RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        전단변형에 따른 쏘일네일의 전이길이

        유민,이상덕,You, Min Ku,Lee, Sang Duk 한국지반공학회 2018 한국지반공학회논문집 Vol.34 No.6

        쏘일네일 보강지반에 전단변형이 발생하면 쏘일네일 주변지반에는 수동토압이 유발되고, 전단변형의 증가는 주변지반의 토압 변화와 쏘일네일의 변형 및 부재력 변화를 야기한다. 본 연구에서는 대형 직접전단시험기를 이용하여 쏘일네일의 수직방향으로 전단변형을 유발하면서 쏘일네일의 전단거동을 실험적으로 분석하였으며, 수치해석을 통해 검증하였다. 전단면에서 이격된 쏘일네일의 정착부 길이(6D, 8D, 10D, 12D) 변화를 변수로 전단시험을 실시하였다. 연구결과, 전단변형의 지속적인 증가는 그라우트의 손상을 유발함을 확인하였으며, 정착부 길이변화에 따른 영향을 확인하였다. 모형시험과 수치해석을 통해 분석된 쏘일네일의 전이길이는 0.2~0.22m로 기존 연구에서 제시한 0.1m보다 크게 증가하였으며, 전단영역은 전단면에서 0.6m까지의 범위로 확인되었다. When the shear deformation occurs on the slope reinforced with soil nail, a passive earth pressure is induced on the ground around the soil nail and the increase of shear deformation causes the earth pressure variation of the ground and the deformation and member force change of the soil nail. In this study, the shear behavior of the soil nail was analyzed experimentally by inducing the shear deformation in the vertical direction of the soil nail using a large-scale direct shear test equipment and it was verified through numerical analysis. The shear test was performed on the bonded length (6D, 8D, 10D and 12D) of the soil nail separated from the shear surface. As a result, it was observed that the continuous increase of the shear deformation caused the damage of the grout and the effect according to the bonded length was analyzed. Through the model test and the numerical analysis, it was confirmed that the transfer length of the soil nail was 0.2~0.22m, which is larger than 0.1m suggested in the previous study, and the shear zone was in the range of 0.6m from the shear surface.

      • KCI등재

        지반의 전단변형에 따른 마찰형 앵커의 긴장력 변화에 대한 연구

        유민,권오일,이상덕,You, Min-Ku,Kwon, O-Il,Lee, Sang-Duk 한국지반공학회 2018 한국지반공학회논문집 Vol.34 No.4

        앵커가 보강된 비탈면에 활동이 발생한 경우에는 활동면을 따라 전단면에 전단응력과 휨 응력이 작용하게 되고, 전단변형의 증가는 앵커의 긴장력 변화를 야기한다. 본 연구에서는 전단에 따른 앵커의 긴장력 변화를 확인하기 위해 앵커의 수직방향으로 전단변형을 유발하여 앵커의 긴장력을 측정하는 방법으로 대형 직접전단시험기를 통해 전단시험을 수행하였다. 전단시험은 앵커 설치 유무, 정착부에서 전단면까지의 이격거리(1D, 2D, 4D) 및 측압(0.1MPa, 0.2MPa)을 변수로 총 8가지 조건에 대해 시험을 실시하였다. 전단시험 결과, 이격거리와 주변지반의 측압은 앵커가 설치된 모형 지반의 전단력 및 앵커의 긴장력에 영향을 미치는 것으로 나타났으며, 전단력 변화는 앵커 두부 및 선단부의 축력변화와 관련이 있음을 규명하였다. 따라서 앵커 두부에서의 긴장력 변화 경향을 분석함으로써, 간접적으로 앵커 정착부에서의 전단변형에 따른 거동을 예측할 수 있음을 확인하였다. When deformation occurs on slope reinforced with anchor, shear stress and bending stress are applied on the shear surface along the slip surface and increase of the shear deformation causes the tension force variation of the anchor. In this study, shear test was performed by measuring the tension force of the anchor by inducing shear deformation in vertical direction of the anchor using a large-scale direct shear test equipment in order to confirm the tension force variation of the anchor induced by shear deformation. The shear test was performed for 8 conditions which were classified according to the anchor reinforcement, separation distance (1D, 2D, 4D) from the shear surface to bonded part and the lateral-pressure condition (0.1 MPa, 0.2 MPa) of adjacent ground. As a result of the shear test, it was found that the separation distance and the lateral-pressure condition affect the shear force of the ground reinforced by anchor and the tension force of the anchor, and experimentally verified that the shear force variation is related to axial force variation of the anchor head and tip. Therefore, it was confirmed that the behavior of the bonded part induced by the shear deformation can be indirectly predicted by analyzing the tendency of the tension force variation of the anchor head.

