http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이준행,이상복,장근조,이광용,이현구,김혁주,진계환,Lee, Jun-Haeng,Lee, Sang-Bock,Chang, Kun-Jo,Lee, Kwang-Yong,Lee, Hyun-Koo,Kim, Hyeog-Ju,Jin, Gye-Hwan 한국의학물리학회 2009 의학물리 Vol.20 No.4
방사선관계종사자에 대한 개인피폭선량 측정의 정확성 및 신뢰성을 확보함으로써 방사선관계종사자의 건강을 보호하고 국민보건 수준향상에 기여하기 위한 개인피폭선량 측정기관의 선량측정 품질관리 기준을 국제기준에 적합하도록 개발할 필요성이 제기되고 있다. 국내 의료기관에서의 개인선량 관련법은 ANSI N13.11-1993 규정을 참조하고 있으나 미국을 비롯한 해외 여러 나라에서는 시험 범주를 줄이고 기준을 강화한 ANSI N13.11-2001을 이미 반영하여 개인피폭선량을 측정하고 있다. 제안하는 방법은 ANSI N13.11-2001을 참고하여 기준을 단순화하였고 유리선량계와 광자극선량계 같은 현재 법률에서 인정하지 않는 첨단기술을 이용하는 것을 막거나 방해할 수 있는 조치를 취하지 않으려고 하였다. 본 논문에서 제안하는 측정기관 품질관리기준은 개인피폭선량 성능시험기준은 관련법규개정에 참고할 수 있고, 측정기관 지도 감독에 활용할 수 있다. We have developed standards based on international criterions for the quality control of dose tested by the measurement institutions of individual exposure doses through improving the reliability of data on the exposure dose of individuals working in radioactive environment and securing the accuracy and reliability of individual dose measurements. Laws related to radiation dose applied to domestic institutions refer to ANSI N13.11.1993, but currently, in U.S. and some other countries the measurement of radiation doses is based on ANSI N13.11.2001 that reduced test categories and tightened the standards. We made efforts to simplify the standards and to reduce the number of dosimeters required in experiment, and avoided preventing or hindering the use of future technologies not approved under the current law such as glass dosimeter and optical stimulation dosimeter. The Quality Management Manual of Radiation Dosimetry Service, Assessment Manual of Radiation Dosimetry Service Accreditation Program, and the Personnel Dosimetry Performance. Criteria for Testing are documents applicable in supervising laboratories.
이준,Lee, Jun 한국군사과학기술학회 2008 한국군사과학기술학회지 Vol.11 No.3
In this paper we suggest a protocol and an algorithm which connect a secure channel between a server and a client over a TCP layer. To make key exchange time the most quickly, the protocol adopts ECC Diffie Hellman(ECCDH) algorithm. And the protocol does not use Hello message for key exchanges and state changes. We also implement this protocol over an open TCP/IP program and check the secure channel connecting time over the military computer network. The suggested protocol could be practically used on the military computer network without a hardware implementation.
나노사이즈 무기분말이 폴리우레탄복합체의 중합 및 열분해반응에 미치는 영향
이준만(Lee, Joon-Man),안원술(Ahn, Won-Sool) 한국산학기술학회 2010 한국산학기술학회논문지 Vol.11 No.3
상온경화 주형용으로 사용되는 상업적 폴리우레탄 수지에 평균 입자크기가 μm 및 nm 크기의 서로 다른 무기물 파우더를 충전하여 만든 폴리우레탄 복합수지의 중합반응 및 분해반응 특성을 살펴보고 기계적물성의 변화를 연구하였다. 중합반응의 경우, 평균입자크기가 약 0.5μm로서 상대적으로 입경이 큰 Ce500 무기분말을 사용한 충전 하는 경우에는 충전량이 많아질수록 최고 반응 속도점의 반응온도는 상대적으로 낮아지는 것으로 나타나는 반면, 나 노두께크기의 MMT 충전제를 사용하는 경우에는 충전 함량에는 큰 차이가 없이 최고반응온도가 높아지면서 반응속 도도 빨라지는 거동을 보였다. 또한 TGA 열중량 시험결과에 대하여 Kissinger method를 이용하여 분석한 결과로서 Ce500-복합체의 경우에는 분해반응의 활성화 에너지가 139.34 kJ/mol이었고 MMT-복합체의 경우에는 91.12 kJ/mol로 나타났으며 이로부터 MMT 분말의 분해촉매 효과를 확인할 수 있었다. 한편, 인장강도는 5phr 정도의 소량 충전함량 에서는 별 변화를 보이지 않으나 그 이상의 함량에서는 MMT가 충전된 샘플의 강도 증가 현상이 뚜렷이 나타났다. Effects of inorganic nano-powders on the polymerization and thermal degradation kinetics as well as the mechanical properties of polyurethane nano-composites were studied by both the measurement of polymerization temperature as a function of time and non-isothermal thermogravimetric analysis (TGA) as well as the Instron test. As the results from polymerization studies, the reaction rates of MMT-filled PU composites were faster than those of Ce500-filled ones, and moreover, the activation energies using Kissinger method for the thermal degradation of composites were calculated as 139.34 kJ/mol for the Ce500-filled PU composites and 91.12 kJ/mol for MMT-filled one, respectivel, exhibiting that MMT nano-powder seemed to be acting as the catalyst for both polymerization and degradation of PU composites. UTM result, however, showed that tensile strength at break of MMT-filled composites was much higher than that of Ce500-filled ones above the concentrations range of 5 phr in the composites.
