絹織物의 樹脂加工에 관한 硏究 : Silicone Resin Finishing

南重熙,卓泰文 한국잠사학회 1985 한국잠사곤충학회지 Vol.27 No.2

The structural and useful characteristics of silk habutae treated with silicone resin by emulsion finishing method were studied. The results were obtained through crease recovery test, water repellency test, scanning micrograph observation, amino acid analysis, X-Ray diffraction analysis, and Fourier Transform Infrared Spectroscopy. The results are summarized as follows; 1) The improvement in crease recovery of silk habutae finished with silicone resin, was observed by soaping treatment and curing conditions. 2) The higher water repellency and stiffness in silk fabrics finished with silicone resin was found by the fabric inspection and the scanning electron microscopic observation. It is suggested that silicone resin impregnated into the void of silk fibroin. 3) The polar side chains of amino acid composition were decreased, when the silicone resin was treated on silk fibroin. 4) Through Amino acid analysis of silicone resin finished fibroin, the different amounts of amino acid composition was indicated due to silk fibroin silicone polymer reaction and the stuructural difference of its fibroin were also proved by X-ray diffractograms. 5) The functionality of the siloxane compound may be deduced from the silicone finished silk habutae by Fourier Transform Spectroscopy. It was concluded from the above results that the useful characteristics of silk fabric can be improved by silicone resin finishing.

헬리컬기어 냉간사이징 금형의 구조와 소성가공의 문제점

남중희,최원식,정숭근 한국소성가공학회 2011 한국소성가공학회 학술대회 논문집 Vol.2011 No.10

YIG 페라이트의 미세구조 및 자기특성에 미치는 분쇄공정의 영향

남중희,박상진,여동훈,김효태 한국자기학회 2006 한국자기학회 학술연구발표회 논문개요집 Vol.- No.-

견사의 탄성적성질에 관한 연구 IV. 견사 및 견층용해도와 견사의 기계적성질과의 관계

남중희 한국잠사학회 1973 한국잠사곤충학회지 Vol.15 No.2

잠품종에 따라서 차이가 견사섬도와 견층용해도가 견사의 탄성적성질에 미치는 영향에 대하여 알아보았다. 즉 21개품종의 견사에 대하여 견사섬도 (X$_1$)와 견층용해도 (X$_2$)를 측정하고, X$_1$ 및 X$_2$의 변화와 절단강도(Y$_1$), 절단신도 (Y$_2$) 및 양구율 (Y$_3$)과의 관계를 알아 본결과 다음과 같은 식을 찾았다. A. 견사섬도의 영향 $Y_1$= -0.4$\chi$$_1$+5.03 $Y_2$=1.2$\chi$$_1$+2.7 $Y_3$= -25.2$\chi$$_1$+140.95 B. 견층 용해도의 영향 $Y_1$= -2.4$\chi$$_2$+3.43 $Y_2$=20$\chi$$_2$+3.7 $Y_3$= -120$\chi$$_2$+78.37. This experimental work was carried out to examine the relation between the filament characteristic and the tensile property of various cocoon varieties. Cocoons of 21 varieties were used as materials, from which, bave denier (X$_1$), sericin solubility (X$_2$), tenacity (Y$_1$), elongation (Y$_2$), and Young's modulus (Y$_3$) were tested. The formulae estimating tensile properties with denier and sericin solubility are as follows: A) In case of denier. Y$_1$= -0.4X$_1$+5.03 Y$_2$=1.2X$_1$+2.7 Y$_3$= -25.2X$_1$+140.95 B) In case of sericin solubility Y$_1$= -2.4X$_2$+3.43 Y$_2$=20X$_2$+3.7 Y$_3$= -120X$_2$+78.37.

Cu계 스피넬 페라이트의 Cu 함량에 따른 특성 변화

남중희,오재희 한국세라믹학회 1996 한국세라믹학회지 Vol.33 No.11

The charcteristics for the copper-contained spinel ferrites such as NiCu-and ZnCu ferrites with various copper content are investigated in this study which can provide a explanation for the behavior of copper in sintering at a low temperatuer. The bulk density and the grain size for these sintered ferrites were increased with the larger amount of copper in compositions. In microstructure of copper-contained spinel ferrites copper exists in the grain boundary which is sintering process. Electrical resistivity and frequency range with maximum Q-facor of NiCu-or ZnCu ferrites were decreased as increasing of copper content in ferrite composition.