      • KCI등재

        돌기형 저항체를 설치한 앵커의 인발저항거동

        유민,이상덕,You, Min-Ku,Lee, Sang-Duk 한국지반공학회 2017 한국지반공학회논문집 Vol.33 No.11

        본 연구에서는 정착부 표면에 저항체를 설치한 앵커의 인발거동특성을 모형시험을 통해 규명하였다. 모형시험은 원형의 토조 중앙에 앵커체를 설치한 후 앵커를 등속으로 인발하면서 인발저항력을 측정하였다. 본 연구에서는 앵커형식(저항체 설치 유무), 앵커체 표면의 마찰조건($1/3{\phi}$, $2/3{\phi}$, ${\phi}$)과 돌기형 저항체 개수(1set, 2set, 4set), 돌기형 저항체 높이(0.05d, 0.10d, 0.20d) 등 총 10가지의 조건에 대하여 인발시험을 실시하였다. 인발시에는 일정한 속도(1mm/min)를 유지하였으며, 최대 80mm까지 인발하여 각 조건별 인발하중 및 변위를 측정하였다. 인발시험 결과 확장형 앵커는 마찰형 앵커와 비교하여 최대 인발저항력 뿐만 아니라 잔류 인발저항력도 크게 발생하는 것으로 분석되었다. 돌기형 저항체의 설치개수 증가에 따라 최대 인발저항력이 증가하였으며, 잔류 저항력 비율은 171~591%로 마찰형 앵커에 비해 현저하게 증가하였다. In this study, the pull-out resistance behavior of the anchor with the bump type resistors at the anchor body was experimentally investigated. In the model tests, the pull-out resistance was measured by pulling out the anchor at a constant speed. Anchor body was installed in the center of the circular sand tank. Pull-out tests were conducted for 10 conditions. The anchor type (existence of the resistor), the friction conditions of the anchor body surface ($1/3{\phi}$, $2/3{\phi}$, ${\phi}$), the bump type resistor set number (1set, 2set, 4set), and the height of resistors (0.05d, 0.10d, 0.20d) were varied. The load-displacement relationship for each conditions was measured during the pull-out tests at a constant speed (1 mm/min). Maximum pull-out length was 80 mm. As a result, the pull-out behavior of the friction type anchor and the expansion type anchor was different. As the number of resistor increased, the maximum pull-out resistance increased and the residual pull-out resistance ratio increased significantly, which were at 171~591 percent larger than that of the friction type anchor.

      • KCI등재
      • KCI등재

        균형능력 향상을 위한 재활 훈련 시스템 개발

        이승훈(Seung hoon, Lee),최영근(Young geun Choi),이원섭(Won sup Lee),유희천(Hee cheon You),유민정(Min Jung Yu),고명환(Myoung Hwan Ko),박종관(Jong Kwan Park) 한국컴퓨터게임학회 2015 한국컴퓨터게임학회논문지 Vol.28 No.2

        Since the conventional methods of physical therapy may decrease the motivation of a patient for rehabilitation due to repetitive, monotonous movement, a new physical therapy system inducing a motivation from the patient is needed. The present study is intended to develop a physical therapy serious game for enhancement of dynamic balance control. The balance control therapy game was developed by the following steps: (1) survey of existing balance control therapy systems, (2) analysis of balance control literature, (3) ideation and architecture planning of the balance control therapy game, and (4) implementation of the balance control therapy game. The proposed physical therapy serious game can provide better usability, satisfaction, clinical effectiveness for balance control than the conventional methods.

      • KCI등재
      • SCOPUSKCI등재

        어육장의 휘발성 향기 성분 특성

        윤미경(Mi Kyung Yoon),최아름(Areum Choi),조인희(In Hee Cho),유민정(Min Jung You),김지원(Ji Won Kim),조미숙(Mi Sook Cho),이종미(Jong Mee Lee),김영석(Young-Suk Kim) 한국식품과학회 2007 한국식품과학회지 Vol.39 No.4

