Dislocation Density-Based Constitutive Model and Processing Map for T2 Copper During Isothermal and Time-Variant Deformation

Gang Chen,Yu Jin,Jing Wang,Cheng Zhang,Qiang Chen,Hongming Zhang,Xingjian Zhao,Zhiyong Li,Changhai Xie,Zhiming Du 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.9

Isothermal compression tests were carried out to study the hot deformation behavior of T2 copper under various conditions. The deformation parameters, such as temperature and strain rate, have strong influence on flow stress and microstructureevolution of the alloy. A unified dislocation density-based model considering dynamic recovery and recrystallization wasestablished. And material parameters of the developed model were optimized by genetic algorithm. Comparisons betweenthe experimental and model data demonstrates that the developed model can precisely describe the flow behavior at quitewide range of deformation conditions. Meanwhile, the designed iterative procedure allows the model to be applied in timevariantdeformation conditions. Processing map and microstructure examination were constructed to optimize the processingwindow of the studied alloy. According to the processing maps, flow instability mainly appeared at low temperatures of500–650 °C and strain rates higher than 0.1 s−1. The optimum deformation parameters of T2 copper was concluded as thetemperature range of 700–800 °C and the strain rate of 0.1–1 s−1.

Effect of oxidizing treatment on electrocatalytic activity of boron‑doped amorphous carbon thin films

Chen‑Song Wang,Ni Suo,Hao Huang,Ai‑min Wu,Guo‑Zhong Cao,Gui‑Feng Zhang 한국탄소학회 2019 Carbon Letters Vol.29 No.5

Boron-doped amorphous carbon (BDAC) thin films with a regular oxygen reduction reaction (ORR) catalytic activity were synthesized in a hot filament chemical vapor deposition device using a mixture of CH4 and H2 as a gas source and B2O3 as a boron source and then oxidized in air at 380–470 °C for 15–75 min. Scanning electron microscope, transmission electron microscope, Raman spectroscopy, X-ray photoelectron spectroscopy, and electrochemical tests were used to characterize the physical and electrochemical properties of the BDAC catalysts. It was concluded that the BDAC catalyst oxidized at 450 °C for 45 min showed the best ORR catalytic activity in alkaline medium. The oxygen reduction potential and the transfer electron number n, respectively, are − 0.286 V versus Ag/AgCl and 3.24 from the rotating disk electrode experiments. The treated carbon film has better methanol resistance and stability than the commercial Pt/C catalyst.

p‐Type InP Nanopillar Photocathodes for Efficient Solar‐Driven Hydrogen Production

Lee, Min Hyung,Takei, Kuniharu,Zhang, Junjun,Kapadia, Rehan,Zheng, Maxwell,Chen, Yu‐,Ze,Nah, Junghyo,Matthews, Tyler S.,Chueh, Yu‐,Lun,Ager, Joel W.,Javey, Ali WILEY‐VCH Verlag 2012 Angewandte Chemie Vol.124 No.43

<P><B>Perfekte Textur</B>: Der Einfluss der Oberflächen‐Nanotexturierung, der TiO<SUB>2</SUB>‐Passivierung und des Ru‐Cokatalysators auf die photoelektrochemische Wasserstoffentwicklung durch p‐InP‐Photokathoden wurde untersucht. Höhere Stromdichten und günstigere Onset‐Potentiale werden nach Oberflächen‐Nanotexturierung beobachtet. NHE=Normalwasserstoffelektrode.</P>

Experimental studies on elastic cooling and pyromagnetic effect ofpolyvinyl chloride sheets with defects

Yingshe Luo,Shengming Chen,Liang Zhang,Jianxin Su,Yongzhong Zhang3,Shuling Luo 한국유변학회 2012 Korea-Australia rheology journal Vol.24 No.3

