Localization of QTLs for Husk Proportion and Lignin Content Using a High-Density Genetic Linkage Map of Brassica napus

Fu You Fu,Lie Zhao Liu,You Rong Chai,Li Chen,Tao Yang,Ai Fen Ma,Cun Ming Qu,Lin Jiang,Zheng Sheng Zhang,Jia Na Li 한국유전학회 2007 Genes & Genomics Vol.29 No.3

Husk proportion (HP) and lignin content (LC) are two important traits of seed quality of B. napus. Efficient selection of these two traits is an important way to improve the seed quality in meal improvement. A set of recombinant inbred lines (RILs) of B. napus (GH06 × Zhongyou 821) was used for mapping QTLs of HP and LC in a two-year study in different environments. 509 markers (78 SSR markers, 66 RAPD markers and 365 SRAP markers) were mapped on 26 linkage groups with an average length of 73.96 cM. The map covered a total of 1923 cM, and the average distance between two adjacent markers was 3.78 cM. Analysis of variance of LC and HP indicated that. LC might not be significantly affected by environment (F = 2.96 < 3.02) and HP might be affected by genotype × environment interactions. A total of 15 significant QTLs were detected in eight linkage groups with a LOD threshold value of 2.5 (LR ≥ 11.5) by CIM, explaining 4.99-16.14% of phenotype variation. Some QTLs of LC and HP were detected in near regions of the same linkage groups, such as qLCBB05-6-1 and qLCWZ06-6-1, qLCBB05-10-2 and qLCBB06-10-1 and qLCWZ06-10-2, qHPBB05-9-3 and qHPBB06-9-1, qHPBB05-10-4 and qHPBB06-10-2 and qHPBB06-10-3 and qHPWZ06-10-1. This study indicates that the repeatedly detected QTLs of LC and HP might be major-effect QTLs of LC and HP.

Hybridizing gaining–sharing knowledge and differential evolution for large-scale power system economic dispatch problems

Liu Qinghua,Xiong Guojiang,Fu Xiaofan,Mohamed Ali Wagdy,Zhang Jing,Al-Betar Mohammed Azmi,Chen Hao,Chen Jun,Xu Sheng 한국CDE학회 2023 Journal of computational design and engineering Vol.10 No.2

Economic dispatch (ED) of thermal power units is significant for optimal generation operation efficiency of power systems. It is a typical nonconvex and nonlinear optimization problem with many local extrema when considering the valve-point effects, especially for large-scale systems. Considering that differential evolution (DE) is efficient in locating global optimal region, while gain-sharing knowledge-based algorithm (GSK) is effective in refining local solutions, this study presents a new hybrid method, namely GSK-DE, to integrate the advantages of both algorithms for solving large-scale ED problems. We design a dual-population evolution framework in which the population is randomly divided into two equal subpopulations in each iteration. One subpopulation performs GSK, while the other executes DE. Then, the updated individuals of these two subpopulations are combined to generate a new population. In such a manner, the exploration and the exploitation are harmonized well to improve the searching efficiency. The proposed GSK-DE is applied to six ED cases, including 15, 38, 40, 110, 120, and 330 units. Simulation results demonstrate that GSK-DE gives full play to the superiorities of GSK and DE effectively. It possesses a quicker global convergence rate to obtain higher quality dispatch schemes with greater robustness. Moreover, the effect of population size is also examined.

Amylosporus sulcatus sp. nov. (Russulales, Basidiomycota) from Southern China

( Fu-chang Huang ),( Bin Liu ),( Hao Wu ),( Pei-sheng Qin ),( Jin-feng Li ) 한국균학회 2018 Mycobiology Vol.46 No.4

Amylosporus sulcatus sp. nov. is described from Nonggang Nature Reserve, southern China, on the basis of morphological and molecular data. The morphological description and illustrations for the new species are provided. The species is characterized by pileate and stipitate basidiocarps. The pileus surface is obviously concentrically and radiately sulcate and tomentum, and the pore surface is snow white. Phylogenetic analyses based on sequences of the internal transcribed spacer and nuclear large subunit ribosomal DNA confirmed it to be a new species.

