http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
< 전시-P-03 > 한국산 소나무의 지역에 따른 마이크로피브릴 경각 특성
송예지,이혜지,김병로 한국목재공학회 2018 한국목재공학회 학술발표논문집 Vol.2018 No.1
우리나라는 예로부터 소나무를 많이 사용해왔으며 이에 따라 목재의 특성과 기초 재질변이에 대한 연구는 많이 이루어져왔다. 그러나 지역에 따른 재질특성에 관한 연구는 거의 없는 실정이다. 목재는 수종이 같더라도 지역이나 개체, 부위에 따라 재질이 다른 경우가 많다. 우리소나무를 다루는 여러 대목장들과 이용자들을 대상으로 지역에 따라 소나무의 품질에 차이가 있는 가에 대한 설문에 102명 중 72명이 그렇다는 답변으로 전체 중 72.9%를 차지했다(한규성 등, 2016). 그러나 현재 우리나라 소나무에 대한 목재의 특성과 기초 재질변이에 대한 연구는 많은 반면, 지역에 따른 차이에 관한 연구는 거의 없는 실정이다. 따라서 본 연구는 소나무의 지역에 따른 마이크로피브릴경각을 조사하는 것에 목적을 두었다. 조사 지역은 고성, 홍천, 봉화이다. 마이크로피브릴 경각 특성은 심재, 변재로 구분하였고 각부위별로 조재, 만재로 나누어 실시하였다. 그 결과 지역에 따라 차이를 보였는데 고성, 홍천, 봉화 순으로 관찰되었다(고성: 37.35°, 홍천: 32.42°, 봉화: 25.75°). 또한 심재보다 변재에서, 만재보다 조재에서 더 큰 값을 보였다. 1연륜 내 마이크로피브릴경각 변동은 세 지역 모두 조재에서 만재로 갈수록 감소하는 경향을 보였다.
계층 군집을 이용한 효율적인 이동 집단의 소요 이동 시간 알고리즘 설계 및 구현
송예지 ( Yeji Song ),전태현 ( Taehyeon Jeon ),안진현 ( Jinhyun Ahn ),임동혁 ( Dong-hyuk Im ) 한국정보처리학회 2020 한국정보처리학회 학술대회논문집 Vol.27 No.2
본 논문은 동일 목적지를 가진 다수의 사람들이 동일 이동 수단을 탑승하여 이동할 경우 발생하는 소요 시간의 감소를 위한 거점 군집에 대해 다루려 한다. 실제 도로망에서는 노드에 해당하는 사람들의 위치가 유동적으로 변화 하고 사람 간의 거리 값 또한 변화하게 된다. 따라서 동일한 목적지를 가진 다수의 사람들이 한 대의 차량을 탑승하여 이동한다고 가정할 때 차량의 최단 경로 및 소요 시간 감소를 목적을 기반으로 설계하였다. 차량의 최단 경로를 감소시키 위해서 사람들을 군집화 하는 방법을 사용하였고 그 결과 경유지가 감소 되어 차량의 이동 경로 값은 감소되었다. 또한, 전체 이동소요 시간 역시 군집을 통해 감소시킬 수 있다. 본 논문에서는 이와 같이 군집을 이용한 최단 경로의 감소와 전체 이동시간 감소에 대한 알고리즘을 설계하고 구현하였다.
반대쪽 팔 들기 동작 시 만성요통환자와 정상인의 다열근 두께 변화 비교
송원빈,김지혁,정웅근,하예지,한성구,황보인,Song, Won-bin,Kim, Chi-hyok,Jung, Woong-keun,Ha, Ye-ji,Han, Seong-gu,Hwangbo, In 대한정형도수물리치료학회 2018 대한정형도수물리치료학회지 Vol.24 No.2
Backdround: Using RUSI (Rehabilitation Ultra Sound Imiging) method, which showed high reliability in soft tissue measurements, we compared the muscle relax and contraction, sex, and physical characteristics of the activity of the multifidus muscle in patients with chronic low back pain and normal subjects. Methods: In this study, 16 patients (male: 8, female: 8) with chronic low back pain and 16 healthy adult (male: 8, female: 8) were participated. Subjects lied prone posture on the table with elbow flexed $90^{\circ}$ and shoulder abducted $120^{\circ}$ (starting position). Test was applied two types that muscle relax position and muscle contraction position. Muscle relax position is equal to starting position and muscle contraction position is that upper extremity lift up about 5cm from the table. We measured the thickness of the multifidus muscle in each position by ultrasound. Results: There was a statistically significant difference between the two groups in deviation of Both Side Difference of Activated resting-Arm Lifting Ratio according to posture change between the chronic low back pain patient group and the normal group. Conclusion: The result of this study support previous study showing that there is an imbalance in the activity of multifidus in patients with chronic low back pain.
섬유기반 센서정보를 활용한 실시간 피트니스 자세교정 서비스를 위한 i-Fitness 플랫폼 구현
오예지(Ye-Ji Oh),송재종(Chai-Jong Song) 대한전자공학회 2018 대한전자공학회 학술대회 Vol.2018 No.6
In this paper, we implement I-Fitness platform for providing real-time self-correction of fitness posture based on textile stretch sensors. The Goal of this platform is user to take advantages of improving fitness performance through feedback and intuitive web user interface by analyzing sensor data acquired from several parts of user’s body. To archive this perforce, we design i-Fitness platform consists of 6 main modules including analysis engine, DB module and launcher module.
