http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지방정부의 제4차 산업혁명 대응전략에 대한 정책 우선순위 분석
김건위(金虔?),현승현(玄承鉉) 한국지방자치학회 2018 韓國地方自治學會報 Vol.30 No.4
이 연구는 제4차 산업혁명 시대의 지방정부 대응전략 수립을 위한 방안으로서 정책우선순위를 분석하였다. 분석한 결과, 우선적으로 산업의 기초체질을 강화하는 것이 급선무이며, 이를 토대로 지역의 일자리 창출이 이루어져야 할 것이다. 또한, 공공부문의 지원도 병행되어야 할 것이다. 세부적으로 기존 정책의 상태 유지가 필요한 분야(창업 및 첨단화, 특화산업 등), 중앙정부의 선도적 지원이 필요한 분야(교육 및 핵심기술, 그리고 노사정 협업 등), 중장기적인 노력이 요구되는 분야(규제완화, 적극적 복지, 대학원 육성 등), 그리고 중요성은 낮으나 정책 실현 가능성이 높은 분야(동향분석 등) 등이다. 이를 통하여 중장기 대응책 마련과 지역산업의 집중적 육성이 필요하며, 아울러 교육까지 연계된 정책이 추진될 때에 시너지 효과를 거둘 수 있을 것이다. This study analyzed the priorities of policies as a way to establish a response strategy for local governments in the fourth industrial revolution. As a result of the analysis, it is imperative matter to strengthen the basic structure of the industry in the first place and create jobs in the region based on it. Also, public sector support will be needed. There are several areas in detail - areas that need to maintain the status of existing policies (start-up and modernization, special-purpose industries, etc.), areas requiring leading support of central government (education and core technologies, cooperation in labor, management, etc.), areas requiring active long-term efforts (deregulation, active welfare, graduate school development), and areas of low importance but highly likely to implement policies (trend analysis). This will require long-term countermeasures and intensive promotion of local industries, as well as synergy effects when policies linked to education are implemented.
양극산화 방법으로 제조한 P와 Ca가 도핑된 TiO2 나노튜브 박막
김건호,이정주,조성암 한국물리학회 2014 새물리 Vol.64 No.7
In this study, highly-ordered TiO2 nanotube (TNT) arrays were fabricated by using electrochemical anodization of Ti-foil in ethylene glycol electrolytes containing 0.4 wt% ~ 1 wt% NH4F and about 2 vol% H2O. Sodium glycerophosphate (0.3 mol%) and calcium acetate (0.02 mol%) were added in the electrolyte as Ca- and P- doping sources. Anodization was carried out at current density of about 20 to 150 mA/cm² for about 30 to 120 min. Well-ordered TNT arrays with average diameters from 50 to 120 nm and lengths from about 0.3 to about 1.5 μm were fabricated. The anatase TiO2 phase was formed by annealing at 400℃, it was changed to the rutile TiO2 phase by annealing at 600℃ and it was transformed to the rutile phase completely by annealing at 800℃. Energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) analyses showed that the overall doping level of P was 2.2 ~ 4.6 at% and that of Ca was 5.8 ~ 6.8 at%. We believe that our method for fabricating Ca- and P- doped TNT arrays on Ti plates is an effective method and is applicable to the development of TNT-based dental implants. 약 2 vol%의 물을 포함한 ethylene glycol에 약 0.4 wt% ~ 1 wt%의 NH$_{4}$F를 용해시킨 다음 0.3 mol%의 sodium glyeorophosphate 및 0.02 mol% calcium acetate를 첨가한 용액을 사용하여 양극산화 방법으로 P와 Ca가 도핑된 TiO2 나노튜브 박막을 제조하였다. 전류밀도 20 mA/cm² ~ 150 mA/cm²에서 30분에서 120분간 성장시켜 직경 50 nm~150 nm 범위, 길이 약 0.3 ~m ~ 1.5 μm에 이르는 나노튜브 array를 형성하였다. 형성된 나노튜브 array는 비정질이었으나 400℃에서 열처리함에 따라 anatase 상, 그리고 600℃ 이상의 온도에서 rutile 상으로 상전이하였으며, 800℃ 이상에서는 완전히 rutile 상으로 전이되었다. 에너지 분산 X-선 분광법 (EDS)과 광전자 분광법 (XPS)을 통해 나노튜브 내에 약 2.2 at% 에서 4.6 at%의 P와 5.8 at%에서 6.8 at%의 Ca이 도핑되어 있음을 확인하였다. 제작된 TiO$_{2}$ 나노튜브 어레이는 직경, 길이, 치밀도 그리고 상 (phase) 등 치과용 Ti 임플란트에 적용할 수 있을 것으로 기대되는 구조적 특성을 지니고 있었다.
균열 폭에 따른 콘크리트 구조물에서의 염화물 흡수 평가
김건수 ( Kun-soo Kim ),박기태 ( Ki-tae Park ),김재환 ( Jaehwan Kim ) 한국구조물진단유지관리공학회 2020 한국구조물진단유지관리공학회 논문집 Vol.24 No.6
철근 콘크리트 구조물에서의 염화물 침투에 따른 구조물의 열화는 주요한 문제로 이와 관련하여 현재까지 많은 연구들이 수행되고 있다. 콘크리트 구조물의 염화물 침투에 있어서 염화물 확산 이외에도 염화물 흡수에 의한 침투도 고려되어야 하며, 구조물의 사용기간 중에 발생되는 균열은 염화물 침투의 주 경로가 될 수 있기 때문에 이러한 변수들이 구조물의 내구성능 평가에 고려되어야 한다. 본 연구에서는 철근 콘크리트에 두 가지 균열 폭 (0.1 mm, 0.3 mm)을 발생 시킨 후, 염화물 흡수 실험을 실시하였다. 염화물 흡수 실험으로부터 흡수에 따른 무게 변화와 AgNO3 용액을 이용한 변색법으로 균열면에서의 염화물 침투 정도를 확인하였다. 변색 범위를 이용한 이미지 분석 또한 실시하였다. 흡수 시간 및 균열 폭이 증가하면 염화물 흡수량이 증가하는 것을 확인 하였다. 모든 균열 폭에서 1 시간 이내에 염화물이 철근 깊이까지 도달하였다. 또한 철근 계면을 통한 염화물 이동 가능성을 확인하였으며, 이는 철근 부식의 주요한 원인으로 작용할 수 있어 추가적인 실험을 통한 검증이 필요할 것으로 판단된다. Deterioration of reinforced concrete structure caused by chloride ingress is the main issue and regrading this, many studies have been investigated with both experiments and computational modelling. In addition to chloride diffusion, chloride sorption should be considered as a chloride transport mechanism in concrete structure and cracks formed in concrete structures are the main variable to evaluate the performance of the structures. In this study, after making two types of cracks width (0.1 and 0.3 mm) in reinforced concretes, chloride absorption tests were performed. Weight change and colour change using 0.1 AgNO<sub>3</sub> solution from the samples were performed to measure chloride ingress. Image processing was also carried out to quantify range of colour change in carck face. From the result, it were confirmed that the amount of chloride absorption increases with exposure time and increasing crack width, and chlorides reached at steel depth within 1 hour. It would be possible that chloride can move through interface bewteen steel and concrete, thereby further study regarding this is required.