Exogenous p53 Upregulated Modulator of Apoptosis (PUMA) Decreases Growth of Lung Cancer A549 Cells

Liu, Chun-Ju,Zhang, Xia-Li,Luo, Da-Ya,Zhu, Wei-Feng,Wan, Hui-Fang,Yang, Jun-Ping,Yang, Xiao-Jun,Wan, Fu-Sheng Asian Pacific Journal of Cancer Prevention 2015 Asian Pacific journal of cancer prevention Vol.16 No.2

Purpose: To investigate the influence of exogenous p53 upregulated modulator of apoptosis (PUMA) expression on cell proliferation and apoptosis in human non-small cell lung cancer A549 cells and transplanted tumor cell growth in nude mice. Materials and Methods: A549 cells were divided into the following groups: control, non-carrier (NC), PUMA (transfected with pCEP4-(HA) 2-PUMA plasmid), DDP ($10{\mu}g/mL$ cisplatin treatment) and PUMA+DDP (transfected with pCEP4-(HA)2-PUMA plasmid and $10{\mu}g/mL$ cisplatin treatment). The MTT method was used to detect the cell survival rate. Cell apoptosis rates were measured by flow cytometry, and PUMA, Bax and Bcl-2 protein expression levels were measured by Western blotting. Results: Compared to the control group, the PUMA, DDP and PUMA+DDP groups all had significantly decreased A549 cell proliferation (p<0.01), with the largest reduction in the PUMA+DDP group. Conversely, the apoptosis rates of the three groups were significantly increased (P<0.01), and the PUMA and DDP treatments were synergistic. Moreover, Bax protein levels significantly increased (p<0.01), while Bcl-2 protein levels significantly decreased (p<0.01). Finally, both the volume and the weights of transplanted tumors were significantly reduced (p<0.01), and the inhibition ratio of the PUMA+DDP group was significantly higher than in the single DDP or PUMA groups. Conclusions: Exogenous PUMA effectively inhibited lung cancer A549 cell proliferation and transplanted tumor growth by increasing Bax protein levels and reducing Bcl-2 protein levels.

Modification of DC Flashover Voltage at High Altitude on the Basis of Molecular Gas Dynamics

Liu, Dong-Ming,Guo, Fu-Sheng,Sima, Wen-Xia The Korean Institute of Electrical Engineers 2015 Journal of Electrical Engineering & Technology Vol.10 No.2

The effect of altitude on thermal conduction, surface temperature, and thermal radiation of partial arc was investigated on the basis of molecular gas dynamics to facilitate a deep understanding of the pollution surface discharge mechanism. The DC flashover model was consequently modified at high altitude. The validity of the modified DC flashover model proposed in this paper was proven through a comparison with the results of high-altitude simulation experiments and earlier models. Moreover, the modified model was found to be better than the earlier modified models in terms of forecasting the flashover voltage. Findings indicated that both the thermal conduction coefficient and the surface thermodynamics temperature of partial arc had a linear decrease tendency with the altitude increasing from 0 m to 3000 m, both of which dropped by approximately 30% and 3.6%, respectively. Meanwhile, the heat conduction and the heat radiation of partial arc both had a similar linear decrease of approximately 15%. The maximum error of DC pollution flashover voltage between the calculation value according to the modified model and the experimental value was within 6.6%, and the pollution flashover voltage exhibited a parabola downtrend with increasing of pollution.

Spectroscopic Determination of the Species Fractions and the Power Profiles of the Diagnostic Neutral Beam on the HT-7 Tokamak

Jia Fu,Yuejiang Shi,Yingying Li,Fudi Wang,Sheng Liu,Jian Zhang,Jun Li,Yiyyun Huang,Yuanlai Xie,Zhimin Liu,Chundong Hu,Chundong Hu,DNB Team,William Rowan,He Huang 한국물리학회 2011 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.58 No.5

