http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
양방향 펌프구조 고정이득 L-band EDFA의 과도응답 특성
김익상,Kim, Ik-Sang 배재대학교 공학연구소 2004 공학논문집 Vol.5 No.1
WDM(Wavelength Division Multiplexing) 광통신망의 노드에서 신호채널들이 분기 결합될 때 잔류채널들의 이득을 일정하게 제어해 주기 위해 고정이득 EDFA를 사용한다. 본 논문에서는 양방향 펌프에 의해 고이득을 가지는 L-band EDFA에서 발진광에 의해 입력변화를 보상해주는 방식으로 고정이득 EDFA를 구현하였다. 여기서 발진방향 및 파장에 따른 잔류채널의 과도응답 특성에 있어서 단파장 후방발진의 경우가 최적임을 확인할 수 있었다. The gain-clamped EDFA has been developed to eliminate the output power change of WDM surviving channels to occur with added or dropped channels, which degrades the performance of EDM optical network. It maintains the constant gain of surviving channels when WDM channels are added or dropped in a network amplifying node. In this paper, the bi-directionally pumped gain-clamped EDFA is implemented to compensate the change of the input power by a lasing. The results show that the alsing of a short wavelength and backward propagation is the optimal condition to minimize the transient response of surviving channels in terms of the overshoot and gain saturation sue to the inhomogeneous broadening effect.
L-band EDFA에서 주입된 C-band laser에 의한 펌프 효과
김익상,김동욱,김창봉 한국통신학회 2004 韓國通信學會論文誌 Vol.29 No.5A
L-band EDFA는 작은 평균밀도 반전율에서 동작하기 때문에 C-b란d에서 상대적으로 높은 흡수율로 인해 펌프 효과를 가지게 된다. 본 논문에서는 980nm의 펌프 입력 광 파워, C-band 펌프 파장 및 입력 광 파워에 따라 펌프 효과에 대해 논하고자 한다. 즉, C-band 펌프광의 흡수 또는 후방 자연방출광의 흡수라는 두 가지 다른 메카니즘을 통해 펌프 효과를 야기 시키게 된다. 또한 동일한 소 신호 이득 조건 하에서 L-band 신호 입력 광에 의한 포화 특성 (포화 광출력, 잡음지수에 있어서 장파장의 C-band 펌프가 양호한 것으로 나타난다. 전광 고정이득 L-band EDFA에서 C-band발진의 효과를 검토한 결과 L-band발진에 비해서 개선된 특성은 없는 것으로 나타난다. C-band pumping effect appears in L-band EDFA because the absorption in C-band occurs dominant under the condition of such a low average population inversion. In this paper, we show how the C-band pumping effect depends on 980nm pump power, the C-band wavelength, and its input power. The C-band pumping is caused by absorbing C-band injection or backward spontaneous emission power through EDF. If the same small signal condition is given by a C-band pump, the C-band pump of a long wavelength is good for the saturation and noise characteristics of L-band signal. Finally, it is considered that in the aspect of saturation characteristics, C-band compensation is not so much efficient as L-band in Gain-Clamped L-band EDFA having a lossy resonator.
고정이득 L-band EDFA에서 발진 파장 및 방향에 따른 과도응답 특성
김익상,김창봉,양흥,손영호,Kim Ik sang,Kim Chang bong,Yang Heng,Sohn Young ho 한국통신학회 2005 韓國通信學會論文誌 Vol.30 No.3a
WDM(Wavelength Division Multiplexing) 광통신망의 노드에서 신호채널들이 분기 결합될 때 잔류채널들의 이득을 일정하게 제어해 주기 위해 고정이득 EDFA를 사용한다. 본 논문에서는 양방향 펌프에 의해 고이득을 가지는 L-band EDFA에서 발진광에 의해 입력변화를 보상해주는 방식으로 고정이득 EDFA를 구현하였다. 여기서 발진방향 및 파장에 따른 잔류채널의 과도응답 특성에 있어서 단파장 후방발진의 경우가 최적임을 확인할 수 있었다. The gain-clamped EDFA has been developed to eliminate the output power change of WDM surviving channels to occur with added or dropped channels, which degrades the performance of WDM optical network. It maintains the constant gain of surviving channels when WDM channels are added or dropped in a network amplifying node. In this paper, the hi-directionally pumped gain-clamped EDFA is implemented to compensate the change of the input power by a lasing. The results show that the lasing of a short wavelength and backward propagation is the optimal condition to minimize the transient response of surviving channels in terms of the overshoot and gain saturation due to the inhomogeneous broadening effect.
양방향 발진고리형 고정이득 EDFA에서의 잡음지수 특성
김익상,김창봉,이현재,明承一 대한전자공학회 2002 電子工學會論文誌-SD (Semiconductor and devices) Vol.39 No.4
FRLGC(Fiber Ring laser Gain Clamped) EDFA is demonstrated for an automatic gain control in bi-directional ADM(Add Drop Multiplexer) node configuration. Specifically, we investigate bi-directional characteristics of noise figure. Assuming a bi-directional small signal input, noise figures for forward or backward signal input are calculated using average inversion algorithm, according to the propagating directions and lasing wavelengths of a compensating signal. The operating condition of FRLGC-EDFA may be optimized with a backward lasing and short lasing wavelength in the aspect of bi-directional noise figure characteristics. 양방향 ADM 노드에서 자동이득제어를 위해 발진고리형 고정이득 EDFA를 적용할 경우 잡음지수 특성을 검토하고자 한다. 이를 위해 소신호 입력인 경우에 한해서 발진보상광의 발진방향 및 발진파장에 따른 잡음지수 특성을 평균밀도반전 알고리즘에 의해 계산하였고 실험적으로 확인하였다. 그 결과 단파장의 발진보상광이 광섬유고리에서 후방 발진을 일으킬 경우가 양방향의 소신호 잡음지수 측면에서는 가장 양호한 조건으로 판명되었다.
편광제어에 의한 파장가변 고리형 광섬유레이저에서의 파장천이특성
김익상 한국통신학회 2000 韓國通信學會論文誌 Vol.25 No.9
광섬유고리에 편광제어를 통해 여러 광경로들에 대해서 손실을 조정함으로써 손실이 작은 광경로에서 발진하게 함으로써 발진 파장을 가변시킬 수 있는 편광제어 파장가변 고리형 광섬유레이저를 구현하였다. 1.5mm의 공극을 가진 내부공진편광기를 사용하여 1nm의 종모드간격으로 발진을 일으킬 수 있었고 편광제어기 및 내부공진편광기를 조절해서 1540!1560 nm의 파장가변을 시킬 수 있었다. 또한 실험적으로 나타난 발진특성을 광경로와 복굴절 손실의 개념을 사용하여 발진출력의 파장천이특성을 분석하였다. Wavelength tunable fiber ring laser can be tuned by causing a resonance on the optical path having the least loss which is controlled by a polarization adjustment. It is observed that lasing wavelengths having 1 nm FSR(Free Spectral Range) can be tuned over the range of 1540-1560 nm when a polarization controller and an intra-cavit polarizer with 1.5 mm air gap are adjusted. The characteristics of wavelength shift in the laser output are analyzed by introducing an optical path modeling and the concept of a birefringence loss.