One Dimensional Thaw Consolidation Behaviors with Periodical Thermal Boundaries

Wenli Wang,Lanmin Wang,Fan Yu,Qian Wang 대한토목학회 2016 KSCE JOURNAL OF CIVIL ENGINEERING Vol.20 No.4

In this paper, one dimensional thaw consolidation behaviors with periodical thermal boundaries were studied. A new numerical simulation method was proposed to implement thaw consolidation calculation. Thaw consolidation tests were conducted to verify the validity of new proposed method. It was proved that the simulated data have a good agreement with tested results. Due to the influence of periodical thermal boundary, Thaw Consolidation Degree (TCD) changes periodically, which is the most significant difference from that of constant thermal boundary problems. At the same time, peak values of TCD in each freeze-thaw cycle decreases continuously with time and tends to be the value of TCD0 obtained from constant thermal boundary, which is equal to the corresponding average temperature of periodical thermal boundary. The attenuation process of TCD is proportionally related to thaw consolidation Ratio (R).

A Fast Kernel Regression Framework for Video Super-Resolution

( Wen-sen Yu ),( Ming-hui Wang ),( Hua-wen Chang ),( Shu-qing Chen ) 한국인터넷정보학회 2014 KSII Transactions on Internet and Information Syst Vol.8 No.1

A series of kernel regression (KR) algorithms, such as the classic kernel regression (CKR), the 2- and 3-D steering kernel regression (SKR), have been proposed for image and video super-resolution. In existing KR frameworks, a single algorithm is usually adopted and applied for a whole image/video, regardless of region characteristics. However, their performances and computational efficiencies can differ in regions of different characteristics. To take full advantage of the KR algorithms and avoid their disadvantage, this paper proposes a kernel regression framework for video super-resolution. In this framework, each video frame is first analyzed and divided into three types of regions: flat, non-flat-stationary, and non-flat-moving regions. Then different KR algorithm is selected according to the region type. The CKR and 2-D SKR algorithms are applied to flat and non-flat-stationary regions, respectively. For non-flat-moving regions, this paper proposes a similarity-assisted steering kernel regression (SASKR) algorithm, which can give better performance and higher computational efficiency than the 3-D SKR algorithm. Experimental results demonstrate that the computational efficiency of the proposed framework is greatly improved without apparent degradation in performance.

Bridge modal identification based on frequency variation caused by a parked vehicle

Wen-Yu He,Wei-Xin Ren,Quan Wang,Zuo-Cai Wang 국제구조공학회 2022 Structural Engineering and Mechanics, An Int'l Jou Vol.84 No.3

Modal parameters are the main dynamic characteristics of bridge. This study aims to propose an innovative route to estimate the modal parameters for bridges by using a parked vehicle in which mode shapes with high accuracy and spatial resolution are identified by frequency measurement. Based on the theory of dynamic modification and modal identification, the mathematical formulation between the parked mass induced frequency variation and the modal parameters of a bridge is derived. Then this mathematical formulation is extended to a parked vehicle-bridge system. The arithmetic and processes for estimating the modal parameters based on the identified frequency variation of the vehicle-bridge systems when the vehicle locates at sequentially arranged positions are presented. Finally the proposed method is applied to several simulated bridges of different types. The results indicate that it can estimate the modal parameters with high accuracy and efficiency.

TAZ as a novel regulator of oxidative damage in decidualization via Nrf2/ARE/Foxo1 pathway

Yu Hai-Fan,Zheng Lian-Wen,Yang Zhan-Qing,Wang Yu-Si,Wang Ting-Ting,Yue Zhan-Peng,Guo Bin 생화학분자생물학회 2021 Experimental and molecular medicine Vol.53 No.-