        어유장의 휘발성 향기 성분들을 용매추출을 이용하여 분리, 농축하였으며, GC-MS로 분석하였다. 총 36가지의 휘발성 성분들이 검출되었으며, 11개의 aliphatic hydrocarbons, 4개의 acids, 2개의 ketones, 5개의 phenols, 7개의 alcohols, 1개의 pyrazines, 4개의 pyrones와 furanones, 2개의 miscellaneous components 등으로 구성되어 있었다. 특히, acids인 butanoic acid가 높은 함량을 나타내었다. 어육장의 향기활성 성분을 규명하기 위해 용매추출을 이용하여 휘발성 성분들을 분리 후 향추출물 희석분석법으로 flavor dilution(FD) factor(Log₃ FD)를 구하였다. 이 결과 어육장에서 총 20종의 향기활성 성분들이 확인되었다. 이 중 군덕내의 특성을 지닌 butanoic acid와 구운 감자향을 지닌 methional이 높은 FD factor를 보였으며, 이들 성분 외에 높은(Log₃ FD>7)를 나타내는 성분들로는 2-methyl-2-butanol(soysauce-like), 3-hydroxy-2-butanone(buttery), 2-furanmethanol(burnt sugar-like) 등이 있었다. 본 실험에서는 어육장용 시료로 하여 휘발성 향기성분 및 향기활성 성분들을 GC-MS 및 AEDA법에 의해 분석함으로 어육장 특유의 향미특성을 규명하였다. 이는 앞으로 고급화된 장류 제품으로서는 물론, 다양한 식품에서 조미소재로의 어육장의 활용도를 높이는데 기여할 것이다. The volatile components in Eoyuk-jang, a traditional Korean fermented food, were isolated using solvent extraction, and analyzed by gas chromatography-mass spectrometry (GC-MS). A total of 36 components, including 11 aliphatic hydrocarbons, 4 acids, 2 ketones, 5 phenols, 7 alcohols, 1 pyrazines, 4 pyrones and furanones, and 2 miscellaneous components, were found in Eoyuk-jang; among them, butanoic acid was quantitatively dominant. In addition, the aroma-active compounds were determined by gas chromatography-olfactometry (GC-O) using aroma extract dilution analysis (AEDA). A total of 20 aroma-active compounds were detected by GC-O. Butanoic acid (rancid) and methional (cooked potato-like) were the most potent aroma-active compounds with the highest FD factors (Log₃ FD), followed by 2-methyl-2-butanol (soysauce-like), 3-hydroxy-2-butanone (buttery), and 2-furanmethanol (burnt sugar-like).

      • KCI등재

        분변오염 기저귀에서 분리한 플라스틱과 펄프의 미생물 저감화

        유민,이호선,김경신,오한슬,주탁,강성태,Jung, You Min,Lee, Ho Sun,Kim, Kyung Shin,Oh, Han Seol,Joo, Tak,Kang, Sung Tae 한국미생물학회 2015 미생물학회지 Vol.51 No.2

        분변이 오염된 기저귀의 플라스틱과 펄프를 재활용하기 위해서 기저귀에서 분리된 플라스틱과 펄프의 세척, 기저귀의 직접 가열 살균 후 세척, 분리된 플라스틱과 펄프의 세척 후 가열 살균의 3가지 방법으로 플라스틱, 펄프 중의 대장균군과 일반세균의 저감화를 시도하였다. 기저귀를 10% $CaCl_2$과 4% 해수염 용액에 반응시킨 뒤 1,000 ml의 희석액을 투입한 후 체에 걸러 플라스틱과 펄프 시료를 분리하였다. 분리된 플라스틱, 펄프의 미생물의 저감화에는 3회 세척이 가장 적당하였으며 3회 세척 시 플라스틱과 펄프에 잔존하는 대장균군은 92.8%과 99.8%가 감소하였고 일반세균은 97.3%과 98.5%가 감소하였다. 사용된 기저귀에서 플라스틱과 펄프를 분리하지 않고 직접 기저귀를 살균한 후 플라스틱과 펄프를 분리하여 잔존 미생물수를 측정한 결과, $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$에서 12시간 동안 살균한 후 3회 세척 및 분리 과정을 거쳐 회수한 플라스틱과 펄프에서는 12시간 가열 후에도 $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$에서 각각 2-3 log CFU/g, 1-2 log CFU/g으로 일반세균이 검출되어 완전 사멸이 되지 않았다. 한편 분변 오염된 기저귀로부터 얻어진 플라스틱과 펄프를 3회 세척한 후 가열하는 경우 $80^{\circ}C$에서 4시간으로 완전 살균이 되었으며, 이 방법이 분리된 플라스틱과 펄프 중의 미생물의 저감화에 가장 적합한 방법으로 확인되었다. Three different methods (simple washing of plastic and pulp sample, washing after direct heating of the diapers, and the heating after washing of plastic and pulp sample) were carried out to decrease total coliforms and heterotrophic plate count (HPC) in the diaper's plastic and pulp. Plastic and pulp samples were obtained from diaper by treatment with 10% $CaCl_2$ and 4% sea salt water, dilution with 1,000 ml tap water, and draining by using sieves. Three times washing was the most appropriate for the reduction of microorganisms in plastic and pulp. By three times washing, the number of total coliforms in the plastic and pulp samples showed 92.8% and 99.8% of decrease, respectively, and the number of HPC showed 97.3% of decrease in the plastic and 98.5% of decrease in the pulp. The washing after direct heating of the fecal contaminated diapers was not effective because HPC in the plastic and pulp samples were still detected about 2-3 log CFU/g in the plastic and 1-2 log CFU/g in the pulp, respectively, even after heating at $60^{\circ}C$, $80^{\circ}C$, $100^{\circ}C$ for 12 h. Meanwhile, total coliforms and HPC were completely sterilized at $80^{\circ}C$ for 4 h by heating after washing of plastic and pulp samples, suggesting that this method was the most appropriate method for the reduction of microorganisms in plastic and pulp obtained from fecal contaminated diapers.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