A diagnostic neutral beam (DNB) has been installed on the HT-7 tokamak for the measurement of charge exchange recombination spectroscopy (CXRS). The H_α-light Doppler shift spectroscopy from the drifted duct is measured to determine the components of the neutral beam. The fractions of neutral beam species are investigated under a wide range of arc voltages and extraction high voltages of the beam aimed to the optimized species fractions for the CXRS applications. A magnet ring is used to improve the magnetic property of the ion source. The result shows that the full-energy component fractions increase from 19 to 25 percent with optimization of the beam operation, but with a dramatic increase of the water component. There are nine optical fiber channels observing one section of the beam simultaneously for this spectroscopy, which provides information of the power profiles of the beam. The full width at half maximum (FWHM) of the beam profile is 8 cm, as measured by using the spectroscopy.

Lobaplatin-TACE Combined with Radioactive ¹²⁵I Seed Implantation for Treatment of Primary Hepatocellular Carcinoma

Peng, Sheng,Yang, Qiu-Xia,Zhang, Tao,Lu, Ming-Jian,Yang, Guang,Liu, Zhen-Yin,Zhang, Rong,Zhang, Fu-Jun Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.13

Aim: To investigate the efficacy and safety of lobaplatin-transcatheter arterial chemoembolization (TACE) combined with radioactive $^{125}I$ seed implantation in treatment of primary hepatocellular carcinoma (HCC). Methods: 75 patients with primary HCC were enrolled in the study, among them 43 receiving lobaplatin-TACE (TACE group) and 32 lobaplatin-TACE combined with $^{125}I$ seed implantation (TACE+$^{125}I$ group). After treatment, the local remission rates and postoperative complications of two groups were compared using the Pearson Chi-square test. Overall survival in the two groups was calculated using Kaplan-Meier survival curves and the differences were tested using Log-rank test. Results: There were 7 cases of complete response (CR), 13 of partial response (PR), 6 of stable disease (SD) and 17 of progressive disease (PD) in the TACE group, with 13 cases of CR, 9 of PR, 5 of SD and 5 of PD in the TACE+$^{125}I$ group. The disease control rates of TACE and TACE+$^{125}I$ group were 60.5% (26/43) and 84.4% (27/32), respectively, with a significant difference between them (P < 0.05). The survival rates at 6, 12 and 18 months in the TACE group were 100.0%, 81.8% and 50.0%, respectively, and those in TACE+$^{125}I$ group were 100.0%, 93.8% and 65.6%. The mean survival times in the TACE and TACE+$^{125}I$ groups were 19.5 and 22.9 months, respectively. There was a significant difference in the overall survival rate between two groups (P < 0.05). No serious complications were encountered in either group. Conclusion: Lobaplatin-TACE combined with $^{125}I$ seed implantation is favorable and safe for treatment of primary HCC.

SYSTEM ANALYSIS OF DISASTER PREVENTION DESIGN CRITERIA FOR COASTAL AND ESTUARY CITIES

De Fu Liu,Sheng Dong,Shu Qing Wang,Chao Wang 한국해안해양공학회 1999 학술강연회 발표논문초록집 Vol.2 No.1

In China, estuary and coastal cities are mostly regional economic development center. The disasters by combined effect of upper reaches flood, storm surge and Typhoon waves are the primary obstacle to economic development of cities. So how to make economic and risk system analysis for flood-storm surge-wave disaster, economic loss and flood-storm surge control measures plays a very important role in the sustainable development of coastal cities. There are three types of coastal cities for consideration. First type city like Tianjin, the most significant damage is from upper reaches flood of a river. The effect of storm surge is negligible, because in the estuaries of river Haihe catchment basin are built tidal barrages. This paper presents a Grey Markov Model (GMM) to forecast flood peak level. GMM combines Grey system and Markov theory to present a high-precision model. Results of forecasted flood peak levels are closed to the measured data. Establish a synthetical model for economic assessment, risk analysis and flood-control benefit. As new contribution, a stochastic simulation technique is used to compute risk probability. In the same time, take into account the effect of correlation between variables on risk probability. Second type city like Shanghai, where sometimes the combined effect of flood peak of river, storm surge from sea is most severe disaster for city damage. 1000 yrs. return period water level of Huangpu river is used as traditional design criteria. Simulated combined water level of flood peak, storm surge and maximum astronomical tide level from sea side with 400 yrs. return period is close to 1000 yrs. design water level by traditional method. For third type city, like Qingdao, where combined effect of maximum astronomical tide, storm surge and waves brought most significant damage to Qingdao. Using stochastic simulation technique, different combinations of storm surge, waves with 1%,2% joint probability level are simulated for disaster prevention.

