http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
프리캐스트 모듈간 연결부 방수성능 검증을 위한 실험적 분석
이종순(J.S. Lee),이준경(J.K. Lee),김희성(H.S. Kim),노형민(H.M. Roh),이성형(S.H. Lee),신정열(J.R. Shin) 한국철도학회 2016 한국철도학회 학술발표대회논문집 Vol.2016 No.10
도심지 심도가 얕은 지하 박스구조물은 가시설과 복공 설치 후 지반으로 시공하는 방법이 일반적이다. 이 방법은 복공설치 공정과 긴 공사기간 등의 단점이 있으므로 개착식 프리캐스트 모듈구조를 활용한 지하박스구조물을 Top-down 방식으로 시공하여 공기단축 및 도심지 구조물 상부 복토를 조기 수행하여 도로 차량의 영향을 최소화하기 위한 연구를 진행 중에 있다. 개착식 프리캐스트 모듈구조는 벽체 패널간 연결부, 벽체와 상부슬래브간 연결부의 방수성능이 가장 중요하므로 요소실험을 통한 지하구조물의 가압조건을 반영한 방수실험을 수행하였다. 방수실험은 지수재 종류와 배치를 고려하여 검토하였으며, 실험 결과 복합지수판과 수팽창지수재만 적용하여도 방수효과가 있음을 확인하였다. The excavating ground with installation of temporary structures and lining is general construction method for installation of a near-surface underground box-structure in the downtown road. As this general method has shortcomings such as lining installation process and long construction period, the research for rapid construction by constructing an underground box-structure applied with precast module structure with Top-down method is in progress. The water-proof verification experiment was performed using an element small size of 6 types and full-scale large size of 1 type considered arrangement and installation for water stop and water swelling rubber and its composite combination. As the result, it is verified that composite water-stop and only water swelling rubber have good performance for leakage.
질소시비수준이 수수 - 수단그라스 잡종과 다른 사료작물의 재생과 저장탄수화물함량 및 건물수량에 미치는 영향
이종경(J . K . Lee),서성(S . Seo) 한국축산학회 1988 한국축산학회지 Vol.30 No.7
This field experiment was carried out to determine the effects of nitrogen (N) fertilization on the dry matter yield, crude protein yield, carbohydrate reserves in stubble, dead stubble after cutting, tillering and branching of sorghum-sudangrass hybrid (Sorghum bicolor (L.) Moench), pearl millet (Pennisetum typhoides (Burm.) Stapf & C.E. Hubb.) and teosinte (Euchlaena mexicana Schrab.). The main plot was three summer forage crops, and the subplot was three N levels (0, 200 and 400㎏/㏊). The experiment was performed at College of Agriculture, SNU, Suweon in 1984. The results obtained are summarized as follows: 1. Dry matter yield was significantly (P$lt;0.05) increased with increasing N level, regardless of forage crops. Among three species, the yield of sorghum-sudangrass hybrid was the highest. 2. The percentage of crude protein was increased with increasing level of N. Pearl millet showed the highest percentage of crude protein at the second cutting, and the sorghum-sudangrass hybrid produced the highest total protein yield. 3. The content of carbohydrate reserves in stubble was decreased rapidly after the second cutting, and it was recovered to original state after two weeks. And the carbohydrate reserves was tended to be decreased with higher N level, but it was affected little by forage crops. 4. The number of dead stubble after cutting was significantly (P$lt;0.05) increased with increasing N level. Dead stubble after the second cutting was observed more than that of the first cutting. The number of tiller and branch after cutting were tended to be increased with increasing level of N. 5. In conclusion, this experiment suggested that the more yield of three forage crops could be obtained favorably with 200 ㎏ N/㏊, and the sorghum-sudangrass hybrid produced the highest yield during summer season.
친환경종합시범단지를 통한 친환경농업 발전방향에 관한 연구 -양구군,철원군,화천군 친환경종합시범단지를 중심으로-
이종인 ( J. I. Lee ),정윤필 ( Y. P. Jung ),김희걸 ( X. J. Jin ) 강원대학교 농업생명과학연구원(구 농업과학연구소) 2011 강원 농업생명환경연구 Vol.23 No.2
The Environment Friendly Agricultural Regions Service, which is regarded as friendly with the environment, is the improvement for suburbs areas in order to supply as well as produce the safe production by specialization in the management areas, which is managed by Rural Development Administration. This research creates the survey question for farmer, who was attended in to the complex. The survey question brings about the fact that the managers can catch the growth and change status after finishing project, the difficult situations, the result of the project, the requirement of the policies when these policies are applied in the research. Besides, the research considers the satisfaction between the project participating farmers and representative people for the project so as to supply the necessary data in the research result of The Environment Friendly Agriculture Regions Service. Moreover, this leads to the measure and the plan for this project.