견사의 탄성적 성질에 관한 연구 III. 신장변형과정에 있어서의 인장강도 및 Elasticity Index에 대하여

남중희 한국잠사학회 1973 한국잠사곤충학회지 Vol.15 No.1

생사의 항장성에 관여하는 기본적인 성질은 강력 신도 및 탄성이다. 그리고 이들 3자간의 적당한 조화가 생사의 특성을 발현한다. 또 생사의 이러한 역학적 거동은 이를 구성하고 있는 견사가 지배하는 것이다. 이러한 견지에서 저자는 견사의 신장변형과정에서의 항장성에 관하여 연구하고 다음과 같은 결과를 얻었다. 1. 견층별견사의 인장강력은 내층견사가 외층 및 중층견사보다 높았다. 2. 견건조과정에 있어서 견층 sericin의 습열변성은 견사의 인장강력을 변화시킨다. 3. 신장과정에 있어서 견사의 변형량이 증가하면 elasticity index가 감소한다. 4. 다습열에 의한 견층 sericin의 변성은 견사의 elasticity 를 감소시킨다. Strength, elongation and elasticity are essential properties with regard to the tensile properties of raw silk thread. The reasonable harmony of the above three physical characters appears to be the specific nature of the raw silk thread and the dynamical functions are determined by the cocoon filament forming the raw silk. From such viewpoint, the author has studied the tensile property of the thread when the cocoon filament is stretched and transformed. The results obtained are as follows: 1) The stretching strength of the inner layer filament is stronger than that of the outer and medium layer ones. 2) The stretching strength of the filaments is influenced by the moisture-heat denaturalization of cocoon layer sericin in the drying process. 3) The more transformed functions by the stretching become, the lower the elasticity index of the cocoon filament was shown. 4) When cocoon layer sericin is denatured by moisture and heat, elasticity index of the filament is decreased.

수입원료견의 견질조사

남중희 한국잠사학회 1984 한국잠사곤충학회지 Vol.25 No.2

최근, 우리나라가 외국산견을 수입하여 기계검정한 성적을 비교 분석한바 다음과 같은 결과를 얻었다. 1) 원료견의 성상이 고르지 못한데 특히 선제견비율과 건견생사량비율에서 심한 변동을 나타내었다. 2) 상위등급의 원료견을 수입하지 못하고 D,E격의 하위등급견이 수입되었으며 가격이 높은 편이다. 3) 상위격의 원료견을 수입하는 것이 향후 우러나라 견제품의 고급화를 피하리라고 본다. This survey was to realize the foreign cocoon quality and to provide data for suitable reeling conditions. Cocoons were inported from Taiwan (7 packs) and Hongkong (12 packs) in 1983. The practical inspection and classiffication of above cocoon was performed at Provincial Institute of cocoon testing and tested data were collected to evaluate the cocoon quality. The results were as follows. 1. It showed higher variation of the average raw silk yield percentage and cocoon assorting rate than domestic cocoon. 2. In view of the low quality products, cocoon price was expensive and most of packs were evaluated as inferior grade. 3. It was supposed that importing the superior quality cocoon from foreign country may be contributed to manufacturing of silk commodity of higher grade.

수출자유화에 따른 생사.견의 수급대책(요약)

남중희 한국잠사학회 1988 한국잠사곤충학회지 Vol.30 No.2

제사공업의 발전전망

남중희 한국섬유공학회 1988 한국섬유공학회지 Vol.25 No.8

견사의 탄성적성질에 관한 연구 II. 인장속도 및 팽윤에 따른 파괴강신도의 변화

남중희 한국잠사학회 1972 한국잠사곤충학회지 Vol.14 No.2

The effects of the stretching speed and the swelling degree of cocoon filaments on load-elongation curve were tested by tensilon with special attachments. The values of breaking strength, elongation at break and initial tensile strength obtained from load elongation curves are summarized as follows; 1. The breaking strength of the swollen cocoon filament appeared to increase at the high stretching speed, while elongation at break decreased. 2. Load-elongation curve became crinkled at the low speed of stretching. It suggests that both slip and break of the macrofibrils may occur in swelling of cocoon bave. 3. Breaking strength appeared to considerably decrease and elongation at break not to increase in swelling test at 9$0^{\circ}C$ for 60 min. 4. The initial tensile strength was influenced by the stretching speed and swelling degree of cocoon filaments. 팽윤견사를 수중에서 인장시킬 경우, 인장속도 및 팽윤정도의 차이가 견사의 하중신장곡선에 미치는 영향을 조사하였다. 인장시험은 Tensilon을 사용하였고, 절단시 강도, 신도 및 인장저항도를 조사한바 다음과 같은 결과를 얻었다. 1. 팽윤견사의 절단강도는 인장속도의 증가와 더부러 높아지나 절단신도는 감소하였다. 2. 견사를 팽윤(90$^{\circ}$, 15분)시켜 저속(4mm/분)으로 인장하면 견사의 macrofibril의 분리절단상태가 chart 상에 기록되었다. 3. 9$0^{\circ}C$로 장시간 팽윤처리(60분)하면 절단강도는 현저히 감소하고, 절단신도는 증가의 경향을 보였다. 4. 초기인장저항도는 인장속도 및 팽윤정도의 차이에 의하여 영향된다. 즉 고속인장은 초기인장저항도를 높이지만 팽윤도의 증가는 감소시켰다.