮬레이션
구교영,강승우,박태용,정희렬,류제철,이준우,이종명,권혁,나승원,이정진 한국차세대컴퓨팅학회 2023 한국차세대컴퓨팅학회 논문지 Vol.19 No.4
In this paper, we propose a PBD-based breast deformation simulation technique to reduce the differences in shape between a 3D torso model generated from preoperative CT images and a 3D skin surface model scanned using depth sensors during AR surgery. Variations in patient positioning, respiration, and other factors can affect breast shape. We use constraints for length, angles, and volume to consider anatomical features and introduce nipple position alignment to minimize differences. Results demonstrate the technique's effectiveness, reducing surface differences from 8.22mm to 6.42mm and nipple differences from 10.03mm to 6.85mm after deformation. 의료영상 촬영 자세와 수술 자세의 차이, 환자의 호흡 등의 이유로 촬영된 유방의 형태와 현재 유방의 형태가 달라질 수 있다. 본 논문에서는 수술 전 촬영한 CT 영상으로 생성한 3차원 몸통 모델과 AR 수술 중 깊이 센서를 이용하여 3차원 스캔한 피부 표면 모델 간 형태 차이를 줄이기 위하여 PBD 기반 유방 변형 시뮬레이션 기법을 제안한다. 연체의 특성을 고려하기 위하여 길이, 각도, 부피 보존 제약조건을 적용하였으며, 몸통 모델의 유두 위치를 피부 스캔 모델의 유두 위치로 이동시켜 유방의 형태 오차를 줄이기 위한 제약조건을 제안한다. 두 모델 간 표면 오차가 변형 전 평균 8.22mm에서 변형 후 6.42mm, 유두 오차는 변형 전 평균 10.03mm에서 변형 후 6.85mm로 줄어들어 본 제안 기법으로 유방의 형태 차이를 줄일 수 있음을 확인할 수 있었다.
AR기반 뇌실천자술을 위한 3차원 연체 조직의 물리 변형 시뮬레이션
구교영,박태용,정희렬,강승우,이시현,김준동,김동준,이정진 한국차세대컴퓨팅학회 2021 한국차세대컴퓨팅학회 논문지 Vol.17 No.5
본 논문에서는 PBD(Position Based Dynamics) 물리 변형 기법을 활용하여 수술 전 촬영된 뇌의 영상을 통해 생성한 3차원 뇌 모델에 수술기구의 움직임으로 인한 뇌의 변형을 반영하고, 이를 가시화하는 AR(Augmented Reality) 기반 뇌실천자술 시뮬레이션 기법을 제안한다. 적외선 카메라 기반 AR 수술 환경을 구축하여 현실 세계 와 가상 공간을 일치시키고 수술 기구를 추적하였으며, 연체의 특성을 유지하며 안정적인 변형을 가능하도록 하기 위해 constraint를 이용한 변형 안정화 및 특성 유지 기법을 적용하였다. 스마트글래스에 증강되는 정보를 이용하 여 수술기구를 뇌실까지 삽입하여 뇌척수액 배액을 성공적으로 수행하였으며, 변형 시뮬레이션 속도는 평균 7.24fps를 보였다. In this paper, We propose a simulation method of brain deformation caused by surgical instruments using position based dynamics. We used infrared cameras to build AR surgical environment. It is used to match virtual space with real world and to track surgical instruments. We applied the various constraint for stable deformation while maintaining softbody properties. We inserted surgical instruments to the ventricle using augmented information and successfully drained it. The simulation speed of our method was 7.24fps on average.
외식분야 날씨경영에 있어 의사결정요소 및 수요예측 : 치킨 프렌차이즈 사례 기반
구교영(Ku, Kyoyoung),방서연(Bang, Seo Yoen),장우철(Jang, Woo Choul),백종윤(Baek, Jong Yoon),서슬기(Seo, Seulgi) 한국외식경영학회 2020 외식경영연구 Vol.23 No.3
이 연구는 날씨가 외식에 어떤 영향을 주는지에 대해 확인하기 위해 만들어졌다. 외식에 영향을 주는 매출요인은 주말 과 평균온도, 일교차는 양의 상관관계를 풍속, 강우는 음의 상관관계를 가졌다. 따라서 본 외식업체는 주말 평균기온의 상승에 따른 매출증대의 기회를 놓치지 말아야 하고 평일에 풍속, 일교차에 따른 매출감소에 대비해야 한다. 이를 위해 지속적으로 Bigdata를 구축하여 데이터의 정확성을 높일 뿐만 아니라 매장관련 이해관계자들에게 데이터기록, 이용에 대한 교육을 강화해야 한다. This study was created to see how weather affects eating out. Sales factors influencing eating out were positively correlated with weekends, average temperatures, and daily differences, while wind speeds and rainfall had negative correlations. Therefore, this catering company should not miss the opportunity to increase sales due to the rise in average temperature on the weekend and prepare for the decrease in sales due to wind speed on weekdays. To this end, it is necessary to continuously build big data to increase data accuracy, as well as strengthen training on data recording and use for store-related stakeholders.
구교영 ( Kyo Young Ku ),곽철순 ( Cheul Soon Kwak ),황대용 ( Dae Yong Hwang ) 한국농촌지도학회 2012 농촌지도와 개발 Vol.19 No.4
본 연구에서는 신기술 연구개발사업의 사전타당성 평가현황 및 개선방안에 대해 설명하였다. 농촌진흥청이 수행하고 있는 사전타당성 평가방법을 파악하고 이를 발전시킬 수 있는 방안을 모색하기 위해 국내외 여러 기관의 사전타당성 평가제도와 평가지표를 조사·분석하여 새롭게 사전타당성 평가지표를 구성하였다. 이렇게 하여 도출된 평가지표에는 기술성, 시장성, 사업성과 관련된 지표들이 새롭게 산출되었다. 이를 기본내용으로 설문지를 개발하고 응답내용을 통계처리하여 지표간의 비중을 설정하였다. 결과는 사업성이 가장 높게 나타났으며, 세부적으로 예산적절성, 신규성, 기술수요가능성, 상용화가능성의 타당성이 높게 나타났다. 이를 참고하여 사전평가지표의 운영프로세스에 대해 간략하게 제안하였다. The study demonstrated the pre-feasibility evaluation of the new agricultual technology R&D project and the ways to improve it. The study created new criteria for pre-feasibility evaluation based on the results acquired from the examination and analysis of pre-feasibility evaluation systems and criteria of various institutions at home and abroad in order to understand the current state of the evaluation method conducted by the Rural Development Administration and to seek ways for its improvement. The new criteria include indices for technicity, marketability, and feasibility. Based on these, questionnaires were prepared and the answers on them were statistically analyzed to set weights between indices. It was found that feasibility appeared the highest, in particular, feasibilities related to budget appropriateness, novelty, possibility of demand for the technology, and potential of commercialization appeared high. Referring to this conclusion, a simple operation process of pre-feasibility evaluation was introduced in the study.