http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임플란트 hexagon 높이에 따른 임플란트와 주위 조직의 응력분포 평가
박성재,김주현,김소연,윤미정,고석민,허중보 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1
PURPOSE. To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. MATERIALS AND METHODS. Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ∅4.0 mm×11.5 mm OsstemUSII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture’s external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group’s implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. RESULTS. The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2 mm, there was no significant influence on the stress distribution. CONCLUSION. For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed. 연구 목적: 본 연구는 hexagon 높이에 따른 임플란트 각 부위와 주위 지지조직의 응력분포를 3차원 유한요소 해석을 통해 평가하여 hexagon 높이가 기계적 안정성에 미치는 영향을 평가하고자 시행되었다. 연구 재료 및 방법: 외측 연결 형태의∅L4.0 mm×11.5 mm USII (Osstem Co., Pusan, Korea) 임플란트 시스템을 이용하여 하악 제 1대구치 부위에 임플란트를 식립하여 보철 수복한 경우를 연구 모델로 가정하고 임플란트 고정체의 외측 연결부인 hexagon의 높이를 각각 0.0 mm, 0.7 mm, 1.2 mm, 1.5 mm로 적용한 CAD data를 유한요소 모형화하였다. ABAQUS 6.4 (ABAQUS Inc., Providence, RI, USA)를 이용하여 산출된 응력 값 중에서 등가응력을 기준으로 각 요소(상부 치관, 지대주 나사, 고정체, 치밀골, 해면골)에서 나타나는 최대 응력 값을 비교 하였다. 결과:외측 연결을 갖는 임플란트의 hexagon의 높이는 고정체, 지대주 나사, 상부 보철물 그리고 주위 지지골에 대해 응력 분산에 영향을 주었다. Hexagon의 높이가 증가할 수록 임플란트의 응력 분산은 더 잘 이루어졌으며, 최대 응력 값의 감소를 보였다. Hexagon의 높이가 1.2 mm 이상이 되면 응력 분포에 더 이상 크게 기여하지 않았다. 결론: 외측연결을 갖는 임플란트에서 hexagon은 응력 분산에 필수적인 요소이며 그 높이가 증가할수록 더욱 효과적인 응력의 분산이 나타났다.
산전 진단된 Klippel-Trenaunay-Weber 증후군
권소영 ( So Young Kwon ),김윤아 ( Yun Ah Kim ),이종원 ( Jong Won Lee ),김수진 ( Su Jin Kim ),이경진 ( Kyoung Jin Lee ),박지현 ( Ji Hyeun Park ),정창조 ( Chang Jo Chung ) 대한주산의학회 2003 Perinatology Vol.14 No.4
Klippel-Trenaunay-Weber 증후군은 혈관종 편측 사지의 비후 및 동정맥 기형을 특징으로 하는 매우 드문 질환이다. 현재까지 알려진 정확한 유전 양식과 병인은 없다. 임상 양상 및 예후는 혈관종의 위치, 크기, 발현 시기에 따라 다르다. 산전 진단된 증례들은 빠른 진행을 보이거나 혈관종 내의 소모성 응고장애, 고박출성 심부전 등의 불량한 예후를 보인다. 산전 진단된 중증의 경우에는 임신 종결을 권장할수 있다. 신생아 치료는 비수술적 요법이 원칙이나 일부에서는 수술적 치료의 도움을 받을 수 있다. 최근 들어 초음파의 발달과 함께 산전에 조기 진단이 가능하게 되었다. 본원에서는 임신 제 2기에 산전 초음파 검사로 진단된 Klippel-Trenaunay-Weber 증후군을 진단하여 임신 종결하였기에 산전 초음파 소견에 대한 간단한 문헌 고찰과 함께 보고하는 바이다. Klippel-Trenaunay-Weber syndrome is a rare sporadically occurring congenital soft tissue anomaly characterized by cutaneous hemangiomata, hemihypertrophy and occasionally arteriovenous malformations(AVMs). No definite genetic defect has been identified. The appearance is a soft tissue mass of an extremity, usually affecting the adjacent trunk, hydrops fetalis, ascites, abdominal hemangiomatous masses, and hepatomegaly. When diagnosed prenatally, the disorder may be severe. Thrombocytopenia due to platelet consumption within the hemangioma and high output cardiac failure may complicate the outcome. Termination of pregnancy can be offered in severe forms, otherwise no alteration of management in expected. The management of newborns is primarily nonoperative, but some may benefit from surgical intervention. We report a case of Klippel-Trenaunay-Weber syndrome diagnosed prenatally by ultrasonogram in the second trimester and subsequently was terminated, with a brief review of literature.
고전력 전송이 가능한 Ka 대역 E-평면 T형 분기 도파관 다이플렉서의 설계 및 구현
윤소현,엄만석,염인복,Yun So-Hyeun,Uhm Man-Seok,Yom In-Bok 한국전자파학회 2005 한국전자파학회논문지 Vol.16 No.7
본 논문에서는 E-평면 T형 분기 도파관을 갖는 Ka대역(20/30 GHz) 다이플렉서의 설계 및 구현에 관해 논하였다. 본 논문의 도파관 다이플렉서는 송신 필터 및 수신 필터를 E-평면 T형 분기 도파관으로 연결하여 E-평면으로 대칭이 되도록 하였다. T형 분기 도파관을 E-평면으로 선택한 이유는 제작시 생기는 절단면을 전류 밀도가 가장 낮은 지역에 두어 PIM(Passive Intermodulation) 레벨을 줄이기 위해서이다. 본 논문의 다이플렉서는 등가 모델을 사용하여 최적 설계를 수행함으로써 해석 시간을 줄이고자 하였다. 또한, 고전력 전송이 가능한 구조로 설계한 후 멀티팩션 해석을 수행하였으며, 해석 결과는 12 dB 마진을 확보하여 ESA/ESTEC 권고 사항을 만족함을 보였다. 제작된 다이플렉서는 전기적 성능 시험 결과를 통해 송수신 대역에서 반사 손실 22 dB 이상, 삽입 손실 0.20 dB 이하, 그리고 -40 dB 이하의 격리도 특성을 가져 요구 사항을 만족함을 보였고, 이로써 설계 결과가 검증되었다. In this paper, the design and implementation of the Ka-band(20/30 GHz) waveguide diplexer with an E-plane T-junction are described. The waveguide diplexer consists of a transmit filter and a receive filter combined to the antenna port via an E-plane T-junction. The reason why the E-plane T-junction structure was selected is to reduce PIM(Passive Intermodulation) level as the split-plane is located in the low electrical current zone. The optimization was performed using the equivalent circuit so that the computation time might reduce. The structure of the diplexer was designed to handle high power and the multipaction analysis was performed. The multipaction margin was greater than 12 dB and satisfied with ESA/ESTEC recommendation. The manufactured diplexer shows minimum return loss of 22 dB, maximum insertion loss of 0.20 dB and maximum isolation of -40 dB for both transmitted receive bands. Those mean the analysis results of the waveguide diplexer were well agreed with the electrical performance test.