http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
초음파 원용 레이저 가공에서 재료의 열적 물성이 표면상태에 미치는 영향에 관한 연구
이후승(Hu Seung Lee),김건우(Gun Woo Kim),박종은(Jong Eun Park),양민양(Min Yang Yang),조성학(Sung Hak Cho),박종권(Jong Kweon Park) 대한기계학회 2015 大韓機械學會論文集A Vol.39 No.8
레이저 가공 공정은 마스크 없이 전극을 가공할 수 있다는 장점 때문에 우수한 공정들 중의 하나로 제안되고 있다. 본 논문에서는, 서로 다른 열적 물성을 가지는 금속들에 레이저 가공을 수행하였다. 이 금속들은 서로 다른 표면형상, 열영향부, 그리고 재융착층을 나타내었고 이는 열전도도, 끓는점, 그리고 열확산계수에 의존하였다. 또한 재융착층을 제거하기 위하여 초음파 원용 레이저 가공을 적용, 높은 열확산계수를 가지는 재료에서 그 초음파 가진에 의한 표면 품질의 향상을 발견하였다. The laser machining process has been proposed as an advanced process for the selective fabrication of electrodes without a mask. In this study, we adapt laser machining to metals that have different thermal properties. Based on the results, the metals exhibit a different surface morphology, heat-affected zone (HAZ), and a recast layer around the machined surface according to their thermal conductivity, boiling point, and thermal diffusivity. Then, we apply ultrasonic-assisted laser machining to remove the recast layer. The ultrasonic-assisted laser machining exhibits a better surface quality in metals with higher diffusivity than those having lower diffusivity.
한약재(자하거, 백출, 차전자) 추출물의 간경화 억제효능에 관한 연구
유병수,이종형,조성은,백승화,Yu, Byung-Soo,Lee, Jong-Hyung,Cho, Syung-Eun,Baek, Seung-Hwa 대한약학회 2007 약학회지 Vol.51 No.1
Hepatic cirrhosis is an important feature of chronic liver disease. Liver cirrhosis is characterized by hyperaccumulation of fibrous tissue components and is commonly observed in latter or terminal states of chronic hepatic disease. The antifibrotic effects on liver cirrhosis by oriental herbs extraction material were examined in bile duct ligated rats. Oriental herbs extraction (0.99 mg/kg rat weight/day) was administrated to cirrohotic rats for 4 weeks. Liver collagen content of bile duct ligated rats was significantly increased. And liver histology showed collagen fiber deposition was increased as well as the normal architecture was lost with large zone of necrosis being observed. Herbs extraction administrated rats showed significantly decreased liver collagen content, accumulation of collagen fiber in histological analysis, and biochemical markers of hepatic diseases. Those results demonstrate the usefulness of herbs extraction materials as an antifibrotic agent for liver cirrhosis.
2006 IPCC 가이드라인 축산부문 도입에 따른 온실가스 배출량 계산 개선방안 연구
지은숙,양승학,조성백,황옥화,박규현,Ji, Eun-Sook,Yang, Seung-Hak,Cho, Sung-Back,Hwang, Ok-Hwa,Park, Kyu-Hyun 한국축산환경학회 2012 축산시설환경학회지 Vol.18 No.2
현재 우리나라 축산부문의 온실가스 배출량 계산은 1996년에 출판된 '1996년 IPCC 국가 온실가스 인벤토리 지침서 (1996 IPCC지침)'에 따라 계산하고 있으며 그 배출량 데이터는 국가 인벤토리 보고서에 사용하고 있다. 하지만 새로운 지침서, '2006년 IPCC 국가 온실가스 인벤토리 지침서 (2006 IPCC 지침)'가 2006년에 출판되었기 때문에 온실가스 배출량 계산을 위한 새로운 지침서를 적용하기 위한 준비가 필요하다. 본 연구에서는 축산에서 1996 IPCC 지침과 2006 IPCC 지침을 비교하였다. 또한 2000년부터 2008년 사이의 온실가스 배출량을 Tier 1 방법으로 계산하였다. 2006 IPCC 지침으로 계산한 온실가스 배출량은 1996 IPCC 지침을 이용할 때와 비교하여 1.27~1.33배 더 많았다. 이는 배출계수의 차이에 의한 것으로 나타났다. 국가 온실가스 인벤토리의 불확실성을 감소시키기 위해 더 많은 연구가 필요하다. Current estimation of greenhouse gas (GHG) emissions from livestock agriculture in Korea was based on Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (1996 IPCC GL) published in 1996 and emission data were published in National Inventory Report. New guideline book, 2006 IPCC Guidelines for National Greenhouse Gas Inventories (2006 IPCC GL), however, was published in 2006. Hence preparation to apply new guideline for the estimation of GHG emission would be necessary. In this study, 1996 IPCC GL and 2006 IPCC GL for livestock agriculture were compared. Estimated GHG emissions based on Tier 1 methods of 1996 IPCC GL and 2006 IPCC GL between 2000 and 2008 were also compared. Estimated GHG emissions based on 2006 IPCC GL were 1.27~1.33 times higher than those based on 1996 IPCC GL. These results were mainly caused by emission factors of each IPCC GL. More researches should be conducted to decrease uncertainties of national GHG inventories.
