http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
윤효섭,류근걸,Yun, Hyo-Seop,Ryu, Geun-Geol 한국재료학회 2001 한국재료학회지 Vol.11 No.4
반도체 소자의 고집적화에 따른 세정공정 수는 점점 증가하고 있는 추세에 있다 현재 사용되는 세정은 다량의 화학약품 및 초순수를 소비하며, 고온에서 행하여지고 있는 RCA세정을 근간으로 하고 있다. 세정공정수의 증가는 바로 화학약품의 사용량 증가를 초래하게 되며, 이에 따른 환경문제가 심각하게 대두되고 있는 실정에 이르렀다. 따라서 이러한 화학약품 및 초순수 사용을 절감하고, 저온에서 세정공정이 이뤄지는 기술이 향후 요구되어 지고 있다. 이번 연구는 이러한 관점에서 화학약품 및 초순수 사용량을 줄이며, 상온 공정이 이뤄지는 전리수를 이용하여 실리콘 웨이퍼 세정을 하였다. 제조된 전리수는 산화성 성질을 지닌 양극수와 환원성 성질인 음극수로 이루어지고, 각각 pH 및 ORP는 4.7/+1050mV, 9.8/-750mV를 30분 이상 유지하고 있었다 전리수의 양극수에 의한 금속제거 효과가 음극수의 효과보다 우수함을 확인할 수 있었으며, 다양한 입자제거 실험에도 불구하고, 동일한 분포도를 나타내고 있었다. A present semiconductor cleaning technology is based upon RCA cleaning, high temperature process which consumes vast chemicals and ultra Pure water(UPW). This technology gives rise to the many environmental issues, therefore some alternatives have been studied. In this study, intentionally contaminated Si wafers were cleaned using the electrolyzed water(EW). The EW was generated by an electrolysis equipment which was composed of anode. cathode, and toddle chambers. Oxidative water and reductive water were obtained in anode and cathode chambers, respectively. In case $NH_4$Cl electrolyte, the oxidation-reduction potential(ORP) and pH for anode water(AW) and cathode water(CW) were measured to be +1050mV and 4.7, and -750mV and 9.8, respectively. For cleaning metallic impurities, AW was confirmed to be more effective than that of CW, and the particle distribution after various particle removal processes was shown to be same distribution.
윤효섭,김종민,맹철수,김기석,김현민 한국전산구조공학회 2016 한국전산구조공학회논문집 Vol.29 No.3
상부 탑재형 노내계측기(TM-ICI) 개발은 원자로하부헤드 대신 원자로상부헤드로 계측기를 삽입함으로써 중대사고 위험을 줄이기 위해 진행 중이다. 이 개발 과제의 일환으로, NUREG/CR-6909와 Code Case N-761의 두 방법에 따라 TM-ICI 노즐에 대한 환경피로평가가 수행되었다. TM-ICI 노즐은 level A, level B 및 시험 조건에서의 과도조건에 따른 하중을 받는데 이에 대해 피로평가를 해야 한다. 원자로냉각재환경이 고려된 TM-ICI 노즐의 누적사용계수는 1이하로 평가되었고, 이는 ASME Code 허용기준을 만족한다. The development of Top-Mounted In-Core Instrumentation(TM-ICI) is an ongoing project to reduce the risk due to severe accidents by inserting the instrumentation into a reactor closure head instead of a reactor bottom head. As part of this project, environmental fatigue analyses for TM-ICI nozzle have been performed using two methods of NUREG/CR-6909 and Code Case N-761. TM-ICI nozzle is subjected to transient loads for level A, level B and test conditions that should be evaluated for a fatigue analysis. It is found that a cumulative usage factor considering reactor coolant environment for TM-ICI nozzle is evaluated as less than 1, which is ASME Code allowable criteria of a fatigue analysis.
내부압력, 열하중 및 외부하중을 고려한 노즐의 2차원 및 3차원 해석 비교
윤효섭,김종민,맹철수,김현민,이대희,Yoon, Hyo-Sub,Kim, Jong-Min,Maeng, Cheol-Soo,Kim, Hyun-Min,Lee, Dae-Hee 한국전산구조공학회 2015 한국전산구조공학회논문집 Vol.28 No.3
본 논문에서는 원통형 쉘에 부착된 노즐의 구조 건전성평가를 수행하고 그 결과를 비교하기 위해 2차원(2D)과 3차원(3D) 해석이 수행되었다. 현재 원자력 발전소에서 사용되는 3개의 노즐을 구조 건전성평가를 위해 선정하였고, 각각 노즐은 내부압력, 온도변화 및 외부하중을 받는다. 내부압력에 대한 2D 해석은 1.5이상의 계수 값을 이용하거나 응력집중 계수를 적용하여야 하고, 온도변화에 대한 2D와 3D 해석결과는 피복재의 유무와 상관없이 서로 거의 비슷하며, 외부하중에 대한 WRC Bulletin 297에 의한 해석결과는 3D 해석결과보다 더 보수적임을 확인할 수 있었다. In this paper, the two-dimensional(2D) and three-dimensional(3D) analyses have been performed in order to evaluate the structural integrities and compare 2D and 3D results for nozzles attached to cylindrical shells. Three nozzles, which are currently used in the nuclear power plant, are chosen to evaluate the structural integrities, and each nozzle is subjected to internal pressure, temperature variation and external loads. It is found that the 2D analysis for internal pressure should be performed with a factor of more than 1.5 or a stress concentration factor; 2D and 3D analysis results for temperature variation are almost similar to each other regardless of cladding; and the analysis results for external loads by WRC Bulletin 297 are more conservative than the 3D analysis results.