http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
상이한 혼합 혐기소화액의 폭기처리에 따른 화학적 성분 변화
변지은 ( Byeon J. E. ),이홍주 ( H. J. Lee ),류종원 ( J. W. Ryoo ),황선구 ( S. G. Hwang ) 강원대학교 농업생명과학연구원(구 농업과학연구소) 2020 강원 농업생명환경연구 Vol.32 No.1
본 시험은 혐기소화액을 액비화 하였을 때 화학적 성분 변화를 비교하였다. 처리구는 돈분 혐기소화액(SS AD), 돈우분 혼합 혐기소화액(SS + CS AD), 돈분과 사과박 혼합 혐기소화액(SS + AP AD), 돈분과 감귤박 혼합 혐기소화액(SS + MP AD), 돈우분과 사과박 혼합 혐기소화액(SS + CS + AP AD), 돈우분과 감귤박 혼합 혐기소화액(SS + CS + MP AD)으로 총 6개의 처리구이다. 폭기처리는 연속폭기를 실시하였으며, 공기는 0.1 m<sup>3</sup> air/m<sup>3</sup>·min을 주입하였다. 혐기소화 처리 후 생산된 혐기소화액을 폭기처리 전과 후를 비교했을 때 용존산소(DO) 함량은 돈분과 사과박 혼합 혐기소화액(SS + AP AD)이 폭기처리 후 0.50 mg/L로 혐기소화액 중 가장 많이 증가하였다. 산화환원전위(ORP)는 모든 혐기소화액이 폭기처리 후 약 2.0-7.5 mV로 증가하였으며, 혐기소화액 중 돈분과 사과박 혼합 혐기소화액(SS + AP AD)은 7.5 mV로 가장 높은 산화환원전위를 나타내었다. 생화학적 산소요구량(BOD)와 화학적 산소요구량(COD)는 모든 혐기소화액에서 폭기처리 후 감소하였으나 BOD5/T-N와 COD<sub>Mn</sub>/T-N는 폭기처리 후 모두 증가 하였다. 혐기소화액에 관한 비료공정규격이 설정되어 있지 않아 가축분뇨발효액의 공정규격의 기준치에 적합 여부를 볼 때 질소전량과 인산전량, 칼리전량의 합이 0.3% 이상이여야 하는데 모든 혐기소화액이 폭기처리와 관계없이 0.3% 이상이었다. 혐기소화액이 비료공정규격의 기준치에 적합하지만 산화환원전위가 부숙된 액비의 평균 산화환원전위보다 매우 낮아 높여줄 필요가 있다. 혐기소화액을 폭기처리한 후 비료공정규격의 기준치에 적합할 뿐만 아니라 산화환원전위가 +값으로 증가하였으므로 폭기처리 후 액비를 시용하는 것이 바람직할 것으로 보인다. To evaluate the effects of aeration on co-digestates, we investigated the chemical contents of aerobic liquefying processes. The six co-digestates were continuously aerated with 0.1 m<sup>3</sup>air/m<sup>3</sup>·min for 54 days. The three measured chemical contents (T-N, BOD<sub>5</sub>,and COD<sub>Mn</sub>)were all decreased after aeration. Meanwhile, NO3-N, DO, and ORP were all increased after aeration. A standard procedure for fertilizers in anaerobic solutions has not yet been set in agriculture. The livestock liquid manure should have a proportion of 0.3% for T-N, T-P, and T-K. In this study, the aerobic liquid fertilizer was above the standard level(0.3%), suggesting the utilization of co-digestates.
저압 인버터용 Busbar 재질 변화에 따른 열유동-전자계 연성해석
정원목(W.M.. Jeoung),목진성(J.S. Mock),김선영(S.Y. Kim),홍찬욱(C.O. Hong),김정빈(J.B. Kim),김경서(K.S. Kim),유성열(S.R. Ryoo) 한국전산유체공학회 2012 한국전산유체공학회 학술대회논문집 Vol.2012 No.11
The Busbar is generally fabricated by molding a number of copper plates, that is used for electric system such as low voltage inverter and converter. It is conducted a study on replacing as other low-cost materials because of upsurge in raw materials for industry. In previous studies, numerical approaches were investigated to predict the effect of the temperature distribution of replacing to this busbar from copper to aluminum. In this study, thermal-fluid-electromagnetic coupled numerical analyses are performed to take into account the Joule heat effect on the numerical evaluation of the busbar material characteristics. Comparisons with experimental results show that the proposed coupled analysis provides more reliable results than the conventional analyses in predicting the temperature characteristics.