이준옥 ( Jun Ok Lee ),장남경 ( Nam Kyung Jang ) 한국기초조형학회 2014 기초조형학연구 Vol.15 No.5
본 연구의 목적은 윤리적 패션과 관련된 여러 종류의 인증제도들을 분석하고, 그 특징을 규명하는 것이다. 이를 통해 학문적으로는 윤리적 패션 인증제 구축을 위한 기초자료를 제공하고, 패션기업에게는 윤리적 패션을 실천하고 평가할 수 있는 기준을 제안하고, 소비자에게는 윤리적 기업과 브랜드, 제품에 대한 신뢰를 구축하는데 도움이 되고자 한다. 관련문헌, 정기간행물, 인터넷 등을 통해 윤리적 패션과 관련된 인증사례를 종합하여 인증의 주체와 회원, 기준, 심사 및 실행절차를 중점적으로 분석하였다. 연구의 결과는 다음과 같다. 각 인증들은 친환경 소재 사용, 폐기물 감소, 에너지 관리, 유해 화학물질 관리, 건강한 노동환경, 윤리적 생산, 사회적 책임, 윤리적 소비 지원을 포함하고 있으며 이러한 이슈들은 크게 환경, 사람, 협력이라는 세 가지 틀로 분류되었다. 또한 섬유, 직물 및 의류 생산, 유통, 사용, 폐기에 이르는 패션 파이프라인의 모든 단계에 인증제가 관여하고 있었다. 이러한 결과들을 기초로 우리나라 현실에 맞는 구체적이고 체계적인 윤리적 패션 인증제도가 구축되어야 할 것이며, 이를 위해서는 윤리적 패션을 실천하는 기업 담당자와 소비자를 대상으로 한 심층 면접과 케이스 스터디 등을 포함한 실증연구가 계속되어야 할 것이다. The purposes of this study were (a) to examine various accreditation systems regarding ethical fashion, (b) to determine the characteristics of ethical fashion accreditation system. This study was also intended to provide theoretical background of ethical fashion accreditation system to academic field, promote practice and evaluation method for ethical fashion to fashion industry, and help to increase consumers` trust toward ethical fashion industry, brand, and product. Accreditation systems regarding ethical fashion were gathered through literature, trade publications, and internet, and then analyzed on main agent, membership, standards, examination, and process. Findings were as follows. This study identified three frameworks for ethical fashion accreditation system; environment, people and cooperation that include the use of environment-friendly material, waste reduction, energy usage management, harmful chemical control, healthy working condition, ethical production, social responsibility, and support for ethical consumption. All of these were interconnected within fashion pipeline which is from fiber, textile and apparel production, retail, use, through discharge. Based on this study, the accurate and concrete ethical fashion accreditation system which is suitable to Korean fashion environment should be established. For this, future studies will be continued conducting positive research, including case-study and in-depth interview with staffs in ethical fashion companies as well as consumers.
임베디드 시스템을 위한 탄소나노튜브 오실레이터의 특성 해석
이준하(Lee Jun-Ha) 한국산학기술학회 2008 한국산학기술학회논문지 Vol.9 No.5
본 논문은 탄소 나노 튜브 (CNT)로 형성된 다중벽 탄소 나노튜브의 진통 특성을 분자 역학적 시뮬레이션 방법에 의해 해석하였다. 이로부터 이중벽 탄소 나노튜브에 비하여 다중벽 탄소 나노튜브의 경우 진동 주파수 분할이 발생됨을 분석하였다. 또한 세개의 주파수 발생자로써의 4차 벽, 5차 벽, 6차 함수 벽으로 된 오실레이터와 직경으로 부터 독립죄인 적합성 제안을 위해 지속적인 세개의 정점이 나타나는 것으로 분석되었다. The coupled oscillation of multi-walled carbon-nanotube (MWCNT) oscillators consisting of (5n,5n) CNTs was investigated by molecular dynamics simulations. The results show that the inter-wall coupling leads to frequency splits. And there are consistently three primary frequency peaks for the quadric-walled, penta-walled and hexa-walled CNT oscillators. It is independent of the wall parameters, suggesting applications as triple-frequency generators. Furthermore, at least one of the primary frequencies of a MWCNT oscillator is lower than that of its double-walled counterpart.