Polyvinyl Chloride (PVC) sheets were made into samples with precast defects for uniaxial tensile test. The tests are carried out under room temperature with conditions of same displacement rate but different defect sizes or of same defect but different displacement rates. The local nonuniform temperature field on whole deformation area of specimen is recorded with a thermal infrared imager and the whole coupling magnetic field with thermal changes in experiments is detected and measured by a self-developed sensors system. The experimental results show that, in a complete tensile test process of PVC samples, the temperature reduction phenomenon emerges firstly in its elastic deformation stage (areas) that temperature of specimen is cooler than room temperature. And then in viscoplastic deformation period (areas), the temperature increases sharply to be obviously higher than room temperature due to the thermo-mechanical coupling effection of tensile load and viscoplastic deformation heat. These thermal variations lead a coupling pyromagnetic effect occur and the effect intensity is dependent strongly on the strain rate and/or the size of defects. The tem\-perature prejudgment conditions for materials yield are preliminary discussed based on this effect.

Biodegradable cross-linked poly(L-lactide-co-e-caprolactone) networks for ureteral stent formed by gamma irradiation under vacuum

Xiliang Liu,Song Liu,Youkun Fan,Jin Qi,Xin Wang,Wei Bai,Dongliang Chen,Chengdong Xiong,Lifang Zhang 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.104 No.-

The poly(L-lactide-co-e-caprolactone) (PLCL) ureteral stent creeps and loses shape stability, increasingthe risk of stent tube dislocation. The rubbery biodegradable cross-linked PLCL networks were preparedthrough gamma irradiation under vacuum in the presence of trimethylolpropane triacrylate (TMPTA),pentaerythritol tetraacrylate (PET4A), and pentaerythritol triacrylate (PETA). At a standard sterilizationdose of 25 kGy, the gel content and network density of PLCL networks increased with increasingcrosslinking agent content (1, 3, 5, 7 wt%), and crosslinking efficiency decreased in the order ofPETA > PET4A > TMPTA. The average molecular weight (Mc ) between two crosslinks ranged from 2000to 105 g/mol. To perform the beneficial semi-interpenetrated polymer network and characterized bythe principle, the networks were processed in several doses (25, 50, 75, 100, and 125 kGy). In place ofthe Charlesby-Pinner equation, the irradiation cross-linking followed the Chen-Liu-Tang equation. ThePLCL network with 7 wt% PETA had a gel fraction of 83%, tensile strength of 34.7 MPa, and tensile setvalue as low as 5%. Furthermore, degradation in vitro was slowed down. Thus, PLCL networks with appropriateelasticity and flexibility, inherent biodegradability, and excellent biocompatibility can provide apromising alternative method for soft tissue repair engineering, such as ureteral stents.

Effects of dietary supplementation with different fermented feeds on performance, nutrient digestibility, and serum biochemical indexes of fattening lambs

Zhang Chen,Zhang Chongyu,Du Meiyu,Wang Yunpeng,Zhang Guiguo,이윤경 아세아·태평양축산학회 2021 Animal Bioscience Vol.34 No.4