Assembly of micro/nanomaterials into complex, three-dimensional architectures by compressive buckling

Xu, Sheng,Yan, Zheng,Jang, Kyung-In,Huang, Wen,Fu, Haoran,Kim, Jeonghyun,Wei, Zijun,Flavin, Matthew,McCracken, Joselle,Wang, Renhan,Badea, Adina,Liu, Yuhao,Xiao, Dongqing,Zhou, Guoyan,Lee, Jungwoo,Chu American Association for the Advancement of Scienc 2015 Science Vol.347 No.6218

<P><B>Popping materials and devices from 2D into 3D</B></P><P>Curved, thin, flexible complex three-dimensional (3D) structures can be very hard to manufacture at small length scales. Xu <I>et al.</I> develop an ingenious design strategy for the microfabrication of complex geometric 3D mesostructures that derive from the out-of-plane buckling of an originally planar structural layout (see the Perspective by Ye and Tsukruk). Finite element analysis of the mechanics makes it possible to design the two 2D patterns, which is then attached to a previously strained substrate at a number of points. Relaxing of the substrate causes the patterned material to bend and buckle, leading to its 3D shape.</P><P><I>Science</I>, this issue p. 154; see also p. 130</P><P>Complex three-dimensional (3D) structures in biology (e.g., cytoskeletal webs, neural circuits, and vasculature networks) form naturally to provide essential functions in even the most basic forms of life. Compelling opportunities exist for analogous 3D architectures in human-made devices, but design options are constrained by existing capabilities in materials growth and assembly. We report routes to previously inaccessible classes of 3D constructs in advanced materials, including device-grade silicon. The schemes involve geometric transformation of 2D micro/nanostructures into extended 3D layouts by compressive buckling. Demonstrations include experimental and theoretical studies of more than 40 representative geometries, from single and multiple helices, toroids, and conical spirals to structures that resemble spherical baskets, cuboid cages, starbursts, flowers, scaffolds, fences, and frameworks, each with single- and/or multiple-level configurations.</P>

Influence of oxygen equivalent on molten salt oxidation efficiency of mixed resin in Li2CO3-Na2CO3-K2CO3 melt

Xin Liu,Zi-Yu Liu,Yang-Hai Zheng,Yong-De Yan,Wen-Da Xu,Yun Xue,Yue-Lin Wang,Fu-Qiu Ma,Kai Zhu,Yu-Sheng Yang 한국공업화학회 2023 Journal of Industrial and Engineering Chemistry Vol.120 No.-

The disposal of spent radioactive ion exchange resin generated during the operation of nuclear facilitieshas always been a conundrum. The molten salt oxidation (MSO) for the treatment of mixed resin (MR)shows obvious superiority. In this work, ternary carbonate (Li2CO3-Na2CO3-K2CO3) and MR was usedas the molten salt system and the oxidation target, respectively. The oxidation behavior of MR was analyzedby varying the temperature and oxygen equivalent during the MSO process. By studying the effectof different oxygen equivalents on the oxidation efficiency, the oxygen equivalent of 125% could make theoxidation efficiency of MR reach 99.99% at 800 C. The composition of C, N and S containing exhaust gasproduced through MSO process of MR with temperature were almost consistent with the simulationresults. The exhaust gas was successfully adsorbed by molten carbonate to produce nitrate and sulfurcompounds. The carbonate has good absorption to harmful gases such as SO2, CO, NO, etc. The contentof SO2 from the highest 0.32% to 0, and 71.23% of sulfur in MR was trapped by molten carbonate asthe form of sulfate. This work has important implications for reducing the potential harm of radioactivewaste resin to the environment.