http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
여동훈,유기원,이강욱,한승헌,Yeo, Dong Hoon,Yu, Giwon,Lee, Kang-Wook,Han, Seung-Heon 대한토목학회 2015 대한토목학회논문집 Vol.35 No.2
민간투자사업에 대한 부정적인 시각으로 인해 민간투자사업 시장은 축소되었으나, 최근 국내 재정사업의 축소로 인해 민간투자사업에 대한 필요성이 다시금 제기되고 있다. 민간투자사업은 건설사, special purpose company (SPC), 재무투자자 등 다양한 참여자들 간의 이해관계가 복잡하여 사업의 성과를 판단하기 위해서는 참여자 간 관점 차이에 대한 고려가 필요하나, 기존의 연구는 재무적 관점의 수익성 예측, 또는 리스크 식별을 통한 수익성 예측을 중심으로 수행되었다. 이러한 점을 고려하여 본 연구에서는 민간투자사업 주요 참여자별 특성에 따른 민간투자사업 성과예측 모델을 개발하였다. 이를 위해 첫째, 다양한 분야의 문헌고찰을 통해 민간투자사업의 조직구조를 분석하였으며, 건설사, SPC, 재무투자자의 관점에서 민간투자사업 수익성 영향요인을 도출하였다. 둘째, 도출된 수익성 영향인자들을 바탕으로 민간투자사업 관련 전문가 설문조사 및 인터뷰를 실시하였다. 셋째, 구조방정식 모델(structural equation model)을 통해 민간투자사업의 구성개념들 간에 직접효과와 간접효과를 분석하여 민간투자사업의 수익성 및 수익안정성 측면에서의 성과를 거시적으로 이해할 수 있는 모델을 개발하였다. 넷째, 모델을 통해 도출된 결과를 바탕으로 민간투자사업의 재도약을 위한 발전방안을 제시하였다. 향후 본 모델을 통해 수익성과 수익안정성 측면에서 건설사, 재무투자자, SPC 운영사의 사업성과 예측이 가능하며, 이에 따른 대응전략을 모색하는데 활용 가능할 것으로 기대된다. The market of public-private partnership (PPP) projects has reduced from 9.4 trillion won in 2007 to 4.5 trillion won in 2012. However, the need of PPP projects is brought up by a massive down scale of government financial business. Previous studies regarding PPP projects mostly evaluate profitability from the financial perspective or analyze risk factors as a whole. Although PPP projects generally have complex structure involving diverse stakeholders, such as contractor, financial investor, and special purpose company (SPC) operators, existing studies have rarely considered the different viewpoints of PPP project stakeholders. Therefore, purpose of this study is to develop a structural equation model (SEM) considering the diverse stakeholders of PPP projects. To this end, the authors first reviewed the organizational structure of PPP projects. Next, the identification of the factors affecting project profitability are done via comprehensive literature reviews. After that, we conducted in-depth interviews and questionnaire surveys to reflect stakeholders' perspectives (contractors, financial investors, and SPC operators). As a result, a SEM model is developed to analyze direct and indirect effect on the PPP project performances. Finally, using the analysis results, relevant implications and directions for improvements are discussed. The prediction of the business performance of contractor, financial investor, and SPC operator is expect to be possible through the model developed and supports the strategy deduction that is appropriate for the participants.
바인더 함량 변화가 LTCC 그린 테이프의 물리적 특성에 미치는 영향
유정훈,여동훈,이주성,신효순,윤호규,김종희,You, Jung-Hoon,Yeo, Dong-Hun,Lee, Joo-Sung,Shin, Hyo-Soon,Yoon, Ho-Gyu,Kim, Jong-Hee 한국전기전자재료학회 2006 전기전자재료학회논문지 Vol.19 No.12
The properties of LTCC green tape with addition of binder were investigated in order to understand an effects of binder on multilayer processing. A green sheet form was fabricated through tape casting method with the MLS-22 powder. The lamination density increased with increasing amount of binder and lamination pressure. With increasing amount of binder, the elongation of ceramic sheets increased but the tensile stress and air-permeability decreased. The addition of excessive binder is caused defects in the green sheet during via hole punching. The optimum condition of the via hole without defects was observed from amount of the binder 10 wt%.
BaSn(BO<sub>3</sub>)<sub>2</sub>세라믹스의 저온소결 및 유전특성
남명화,김효태,황준철,남중희,여동훈,김종희,남산,Nam, Myung-Hwa,Kim, Hyo-Tae,Hwang, June-Cheol,Nam, Joong-Hee,Yeo, Dong-Hoon,Kim, Jong-Hee,Nahm, Sahn 한국세라믹학회 2006 한국세라믹학회지 Vol.43 No.2
Dolomite type $BaSn(BO_3)_2$ ceramics with rhombohedral crystal structure has been synthesized via solid state reaction route. Dielectric properties were measured for the samples sintered at $1050\~1200^{\circ}C$ for 2 h in air. Dielectric constant, loss tangent, and temperature coefficient were increased with sintering temperature due to the evolution of $BaSnO_3$, secondary, phase. Optimum dielectric properties were obtained at the $BaSn(BO_3)_2$ ceramics sintered at $1100^{\circ}C.\;CuO/Bi_2O_3$ was added to $BaSn(BO_3)_2$ ceramics to lower the sintering temperature for LTCC application, then Co and Fe-based coloring agents were added for colorizing the LTCC tape. Typical dielectric properties of $BaSn(BO_3)_2$ ceramics with $5 wt\%\;CuO/Bi_2O_3\;and\;3wt\%$ Co-coloring agent that sintered at $900^{\circ}C$ were $\varepsilon_r=9.89,\;tan{\delta}=0.92\times10^{-3},\;and\;TCC=112ppm/^{\circ}C$. Thus obtained LTCC tape was co-fired with Ag paste for compatibility test and revealed no sign of Ag reaction with the ceramics.
2차원 기공층을 포함하는 초박형 단열기판의 미세구조 및 단열 특성
유창민,이창현,신효순,여동훈,김성훈,Yoo, Chang Min,Lee, Chang Hyun,Shin, Hyo Soon,Yeo, Dong Hun,Kim, Sung Hoon 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.11
We investigated the structure of an ultra-thin insulating board with low thermal conductivity along z-axis, which was based on the idea of void layers created during the glass infiltration process for the zero-shrinkage low-temperature co-fired ceramic (LTCC) technology. An alumina and four glass powders were chosen and prepared as green sheets by the tape casting method. After comparison of the four glass powders, bismuth glass was selected for the experiment. Since there is no notable reactivity between alumina and bismuth glass, alumina was selected as the supporting additive in glass layers. With 2.5 vol% of alumina powder, glass green sheets were prepared and stacked alternately with alumina green sheet to form the 'alumina/glass (including alumina additive)/alumina' structure. The stacked green sheets were sintered into an insulating substrate. Scanning electron microscopy revealed that the additive alumina formed supporting bridges in void layers. The depth and number of the stacking layers were varied to examine the insulating property. The lowest thermal conductivity obtained was 0.23 W/mK with a $500-{\mu}m-thick$ substrate.