http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
WC-Co계 미세조직에 따른 CVD 다이아몬드 코팅막의 접착력 변화
이동범,채기웅,Lee, Dong-Beum,Chae, Ki-Woong 한국세라믹학회 2004 한국세라믹학회지 Vol.41 No.10
평균입자크기가 서로 다른 WC-Co계 모재위에 고온 열처리법과 화학적 에칭방법을 이용하여 다이아몬드 막을 코팅하고 압흔법을 통해 그 접착력(adhesion strength)을 평가하였다. $1450^{\circ}C$의 고온 열처리 방법에 의해 준비된 WC-Co 시편표면에서는 WC 입자가 성장하였으며, 그 결과 20$\mu$m 이상의 다이아몬드 막이 증착된 경우에도 100kg의 하중에서도 우수한 접착력이 얻어졌다. 그러나, 모재 표면입자의 과도한 입성장으로 시편 인선부에는 변형이 발생하였으며, 증착된 다이아몬드 막은 거친 표면조도를 보였다. 이와 비교하여, 화학적 부식의 경우에는 submicron 크기의 WC 입자를 제외하고, 2$\mu$m 이상의 WC 입자를 가지는 모재를 이용하여 10$\mu$m의 다이아몬드 코팅막을 증착시킨 경우에는, 60kg의 하중에서도 양호한 접착력이 유지되었다 특히, WC 입자가 클수록 접착력의 신뢰성이 대폭 향상되었다. 이는 수 $\mu$m 이내의 비교적 얇은 두께의 다이아몬드 막을 증착하는 경우 화학적 에칭방법이 시편 형상의 변형을 방지하고, 양호한 표면조도를 얻을 수 있어 고온 열처리 방식에 비해 효과적임을 의미한다. The effect of microstructure of WC-Co substrates which have different WC grain sizes from submicron to 5 $\mu$m on the diamond-substrate adhesion strength was investigated. The substrates were pre-treated by two methods : chemical etching with Murakami's solution and subsequently with $H_2SO_4$, and thermal heat-treatment. The adhesion strength was estimated by degree of peeling after Rockwell indentation. Diamond films of 20 $\mu$m thickness deposited on the heat-treated substrates showed an excellent adhesion strength at the load of 100 kg, which ascribed to the large and elongated WC grains. However, the cutting edge of insert was deformed after heat treatment and the surface morphology of heat treated substrate strongly affected on the surface roughness of the deposited diamond films. On the contrary, the diamond film of 10 $\mu$m in thickness on the chemically etched substrates of average WC grain size over 2 $\mu$m showed good adhesion strength enough not to peel-off under a load of 60 kg. Especially, the substrate of average WC grain size over 5 $\mu$m exhibited much improved reliability of adhesion comparing with the substrate of average grain size under 2 $\mu$m. No substrate deformation was observed in this case after the chemical etching, which is more advantageous and more practical in terms of precious machining than the heat treatment case.
이동범,하철주,김명진,김강윤,최호춘,Lee, Dong-Beom,Ha, Cheol-Ju,Kim, Myeong-Jin,Kim, Gang-Yun,Choe, Ho-Chun 대한산업보건협회 2003 산업보건 Vol.184 No.-
본 분석기법은 유해인자별 작업환경측정 및 특수건강진단 시료를 분석할 때 간편하게 활용할수 있는 방법으로 산업보건관련 유관기관에 실질적인 도움을 주고자 합니다. 이 분석기법들 중에는 공식적으로 검증, 채택되지 아니한 기법이 있음을 알립니다.
5일 보존용 채혈백에 따른 보존일자별 농축혈소판의 생화학 및 성상 분석
이동범 ( Dong Beom Lee ),유태종 ( Tae Joung Yoo ),김태전 ( Tai Jeon Kim ),김승곤 ( Seung Kon Kim ),신종관 ( Jong Kwan Shin ),양대형 ( Dae Hyung Yang ),고광임 ( Goung Yim Ko ),박성훈 ( Seung Hun Park ) 대한임상검사과학회 2002 대한임상검사과학회지(KJCLS) Vol.34 No.2
Biochemical changes and icon of platelets on platelet concentrates preserved for a 5 day term in several plastic containers were investigated. The authors evaluated the TOTM-PVC second generation container produced by Green Cross Medical Corp. and Boin medica. Blood obtained from 40 persons was manufactured for platelet concentrates within 4 hours and each divided into 20 units of platelet concentrations. Samples were taken at 0, 3, and 5 days and the platelet count, pH, p02, pC02, HC03-, glucose, LDH, lactate, electrolytes, and mineral element were tested. ’fhe number and MPV, for platelets icon, were well preserved on two different platelet concentrates during storage. A test for biochemical function appeared to be effective data. pH was maintained above 6.8 on two different platelet concentrates during storage. The results suggest that the TOTM-PVC second generation platelets storage container produced by Green Cross Medical Corp. and Boin medica was able to preserve platelets for at least five days without lesion and was it concluded to have biochemical efficacy on patients with transfusions.