Objective: The effects of adding fermented feed to a pelleted total mixed ration (PTMR) on the growth performance of lambs remain unclear. The present study aimed to investigate the feed efficiency and productivity of lambs that were fed PTMR containing fermented soybean meal (FSM) or wheat bran (FWB). Methods: Sixty 90-d-old hybrid lambs were randomly allocated into 12 pens (5 lambs/pen) that were randomly assigned to 4 dietary treatments (3 pens/treatment) with PTMR (basal diet), 2% FSM, or Lactobacillus- or yeast-FWB (L-FWB or Y-FWB) addition in the basal diet. Results: The findings showed that lambs fed 2% FSM supplemented diet had enhanced (p<0.05) average daily gain (ADG) and carcass yield (p = 0.015), while they had a decreased (p = 0.006) feed conversion ratio compared to that of other three groups. Inclusion of FSM or FWB in PTMR improved (p<0.05) the nutrient digestibility, while it reduced the urea nitrogen content in serum compared to the PTMR group. Additionally, the decreased ratio of N excretion to ADG (p<0.01) was observed with FSM and L-FWB supplementation compared with the PTMR and Y-FWB groups. Conclusion: In conclusion, feeding the fermented feed-supplemented diet improved nutrient digestibility and growth performance, and 2% FSM-supplemented diet exhibited superior production-promoting efficiency to lambs. Objective: The effects of adding fermented feed to a pelleted total mixed ration (PTMR) on the growth performance of lambs remain unclear. The present study aimed to investigate the feed efficiency and productivity of lambs that were fed PTMR containing fermented soybean meal (FSM) or wheat bran (FWB).Methods: Sixty 90-d-old hybrid lambs were randomly allocated into 12 pens (5 lambs/pen) that were randomly assigned to 4 dietary treatments (3 pens/treatment) with PTMR (basal diet), 2% FSM, or <i>Lactobacillus</i>- or yeast-FWB (L-FWB or Y-FWB) addition in the basal diet.Results: The findings showed that lambs fed 2% FSM supplemented diet had enhanced (p<0.05) average daily gain (ADG) and carcass yield (p = 0.015), while they had a decreased (p = 0.006) feed conversion ratio compared to that of other three groups. Inclusion of FSM or FWB in PTMR improved (p<0.05) the nutrient digestibility, while it reduced the urea nitrogen content in serum compared to the PTMR group. Additionally, the decreased ratio of N excretion to ADG (p<0.01) was observed with FSM and L-FWB supplementation compared with the PTMR and Y-FWB groups.Conclusion: In conclusion, feeding the fermented feed-supplemented diet improved nutrient digestibility and growth performance, and 2% FSM-supplemented diet exhibited superior production-promoting efficiency to lambs.

Anomalous magnetization jumps in granular Pb superconducting films

Zhang An-Lei,Jiang Wan-Yan,Chen Xing-Hong,Zhang Xiao-Ke,Lu Wen-Lai,Chen Fei,Feng Zhen-Jie,Cao Shi-Xun,Zhang Jin-Cang,Ge Jun-Yi 한국물리학회 2022 Current Applied Physics Vol.35 No.-

In granular superconductors, the grain boundaries are closely related to the vortex dynamics and the macroscopic superconducting properties. In our research, Pb films with different grain sizes were prepared by tuning the substrate temperature. With the grain size decreasing, Pb films are prone to feature the anomalous magnetization jumps in the M − T curves, while in the M − H curves flux avalanche happens. Both phenomena appear in the same region of the H − T phase diagram and thus are considered to have the same origin. The further theoretical analysis shows that with grain size decreasing the pinning mechanism evolves from a mixed δTc and δl pinning to the δl pinning mechanism. The results shed light on the study of pinning mechanism for granular superconductors and is beneficial to the potential application of manipulating vortex pinning by regulation of intrinsic defects.

EMI Noise Source Reduction of Single-Ended Isolated Converters Using Secondary Resonance Technique

Zhang-yong Chen,Yong Chen,Qiang Chen,Wei Jiang,Rongqiang Zhong 전력전자학회 2019 JOURNAL OF POWER ELECTRONICS Vol.19 No.2

Aiming at the problems of large dv/dt and di/dt in traditional single-ended converters and high electromagnetic interference (EMI) noise levels, a single-ended isolated converter using the secondary resonance technique is proposed in this paper. In the proposed converter, the voltage stress of the main power switch can be reduced and the voltage across the output diode is clamped to the output voltage when compared to the conventional flyback converter. In addition, the peak current stress through the main power switch can be decreased and zero current switching (ZCS) of the output diode can be achieved through the resonance technique. Moreover, the EMI noise coupling path and an equivalent model of the proposed converter topology are presented through the operational principle of the proposed converter. Analysis results indicate that the common mode (CM) EMI noise and the differential mode (DM) EMI noise of such a converter are deduced since the frequency spectra of the equivalent controlled voltage sources and controlled current source are decreased when compared with the traditional flyback converter. Furthermore, appropriate parameter selection of the resonant circuit network can increase the equivalent impedance in the EMI coupling path in the low frequency range, which further reduces the common mode interference. Finally, a simulation model and a 60W experimental prototype of the proposed converter are built and tested. Experimental results verify the theoretical analysis.

