http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
저온 분자선 에피택시법을 이용한 GaMnAs 자성반도체 성장 및 특성 연구
박진범,고동완,박용주,오형택,신춘교,김영미,박일우,변동진,이정일,Park Jin-Bum,Koh Dongwan,Park Young Ju,Oh Hyoung-taek,Shinn Chun-Kyo,Kim Young-Mi,Park Il-Woo,Byun Dong-Jin,Lee Jung-Il 한국재료학회 2004 한국재료학회지 Vol.14 No.4
The LT-MBE (low temperature molecular beam epitaxy) allows to dope GaAs with Mn over its solubility limit. A 75 urn thick GaMnAs layers are grown on a low temperature grown LT-GaAs buffer layer at a substrate temperature of $260^{\circ}C$ by varying Mn contents ranged from 0.03 to 0.05. The typical growth rate for GaMnAs layer is fixed at 0.97 $\mu\textrm{m}$/h and the V/III ratio is varied from 25 to 34. The electrical and magnetic properties are investigated by Hall effect and superconducting quantum interference device(SQUID) measurements, respectively. Double crystal X-ray diffraction(DCXRD) is also performed to investigate the crystallinity of GaMnAs layers. The $T_{c}$ of the $Ga_{l-x}$ /$Mn_{x}$ As films grown by LT-MBE are enhanced from 38 K to 65 K as x increases from 0.03 into 0.05 whereas the $T_{c}$ becomes lower to 45 K when the V/III ratio increases up to 34 at the same composition of x=0.05. This means that the ferromagnetic exchange coupling between Mn-ion and a hole is affected by the growth condition of the enhanced V/III ratio in which the excess-As and As-antisite defects may be easily incorporated into GaMnAs layer.
박진범,채종성,김정규,김성희,엄태인,문승현 한국폐기물자원순환학회 2013 한국폐기물자원순환학회 학술대회 Vol.2013 No.2
2011년 고함수 슬러지 발생량을 보면 폐수슬러지가 년간 306만톤, 하수슬러지가 230만톤 배출된다. 정부는 런던협약 준수와 해양 생태계 보호를 위해 2012년부터 유기성 하수슬러지, 2013년 음식폐기물과 축산분뇨 해양배출을 전면 금지하였고, 2014년부터는 유기성 폐수슬러지도 해양배출이 금지될 예정이다. 폐수슬러지와 하수슬러지는 80% 이상이 수분인 고함수 슬러지이다. 따라서 본격적인 처리에 앞서 이를 건조시키는 기술이 매우 중요하다. 유중건조기술은 고함수 슬러지에서 짧은 시간에 많은 양의 수분을 증발시키는 건조기술이다. 유중 건조된 슬러지는 창고에 적재하거나 장거리 이동시 수송기관에 적재한다. 이때 가장 문제가 되는 것은 자연발화현상이다. 실제로 자연발화 현상은 석탄 야적장에서 종종 관찰되는 현상이다. 유중건조 기술에 의해 건조 된 슬러지의 자연발화 실험결과를 Fig. 1에 나타내었다. 현재 국내외적으로 자연발화에 관한 구체적인 실험방법이 정해져있지 않기 때문에 각 연구기관에서 비공식적인 방법으로 자연발화 현상을 관찰하고 있다. 본 연구에서의 자연발화 실험은 측정하고자 하는 시료를 같은 크기로 분쇄하여 금속관에 투입 후 오븐에 수직으로 장착한 후 오븐의 온도를 일정하게 상승시키면서 시료가 채워진 금속관에 공기 및 질소를 주입하여 자연발화 현상을 관찰하는 방법이다. 슬러지 시료는 기름을 분리한 것과 분리하지 않은 것 2종류이다. 2종류 모두 오븐 온도보다 낮게 유지되는 것을 알 수 있다. 따라서 시료의 온도가 200 ℃ 이내로 유지된다면 자연발화 현상이 일어나지 않는다.
The Ag Electrode for non-aqueous Li-air Batteries
박진범,선양국 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.1
Present Li-air batteries have still many problems to be satisfactorily applied to electrical vehicles. One of them is the low round-trip efficiency. The cause of low round-trip efficiency is largely due to the formation of Li<sub>2</sub>CO<sub>3</sub> during cycling of Li-air batteries because Li<sub>2</sub>CO<sub>3</sub> decomposes at a potential higher than 4V. Li<sub>2</sub>CO<sub>3</sub> is typically formed by decomposition of the carbon materials in the electrodes and the organic solvent. Li<sub>2</sub>CO<sub>3</sub> formed by decomposition of carbon materials occupies half of whole Li<sub>2</sub>CO<sub>3</sub> formed by decomposition of carbon in electrode and solvent in electrolyte. In this study, we employ Ag-coated air electrode prepared by electrodeposition. The electrodeposition is one of the simplest metal deposition methods and easily adaptable to a large scale production.