이세원(S. W. Lee),강경철(K. C. Kang),정대혁(D. H. Chung),류병욱(B. W. Ryoo),박세훈(S. H. Park),신향기(H. K. Shin),안준성(J. S. Ahn),김동현(D. H. Kim) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
스마트 제조(Smart Manufacturing) 기술은 스마트 공장 구축에 필요한 핵심적인 기술이자, 더 나아가서는 디지털 스레드(Digital Thread)를 위한 기반 기술로서의 가치가 있다. 스마트 제조 기술은 공작기계 등의 제조 장비 고도화뿐만 아니라, 제조운영기술(Operational Technology, OT) 및 정보기술(Information Technology, IT) 영역의 다양한 기술분야가 유기적으로 통합되어야만 의미 있게 적용할 수 있다. 본 논문은 공작기계를 중심으로 스마트 제조 환경 구축을 위하여 필요한 기술들을 분석하고, 기술 간의 실제적인 통합 연동을 위한 방안을 제안한다. 특히 각 기술의 학술적 수준을 분석하기 보다는, 기술 간의 연계와 실질적인 산업 적용을 위하여 필요한 요소들에 대해 제시하는 것을 주된 목적으로 하였다. 적용된 기술은 크게 5 가지로 분류하였으며, 공작기계 지능화 기술, CAD/CAM 및 소프트웨어 기술, 다양한 센서 및 수집 시스템, 네트워크와 보안 기술, 공정 분석 및 인공지능으로 구분하였다. 각 기술별로 공작기계 기술과의 관련성과 적용 방안을 분석하고, 현재 개발 진행중인 시스템을 통하여 스마트 제조 기술을 위한 기술 통합의 필요성 및 가능성을 제안한다. 시스템은 공작기계, 엣지 디바이스(Edge Device), 서버로 구성하였으며, 각각에서 운용되는 소프트웨어를 포함하고 있다.
A Gate Driver for High Voltage Thyristor Diode Switch
W.H.Kim,I.Kang,J.S.Kim,H.J.Ryoo,G.H.Rim,M.H.Cho,J.H.Nam,J.W.Kim 전력전자학회 1998 ICPE(ISPE)논문집 Vol.- No.-
Many semiconductive switches are operated in series for high voltage operation. The same number of gate drivers are needed to control all the switches, hence, the drivers cause high cost and system complexity.<br/> In this study, a simple and low cost gate driver for high voltage thyristor diode switches is investigated. This gate driver can operate several high voltage thyristor diode switches at the same time.
돈분뇨 고액분리액 시용에 따른 혼파초지의 생산성과 토양화학적 특성의 변화
김원호,신재순,이혁호,류종원,최기준,임용우,김기용,이기종 한국축산학회 1999 한국축산학회지 Vol.41 No.4
This experiment was carried out to determine the effect of the swine liquid manure separated its slurry on the dry matter yield, botanical composition and soil characteristics at pasture. The results obtained at National Livestock Research Institute(RDA), in Suwon from 1994 to 1997 are summarized as follows; The dry matter yields of swine slurry nitrogen 100%(T3), 75%(T4) and 50%(T5) were showed 94%, 91% and 75% of chemical fertilizer(T2)'s yield, respectively. and it was not significant difference between the yield of chemical fertilizer(T2) and swine liquid manure(50%)+chemical fertilizer(50%). According to application of swine liquid manure, the weed ratios of its plots were lowed by increasing its coverage and grasses. We conclude that the application of swine liquid manure(50%)+chemical fertilizer(50%) can be applied on grassland without adverse effect on dry matter production, quality of herbage, soil chemical properties.
문우식(W.S.Moon),류준욱(J.W.Ryoo),조연근(Y.G.Cho),정홍석(H.S.Chung),정범서(B.S.Cheong) 한국자동차공학회 1998 한국자동차공학회 춘 추계 학술대회 논문집 Vol.1998 No.5_1
Automotive fuel consumptions with different engine oils are determined according to the EPA FTP-75 method in this study. The results of fuel economy are discussed correlating with the properties of engine oils. To improve automotive fuel economy with engine oils, it is necessary to use VHVI base oils in formulating engine oil. The engine oils formulated with a VHVI base oil has better viscometric properties, resulting in better fuel economy. The temporary viscosity loss at 150℃ also affects automotive fuel economy.<br/>