TAZ, as a crucial effector of Hippo pathway, is required for spermatogenesis and fertilization, but little is known regarding its physiological function in uterine decidualization. In this study, we showed that TAZ was localized in the decidua, where it promoted stromal cell proliferation followed by accelerated G1/S phase transition via Ccnd3 and Cdk4 and induced the expression or activity of stromal differentiation markers Prl8a2, Prl3c1 and ALP, indicating the importance of TAZ in decidualization. Knockdown of TAZ impeded HB-EGF induction of stromal cell proliferation and differentiation. Under oxidative stress, TAZ protected stromal differentiation against oxidative damage by reducing intracellular ROS and enhancing cellular antioxidant capacity dependent on the Nrf2/ARE/Foxo1 pathway. TAZ strengthened the transcriptional activity of Nrf2 which directly bound to the antioxidant response element (ARE) of Foxo1 promoter region. Additionally, silencing TAZ caused accumulation of intracellular ROS through heightening NOX activity whose blockade by APO reversed the disruption in stromal differentiation. Further analysis revealed that TAZ might restore mitochondrial function, as indicated by the increase in ATP level, mtDNA copy number and mitochondrial membrane potential with the reduction in mitochondrial superoxide. Additionally, TAZ modulated the activities of mitochondrial respiratory chain complexes I and III whose suppression by ROT and AA resulted in the inability of TAZ to defend against oxidative damage to stromal differentiation. Moreover, TAZ prevented stromal cell apoptosis by upregulating Bcl2 expression and inhibiting Casp3 activity and Bax expression. In summary, TAZ might mediate HB-EGF function in uterine decidualization through Ccnd3 and ameliorate oxidative damage to stromal cell differentiation via Nrf2/ARE/Foxo1 pathway.

Measurement of neutron cross sections and resonance parameters of ¹⁶⁹Tm below 100 eV

Wen-Ming, Wang,Xia, Li,Zhi-Xiang, Zhao,Zu-Ying, Zhou,Hong-Wei, Yu,Hai-Cheng, Wu,Yi-Xiang, Wei,Wang, T. F.,Kim, G. N.,Lee, M. W.,Kim, K. S.,Cho, M. H.,Ko, I. S.,Namkung, W. science press 2010 Chinese physics. C Vol.34 No.2

<P>The neutron total cross-sections of thulium (<SUP>169</SUP>Tm) were measured in the neutron energy region from 0.01 eV to 100 eV by using the time-of-flight method at the Pohang Neutron Facility, which consists of an electron linac, a water-cooled tantalum target with a water moderator, and a 12 m time of flight path. Two thulium plates with different thicknesses were used for the neutron transmission measurement. The background level was determined by using a notch-filter of Co, In, and Cd sheets. The present measurement was compared with the previous ones, and a new set of resonance parameters of <SUP>169</SUP>Tm isotope was obtained from the transmission rate by using the SAMMY code, with a comparison with the recommended parameters by Mughabghab.</P>

Role of Grain Refinement Mechanism on Microstructure and Performance in AZ31B Alloy During Interactive Alternating Forward Extrusion (AFE) Process

Yu Wang,Feng Li,Ye Wang,Qiang Chen,Xue Wen Li,Wen Bin Fang 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.4

In this study, interactive alternate forward extrusion (AFE) experiments with varying number of extrusion passes of AZ31magnesium alloy were carried out. The evolution of microstructure, and texture and their effects on the mechanical propertieswere studied. The results show that with the increase of loading passes, the grains are significantly refined, and thedynamic recrystallisation (DRX) structure is uniformly distributed in the product, which is the main reason for the increasein microhardness, compressive strength and failure strain. Further, slip and twinning induced DRX behaviour are consideredto be the main deformation methods in the early stage of deformation. Whereas continuous DRX is considered to be the maindeformation methods for the change in grain morphology in the later stage. During the extrusion process, the deflection angleof the base pole decreases. Finally, the fibre texture is formed; the texture strength is significantly reduced because of theeffect of recrystallisation. The AZ31 magnesium alloy interactive AFE process is discussed with respect to the technologicalexperiment and the microstructure deformation, thus providing a vital scientific basis for further application.