기업 정보 유출 방지를 위한 MFP 보안 취약점 분석 및 보안대책
이동범 ( Dongbum Lee ),최명균 ( Myeonggyun Choi ),곽진 ( Jin Kwak ) 한국정보처리학회 2012 한국정보처리학회 학술대회논문집 Vol.19 No.1
MFP는 프린터, 복사기, 스캐너, 팩스 등의 장치가 결합되어 있는 임베디드 장치로써 출력, 복사, 스캔, 팩스 외에도 대용량의 문서 데이터를 저장하고 네트워크 통신을 이용한 원격 유지보수, 다중 전송 등의 기능을 갖고 있다. 이러한 MFP는 최근 기업 및 공공기관에서 업무의 효율성 증대와 경비절감을 위해 중요한 문서를 처리하는 장비로 널리 보급되고 있다. 하지만 내부 직원이나 공격자들에 의해 중요한 문서들이 외부로 유출되면서 기업의 피해가 증가하고 있다. 따라서 본 논문에서는 기업 내부 정보 유출을 방지하기 위해 MFP에서 발생할 수 있는 다양한 보안 취약점과 그에 따른 대책을 분석하였다.
이동범(Dongubm Lee) 한국정보보호학회 2015 정보보호학회논문지 Vol.25 No.5
다기능 주변기기는 원래 이미지 처리 작업을 중심으로 수행하는 장치였지만 팩스 기능이 결합하여 전자화된 이미지 데이터를 전송하는 기능과 네트워크 기능이 추가되어 비약적으로 발전하였다. 또한, 다기능 주변기기는 인터넷 응용, 애플리케이션 확장, 원격 공유, 이미지 처리의 기능이 추가되었다. 하지만 다기능 주변기기는 네트워크 연결로 인한 위협으로 발생하는 데이터 노출 및 도청 등의 보안 취약점이 발생할 수 있다. 따라서 다기능 주변기기에 대한 평가 기준이 필요하지만, 현재는 다기능 주변기기에 대한 공통된 보호프로파일이 존재하지 않아서 제품에 대한 안전성을 평가하는데 구체적인 평가 기준을 적용하지 않아 평가 품질의 균일성을 유지하는 것이 어려웠다. 따라서 본 논문에서는 다기능 주변기기에 대한 위협을 분석하여 안전한 다기능 주변기기를 사용하기 위해서 공통평가기준을 기반으로 다기능 주변기기에 대한 보호프로파일을 개발하였다. Multi-functional devices was originally an equipment performing image processing, but function transmitting image data digitized by combining fax function and function of network are added and it was rapidly developed. Also, functions of internet application, application expansion, remote sharing and image treatment were added to multi-functional devices. But, multi-functional devices can cause security vulnerability such as data exposure, eavesdropping, etc. because of the threatening by network connection. Therefore, common criteria of multi-functional devices are necessary, but there is no protection profile for multi-functional devices now. Therefore, concrete standards of evaluation are not applied to evaluate secure for products, so it was difficult to maintain uniformity of evaluation quality. Therefore, this paper developed protection profile for multi-functional devices based on common criteria of evaluation so as to analyze threats of multi-functional devices and use secure multi-functional devices.
MFP 환경에서의 CSRF 공격에 대한 보안 취약점 분석
이동범 ( Dongbum Lee ),곽진 ( Jin Kwak ) 한국정보처리학회 2013 한국정보처리학회 학술대회논문집 Vol.20 No.2
IT 기술의 빠른 변화에 따라 업무 효율성을 제공하기 위하여 다기능 주변기기를 널리 사용하고 있다. 하지만 MFP의 안전한 사용을 위해서 정보보안 측면에서 알려진 취약점의 영향을 받는 플랫폼의 사용으로 인한 위협, 네트워크 연결로 인한 위협 등 다양한 취약점이 발생하고 있다. 따라서 본 논문에는 MFP에서 발생 가능한 CSRF 공격을 분석하고, 이에 대한 대응 방안을 모색한다.