Risk Factors for Cervical Cancer in Rural Areas of Wuhan China: a Matched Case-control Study

Zhang, Bin,Zhou, Ai-Fen,Zhu, Chang-Cai,Zhang, Ling,Xiang, Bing,Chen, Zhong,Hu, Rong-Hua,Zhang, Ya-Qi,Qiu, Lin,Zhang, Yi-Ming,Xiong, Chao-Du,Du, Yu-Kai,Shi, Yu-Qin Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.12

Cervical cancer is a serious public health problem in developing countries. We investigated possible risk factors for cervical cancer in rural areas of Wuhan China using a matched case-control study with 33 women diagnosed with cervical cancer and 132 healthy women selected from the same area as matched controls. A questionnaire, which included questions about general demography conditions, environmental and genetic factors, the first sexual intercourse, first marriage age, age at first pregnancy, pregnancy first child's age, female personal health history, social psychological factors, dietary habits, smoking and alcohol status and other living habits was presented to all participants. At the same time, HPV infection of every participant was examined in laboratory testing. Results showed HPV infection (P<0.000, OR=23.4) and pregnancy first child's age (P<0.000, OR=13.1) to be risk factors for cervical cancer. Menopause (P=0.003, OR=0.073) was a protective factor against cervical cancer. However, there was no indication of associations of environmental (drinking water, insecticide, disinfectant) genetic (cancer family history), or life-style factors (smoking status, alcohol status, physical training, sleep quality), including dietary habits (intake of fruit and vegetable, meat, fried food, bean products and pickled food) or social psychological factors with cervical cancer. The results suggest that the risk of cervical cancer in Chinese rural women may be associated with HPV infection, menopause and the pregnancy first child's age.

The Site-Directed A184S Mutation in the HTH Domain of the Global Regulator IrrE Enhances Deinococcus radiodurans R1 Tolerance to UV Radiation and MMC Shock

( Chen Zhang ),( Zhengfu Zhou ),( Wei Zhang ),( Zhen Chen ),( Yuan Song ),( Wei Lu ),( Min Lin ),( Ming Chen ) 한국미생물 · 생명공학회 2015 Journal of microbiology and biotechnology Vol.25 No.12

IrrE is a highly conserved global regulator in the Deinococcus genus and contributes to survival from high doses of UV radiation, ionizing radiation, and desiccation. Drad-IrrE and Dgob-IrrE from Deinococcus radiodurans and Deinococcus gobiensis I-0 each share 66% sequence identity. However, Dgob-IrrE showed a stronger protection phenotype against UV radiation than Drad-IrrE in the D. radiodurans irrE-deletion mutant (ΔirrE), which may be due to amino acid residues differences around the DNA-binding HTH domain. Site-directed mutagenesis was used to generate a Drad-IrrE A184S single mutant, which has been characterized and compared with the ΔirrE mutant complemented strain with Drad-irrE, designated ΔirrE-E. The effects of the A184S mutation following UV radiation and mitomycin C (MMC) shock were determined. The A184S mutant displayed significantly increased resistance to UV radiation and MMC shock. The corresponding A184 site in Dgob-IrrE was inversely mutated, generating the S131A mutant, which exhibited a loss of resistance against UV radiation, MMC shock, and desiccation. qPCR analysis revealed that critical genes in the DNA repair system, such as recA, pprA, uvrA, and ddrB, were remarkably induced after UV radiation and MMC shock in the ΔirrE-IE and A184S mutants. These data suggested that A184S improves the ability against UV radiation and MMC shock, providing new insights into the modification of IrrE. We speculated that the serine residue may determine the efficiency of DNA binding, leading to the increased expression of IrrE-dependent genes important for protection against DNA damage.