http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서원태,장준호,장윤영,장현태 한국산학기술학회 2022 한국산학기술학회논문지 Vol.23 No.9
Combustion of a mixture of fossil fuel and organic sludge is the most efficient method for the treatment of combustible wastes in order to reduce carbon dioxide generation due to the reduction of fossil fuel use. The high heat and mass transfer efficiency from fluidized bed combustion allows utilization of various fuels, in which the ash of solid fuel is discharged as bottom ash and fly ash. This study analyzes the discharge characteristics of organic sludge ash in a fluidized bed. Therefore, attrition and elutriation characteristics of organic sludge ash were examined by using the ASTM D5757-95 method and 1½-inch and four-inch fluidized beds, respectively. The ASTM D5757-95 method measures particle attrition via air jet. The particle size range was 200 μm and under. For particle sizes of 200㎛ and over, attrition characteristics were measured in a 1½-inch fluidized bed with only organic sludge and in a four-inch fluidized bed with bed material sand and organic sludge. The pressure fluctuation properties were measured in a four-inch fluidized bed by four pressure sensors installed at intervals of 0.03m above the distributor plate. Pressure fluctuation properties, such as mean pressure and standard deviation of the pressure fluctuations were calculated. From the pressure fluctuation properties, it was possible to predict particle attrition and elutriation of organic sludge in the fluidized beds. The organic sludge was fed into the fluidized bed for attrition and elutriation from friction and collision between particles and the wall and the jet of the supply air. It was found that suspended particles carried the combustion gas. 화석연료 사용 감소에 따른 이산화탄소 발생 저감을 위한 가연성 폐기물의 처리 방법으로 혼합연소가 가장 효율적 방법이다. 유동층연소로는 열 및 물질전달 효율이 높으므로 다양한 연료 사용이 가능하고 높은 전열 강도를 지니고있다. 유동층연소로는 투입된 연료의 회분 성분이 바닥재와 비산재로 배출된다. 본 연구에서는 유동층에 공급된 유기성오니 회분의 배출 특성을 규명하고자 연구를 수행하였다. 따라서 유기성 오니 회분의 마모 및 비산유출 특성을 ASTM D5757-95 방법과 1½, 4인치 유동층에서 각각 수행하였다. ASTM D5757-95는 200㎛ 이하 입자의 마모를 연구하였으며, 200㎛ 이상의 입자는 1½인치 유동층에서는 유기성 오니만을 충전한 상태에서의 마모 특성, 4인치 유동층에서는층물질 모래와 유기성 오니를 충전하여 마모 특성을 측정하였다. 또한 내경 4인치 유동층에서는 유동층 분산판으로부터0.03m 간격으로 4개의 압력센서를 설치하여 유동층의 압력요동 특성을 측정하였다. 측정된 압력값으로부터 압력요동특성치인 평균압력과 압력요동의 표준편차를 계산하였다. 압력요동특성치로써 유동층에서 유기성 오니의 마모 유출특성을 관측할 수 있는 방법을 제시할 수 있었다. 유동층에 공급된 유기성 오니는 입자간 및 기벽과의 마찰과 공급공기의jet에 의하여 마모 비산되어 연소가스에 동반되어 유출되는 것을 알 수 있었다.
지아장커 영화, 중국사회에 대한 비판적 성찰과 실험적 기록
서원태 ( Won Tae Seo ) 한양대학교 현대영화연구소 2010 현대영화연구 Vol.6 No.1
This study approaches the filmmaking methods of Jia Zhanke by analyzing the effects of changed china film industry and the principle of directing style in terms of form. So called `sixth generation` movement of china cinema is used for understanding a relationship between Jia Zhanke`s film and historical aspect of china cinema. And by analyzing the formal aspect of his film, we are able to figure out the personal style of his filmmaking and objectify the analyze method in a various way. Generally, Jia Zhangke`s directing method is based on the documentary style. however this is not a precondition of his filmmaking. The reason Jia Zhanke utilizes the characteristics of documentary filmmaking has been more than just using conventional language of documentary genre. Jia Zhangke`s documentary style is based on his way to observe society of china critically. The cinematic characteristics of Jia Zhanke`s film can be understood in these four context; observation and aboriginality, fictional expression for realistic description, contingency and improvisation, foregrounding of characters. Analysis based on these four elements gives possibilities to understand Jia Zhangke`s personal style of filmmaking beyond the general interpretation based on the `discussion of six generation movement`.
일본실험영화 미학 연구 -이토 다카시 영화에 나타난 구조적 경향연구-
서원태 ( Seo Won-tae ) 부산대학교 영화연구소 2016 아시아영화연구 Vol.9 No.1
이토 다카시(Ito Takashi)는 일본을 대표하는 실험영화 작가이다. 다카시의 실험영화에는 서구의 구조주의 영화에서 볼 수 있는 양식적 공통점이 관찰된다. 다카시의 영화가 서구의 구조주의 영화의 양식과 닮아 있으나 그 미학적 뿌리가 서구 실험영화사나 서구 아방가르드 예술사에 직접적으로 닿아있지는 않다. 다카시 영화에 나타난 양식적 외피와 그 이면의 실험영화 미학을 규정하기 위해서는 그의 영화를 작품자체 뿐만 아니라 개인적인 측면, 문화적인 측면과 연계하여 총체적으로 분석할 필요가 있다. 그의 미학적 성취는 작가 개인의 사진과 영화매체에 대한 관찰과 반복된 실험의 결과물이다. 다카시의 영화는 그 연대기적 시간차만큼이나 서구의 모더니즘 예술영화나 이른바 ``실험영화``들과 거리를 두고 있다. 환영주의에 기초한 주류영화 해체에 구조영화의 미학적 목표가 있다면 다카시의 영화는 해체가 아닌 숭고의 개념을 기초로 한 포스트모던적 성격에 기초해 있다. Ito Takashi is one of representative Japanese experimental film-maker. There is a common element between structural film and Takashi`s film in terms of style. Nevertheless, the root of Takshi film`s aesthetic is not based on the Western Avant-garde film history directly. To define the aesthetic of Takashi`s film, various analytical approaches are needed including individual aspect as an artist, cultural aspect and aesthetic analysis. Takashi`s film is far from the western Avant-garde film history from an aesthetic point of view. While structural film has aimed to destroy illusionistic realism of main stream feature films such as hollywood films, Takashi`s film is based on the post-modern characteristic of arts, which is the sublime.