조성은,김재덕 大韓口腔顎顔面 放射線學會 1991 Imaging Science in Dentistry Vol.21 No.2
The purpose of this study is to improve the availabilities of radiographic technics as diagnostic method related to mandibular canal in dental clinic. For this study 12 dry mandibles were used and 12 orthopantomograms were taken for measuring the gonial angle and the angle of mandibular canal to inferior border of mandible. 12 sites located between the 1st premolar to the 3rd molar region of 3 dry mandibles were selected randomly, for measuring the vertical image magnification rates on three films; intraoral film, orthopantomogram, and computed tomogram, respectively and the thickness of cortical bone, and for observing bucco-lingually and supero-inferiorly location of the mandibular canal. The acquired results were as follows: 1. The mean of the gonial angle and the angle of mandibular canal to inferior border of mandible were 123.9°and 143.5°. And the two angles of dry mandible in alveolar crest stage were greater than in alveolar socket stage. 2. The vertical image length on intraoral film by paralleling technic was magnified by 3.07% on the average, the length on orthopantomogram by 18.49%, and the length on computed tomogram by 0.27%. 3. Observation of the bucco-lingually positional relationship of the mandibular canal was impossible by occlusal projection with the cross section technic and intoral standard projection with the Clack's rule, however, possible by computed tomogram. 4. The thickness of the cortical bone of mandible was thickest in inferior border, and thicker by 6.59% at buccal side than at lingual side.
조성은,김재덕 朝鮮大學校 口腔生物學硏究所 1991 口腔生物學硏究 Vol.15 No.-
The purpose of this study was to improve the availabilities of radiograhpic technics as diagnostic method related to mandibular canal in dental clinic. For this study 12 dry mandibles were used and 12 orthopantomograms were taken for measuring the gonial angle and the angel of mandibular canal to inferior border of mandible. 12 sites located between the 1st premolar to the 3rd molar region of 3 dry mandibles were selected randomly, for measuring the vertical image magnification rates on three films; intraoral film, orthopantomogram, and computed tomogram, respectively and the thickness of cortical bone, and for observing bucco-lingually and supero-inferiorly location of the mandibular canal. The acquired results were as follows ; 1. The means of the gonial angle and the angle of mandibular canal to inferior border of mandible were 123.9° and 143.5°. And the two angles of dry mandible in alveolar crest stage were greater than in alveolar socket stage. 2. The vertical image length on intraoral film by paralleling technic was magnified by 3.07% on the average, the length on orthopantomogram by 18.49%, and the length on computed tomogram by 0.27%. 3. Observation of the bucco-lingually positional relationship of the mandibular canal was impossible by occlusal projection with the cross section technic and intraoral standard projection with the Clack's rule, however, possible by computed tomogram. 4. The thickness of the cortical bone of mandible was thickest in inferior border, and thicker by 6.59% at buccal side than at lingual side.