0.18 μm CMOS 공정을 이용한 실리콘 뉴런 회로 설계
한예지(Ye-Ji Han),지성현(Sung-Hyun Ji),양희성(Hee-Sung Yang),이수현(Soo-Hyun Lee),송한정(Han-Jung Song) 한국지능시스템학회 2014 한국지능시스템학회논문지 Vol.24 No.5
생물학적 신경 세포의 모델링을 위한 펄스타입 실리콘 뉴런 회로를 0.18 μm CMOS 공정을 이용하여 반도체 집적회로로 설계하였다. 제안하는 뉴런 회로는 입력 전류신호를 위한 커패시터 입력단과, 출력 전압신호 생성을 위한 증폭단 및 펄스신호 초기화를 위한 MOS 스위치로 구성된다. 전압신호 입력을 전류신호 출력으로 변환하는 기능의 시냅스 회로는 몇 개의 PMOS와 NMOS 트렌지스터로 이루어지는 범프회로를 사용한다. 제안하는 뉴런 모델의 검증을 위하여, 2개의 뉴런과 시냅스가 직렬연결된 뉴런체인을 구성하여 SPICE 모의실험을 실시하였다. 모의실험 결과, 뉴런신호의 생성과 시냅스 전달특성의 정상적인 동작을 확인하였다. Using 0.18 μm CMOS process silicon neuron circuit of the pulse type for modeling biological neurons, were designed in the semiconductor integrated circuit. Neuron circuiSt providing is formed by MOS switch for initializing the input terminal of the capacitor to the input current signal, a pulse signal and an amplifier stage for generating an output voltage signal. Synapse circuit that can convert the current signal output of the input voltage signal, using a bump circuit consisting of NMOS transistors and PMOS few. Configure a chain of neurons for verification of the neuron model that provides synaptic neurons and two are connected in series, were performed SPICE simulation. Result of simulation, it was confirmed the normal operation of the synaptic transmission characteristics of the signal generation of nerve cells.
0.35 um CMOS 공정을 이용한 플라이백 컨버터용 피크검출기의 집적회로 설계
한예지(Ye-Ji Han),송한정(Han-Jung Song) 한국산학기술학회 2016 한국산학기술학회논문지 Vol.17 No.7
본 논문에서는 플라이백 DC-DC 컨버터에 사용되는 출력전압 정보를 보다 정확하게 감지하는 피크검출기를 집적회 로로 설계하였다. 제안하는 피크검출기의 회로는 하나의 op-amp와 세 개의 트랜지스터로 이루어져 있다. 제안하는 회로는 단순한 구조로 이루어져 있기 때문에 제안하는 회로는 출력전압을 감지하는 과정에서 지연시간을 최소화 할 수 있다. 회로에 서 op-amp와 몇 개의 트랜지스터를 사용함으로써, 제안하는 피크검출기가 종래의 커패시터와 다이오드로 설계된 피크검출기 를 대신해 칩의 집적화가 가능해지고, 플라이백 컨버터의 모듈을 구성하는 소자가 트랜지스터로 대체되고 칩의 면적이 줄어 들어 가격을 줄일 수 있다. 제안하는 회로는 0.35 um CMOS 공정을 이용하여 칩으로 제작하여 측정하였고, 칩 측정결과 모의실험결과와 잘 일치함을 보였다. 시뮬레이션 결과 사인파의 입력신호를 출력신호가 최대 0.3 ∼ 3.1 %의 오차 범위 내에 서 피크전압을 유지하는 것을 확인하였다. 칩 측정결과 모의실험결과와 잘 일치함을 보였다. 제안하는 회로의 결과를 통하여 종래의 피크검출기 회로의 좋지 않은 레귤레이션을 향상시키기 위하여 높은 플라이백 컨버터의 동작을 보일 수 있다. 플라이 백 컨버터의 출력전압을 정확하게 감지하여 안정적인 컨버터 동작을 할 수 있을 것으로 사료된다. In this paper, a high-precision peak detector circuit that detects the output voltage information of a fly-back converter is proposed. The proposed design consists of basic analog elements with only one operational amplifier and three transistors. Because of its simple structure, the proposed circuit can minimize the delay time of the detection process, which has a strong impact on the precision of the regulation aspect of the fly-back converter. Furthermore, by using an amplifier and several transistors, the proposed detector can be fully integrated on-chip, instead of using discrete circuit elements, such as capacitors and diodes, as in conventional designs, which reduces the production cost of the fly-back converter module. In order to verify the performance of the proposed scheme, the peak detector was simulated and implemented by using a 0.35 m MagnaChip process. The gained results from the simulation with a sinusoidal stimulus signal show a very small detection error in the range of 0.3∼3.1%, which is much lower than other reported detecting circuits. The measured results from the fabricated chip confirm the simulation results. As a result, the proposed peak detector is recommended for designs of high-performance fly-back converters in order to improve the poor regulation aspect seen in conventional designs.