프리캐스트 모듈 박스구조 연결부 성능검증 실물 재하실험 분석
이종순(J.S. Lee),이준경(J.K. Lee),이성형(S.H. Lee),노형민(H.M. Roh),김희성(H.S. Kim),신정열(J.R. Shin) 한국철도학회 2016 한국철도학회 학술발표대회논문집 Vol.2016 No.5
도심지 도로에서 지하 심도가 깊지 않은 지하 박스구조물을 설치하기 위해서는 가시설과 복공을 설치 후 지반을 굴착하는 방법이 일반적이다. 이 방법은 복공설치 공정과 긴 공사기간 등의 단점이 있으므로 개착식 프리캐스트 모듈구조를 활용한 지하박스구조물을 Top-down 방식으로 시공함으로써 공기단축 및 도심지 도로 복토를 신속히 수행하여 도로 차량의 영향을 최소화하기 위한 연구를 진행 중에 있다. 개착식 프리캐스트 모듈구조 중 벽체 패널간 연결부, 벽체와 상부슬래브와 연결부에 대하여 실물재하실험을 통하여 성능검증 실험을 수행하였다. 실험결과 벽체간 연결부에서는 균열이 발생하지 않음을 확인하였고, 벽체와 상부슬래브 연결부에서는 소요성능 이상의 하중저항이 가능함을 확인하였다. The excavating ground with installation of temporary structures and lining is general construction method for installation of an near-surface underground box-structure in the downtown road. As this general method has shortcomings such as lining installation process and long construction period, the research for rapid construction by constructing an underground box-structure applied with precast module structure with Top-down method is in progress. The performance verification experiment was performed using a full-scale loading test for the connection between wall and upper slab and between wall panels of precast module structure. As the result, it is verified that it was not occurred the crack of connection between walls and that it could resist against the load over the performance requirement in the connection between wall and upper slab.
방사성핵종 화학분리 자동화를 위한 인라인 칼럼 유동 보상 제어
이종광(J. K. Lee),박병석(B. S. Park),안홍주(H. J. Ahn),김태형(T. H. Kim),강한별(H. B. Kang) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
핵종분석은 방사성폐기물의 처분을 위해 필수적인 핵심 기술로서, 시료 전처리, 핵종분리, 계측 등의 일련을 과정을 포함한다. 현재 방사능 준위가 낮은 환경시료를 대상으로 이온교환수지법 또는 추출 크로마토그래피법 등의 칼럼 분리 공정을 자동화하는 시스템들이 개발된 바 있다. 하지만, 보다 준위가 높은 핵종분석에는 여전히 중력 분리방식을 사용하는 수동식 공정에 의존하고 있으므로, 보다 효율성 높고 경제성 있는 화학분리공정 및 장치 개발이 필요하다. 칼럼 분리 공정에서 유체 이송을 자동화하기 위해 튜빙 펌프가 널리 사용되고 있다. 튜빙 펌프는 튜브 내부에만 액체가 통과하므로 펌프 구성품들이 방사성 시료 또는 부식성 산 용액과 전혀 접촉하지 않으며, 비교적 세정이 용이한 장점이 있다. 또한 모터의 회전속도를 제어하여 유량을 조절할 수 있으므로 시스템 구현이 간단한 장점이 있다. 하지만 튜빙 펌프는 튜브의 노후화, 강산에 의한 변형, 탄성력 변화 등이 생기는 경우 롤러의 회전 속도를 정밀하게 제어하더라도 유속이 달라지게 된다. 본 연구에서는 실제 유속을 측정하고 이를 설정 유속과의 오차를 감소시킬 수 있는 새로운 구동 파라미터를 산출하는데 활용함으로써 설정 유속을 유지하며 유체를 이송시킬 수 있는 인라인 칼럼 유동 보상 제어 알고리듬을 제안하였다. 또한 검증 모듈의 제작, 제어 회로 설계, 오픈 소스를 활용한 제어 알고리듬을 구성하고 예비 성능시험을 수행하여 제안된 개념의 유효성을 평가하였다. 이러한 연구 결과는 현재 수행중인 이동형 원전 해체 방사성폐기물 핵종분석 설비 개발 연구에 접목하고, 추가적인 성능 검증 및 최적화를 거쳐 상용화할 예정이다.