Ballistic transport in 5.1 nm monolayer boron phosphide transistors for high-performance applications

Wang Yu,Chen Wen,Jing Sicheng,Pan Jinghua,Wang Danni,Ma Zelong,Bian Baoan 한국물리학회 2023 Current Applied Physics Vol.52 No.-

Boron Phosphide is reported to be a semiconductor material with anisotropy, tunable bandgap, and high carrier mobility. We study the performance of 5.1 nm metal–oxide–semiconductor field-effect transistors (MOSFETs) based on boron phosphide using quantum transport simulation. The calculated results show that the on-state current can fulfill the requirements of the International Semiconductor Technology Roadmap (ITRS) for high-performance (HP) devices at the optimal doping concentration, but the gate control capability is not ideal. Furthermore, it is found that the gate control capability and on-state current can be significantly improved with the length being 1 nm by using the underlap (UL) structure. We also study the performance of boron phosphide MOSFET with different gate lengths (5–8 nm), and the results suggest that the shorter the gate length, the worse the gate control capability. Interestingly, the p-type boron phosphide MOSFET always outperforms the n-type MOSFET. This work will provide a new reference for the development of two-dimensional (2D) semiconductor devices.

Improving Cellulase Production in Trichoderma koningii Through RNA Interference on ace1 Gene Expression

( Wang Shao Wen ),( Miao Xing ),( Gang Liu ),( Shao Wen Yu ),( Juan Wang ),( Sheng Li Tian ) 한국미생물 · 생명공학회 2012 Journal of microbiology and biotechnology Vol.22 No.8

Ribonucleic acid interference (RNAi) inhibits the expression of target genes in a sequence-specific manner, and shows potential for gene knockdown in filamentous fungi, in which the locus-specific gene knockout occurs in low frequency. In this study, the function of the repressor of cellulase expression I (ACEI) was verified in Trichoderma koningii (T. koningii) YC01 through RNAi, and ace1-silenced strains with improved cellulase productivity were obtained. An expression cassette that transcribed the interfering double-stranded RNA (dsRNA) of ace1 was constructed and transformed into T. koningii, and the transformants, in which the expression of ace1 was successfully silenced, were selected. As a result of the ace1 gene silencing, the expression levels of the main cellulase and xylanase genes were elevated, and the enhanced production of total proteins, cellulase, and xylanase was observed in the cultivation. In addition, the downregulation of ace1 resulted in an increasing expression of xyr1, but no clear variation in the expression of cre1, which suggested that ACEI acted as a repressor of the xyr1 transcription, but was not involved in the regulation of the cre1 expression. The results of this work indicate that ace1 is a valid target gene for enhancing enzyme production in T. koningii, and RNAi is an appropriate tool for improving the properties of industrial fungi.

Identification of a Novel Human Lysophosphatidic Acid Acyltransferase, LPAAT-theta, Which Activates mTOR Pathway

( Wen Wen Tang ),( Jian Yuan ),( Xin Ya Chen ),( Xiu Ting Gu ),( Kun Tian Luo ),( Jie Li ),( Bo Wan ),( Ying Li Wang ),( Long Yu ) 생화학분자생물학회 2006 BMB Reports Vol.39 No.5

A Comparative Study of Camouflage Printing Color Matching Based on Monitor and Paper Card

Yu-wen Wang,Qing-zhu Yi,Yi Ding,Guang-xin Wu,Jing-bin Zhang,Ni Wang 한국섬유공학회 2021 Fibers and polymers Vol.22 No.4

To improve the accuracy of color reproduction for camouflage printing, a new color matching method, namedmonitor-paper-fabric, was proposed by importing color management into textiles, which matched the printing pastesaccording to the color of the paper card printed by the ink-jet printer after color management. Not like the traditional colormatching method, it matched the printing pastes according to the color from computer monitor after color correction. Twocolor matching methods were analyzed by comparing the color difference. It was found that the “monitor-paper-fabric” colormatching method could be considered as a convenient and feasible color matching method. Most color differences betweenthe monitor and the fabric in the camouflage pattern were reduced to lower than 4, except for color blocks 5 and 6. Inaddition, the color differences of six color blocks between the paper and the fabric were all less than 3.5, and were lower thanthose between the monitor and the fabric. The color consistency between the paper and the fabric was better than thatbetween the monitor and the fabric.