테마파크의 환경단서 분석과 발전방안에 관한 연구 : 대전동물원(오­월드) 방문객을 중심으로

박종진(Park, Jong-jin),최지혜(Choi, Jie-hye) 한국부동산정책학회 2017 不動産政策硏究 Vol.18 No.3

The purpose of this study is to investigate Daejeon Zoo(O-world), which has been attracting attention as a leisure space of Daejeon citizens, in order to complement the scarce tourism resources in Daejeon area and to improve visitor satisfaction and return visit through more efficient and pre - And to suggest a strategy. Especially, it is an empirical study to present the direction that the Daejeon Zoo should prepare or proceed through the analysis of the environmental cues of the Daejeon Zoo. The purpose of this study is to present practical implications. As a result of the study, the most high level of visitor s problems is the necessity to improve the facilities inside the park. In addition, the cost per person is low compared to other theme parks, and the time required to stay is low. Therefore, most of the visitors are not able to use the annual membership or discount program, In order to overcome these problems, it is essential to install more new facilities in the park and to develop new programs that can operate continuously.

H 형강압연 해석기술의 응용

박종진,김정호 ( Jong Jin Park,Jeong Ho Kim ) 대한금속재료학회 1996 압연기술의 현재와 미래 Vol.- No.-

정신건강 관리용 모바일 헬스케어 앱 개발 -분노 관리를 중심으로-

박종진,최규석,김정래,박인규,강정진,손병기,Park, Jong-Jin,Choi, Gyoo-Seok,Kim, Jeong-Lae,Park, In-Kyoo,Kang, Jeong-Jin,Son, Byeong-Ki 한국인터넷방송통신학회 2014 한국인터넷방송통신학회 논문지 Vol.14 No.6

본 논문은 현대인이 받는 각종 스트레스와 압박 및 내적 갈등으로 인해 발생되는 분노의 관리를 위해 정신건강 관리용 모바일 헬스케어 앱을 개발한다. 분노의 작동 기전과 신체 질병과의 관계성에 대한 내용을 다루고 이를 효율적으로 관리, 해결하기 위한 정보를 제공하는 앱 컨텐츠를 개발하고 웹앱(Web App)으로 구현하였다. 앱을 사용하는 사용자에게 분노관리와 관련된 유용한 정보를 제공하고 사용하기 편리하도록 메뉴를 구성하였다. 구현된 앱은 분노와 관련된 정보, 신체 건강과의 연관성에 대한 정보, A형 성격이나 적대감 테스트, 스트레스 경향 테스트, 정신 생산성 진단 테스트(KMPI), 일지 쓰기, 분노 관리, 상담 등의 기능을 제공한다. In this paer, mobile healthcare App is developed for mental health management focused on anger management for modern people who are under constant stress and various inner conflicts. We describe mechanism of anger and relations between disease and anger, and constitute contents of App to provide information of anger management. And finally we implement Web App. We build menu of App to be convenient to users to use. Implemented App provides many useful functions like information of anger and body, various self-test including A-type test, hostility test, and KMPI etc., journaling, anger management and community.

건조방법에 따른 홍삼 절편의 품질 변화

박종진,박대희,이원영,Park, Jongjin,Park, Daehee,Lee, Wonyoung 한국식품저장유통학회 2017 한국식품저장유통학회지 Vol.24 No.3

본 연구에서는 원적외선 건조 조건에 따른 홍삼 절편의 품질 특성을 알아보았다. TPC, TFC, DPPH의 경우 65도에서 가장 높은 값을 보였으며 이후에 감소하는 추세를 나타내었다. 건조온도를 65도로 고정한 후 0-90분 간 원적외선 건조를 진행했을 때, 60분에 약 10% 수분함량을 보였으며 TPC는 60-90분, TFC는 60분, DPPH는 75분에서 최고값을 나타내었다. 그리고 홍삼 절편에 원적외선, 열풍, 감압, 동결건조를 60분 간 처리한 후 비교했을 때, TPC와 TFC는 감압 및 원적외선 건조에서 유의적으로 높은 값을 보였으며, DPPH의 경우 열풍건조를 했을 때 가장 높은 활성을 나타내었다. 건조 방법에 따른 홍삼 절편의 색도를 비교하였을 때, L, a, b 값은 원적외선, 열풍, 감압 건조 시 감소하였고, 동결 건조 시에는 증가하였다. This study investigated quality change of ginseng depending on far-infrared (FIR) drying methods. The ginseng was cut into 2 mm slices and measured moisture content (MC), color, total polyphenol content (TPC), total flavonoid content (TFC) and DPPH radical scavenging activity (DPPH). The color values (L, a, and b) were decreased after far-infrared (FIR) drying. As increase in drying time, color was changed. Considering quality parameters including MC, TPC, TFC, and DPPH, the optimum condition for drying was set at $65^{\circ}C$ for 60 min. Furthermore, we compared color and functional compounds depending on drying process including FIR, freeze-, vacuum, and hot-air drying. The color values of ginseng were decreased when dried using vacuum and hot-air. While the color values of ginseng were increased after freeze drying. Comparison with another drying method, FIR drying presented the highest color difference. FIR and vacuum-dried ginseng indicate higher contents of TPC and TFC than freeze- and hot air-dried ginseng. And hot-air-dried ginseng present the highest DPPH when compared to another drying methods. On the other hand, freeze dried ginseng show the lowest TPC, TFC, and DPPH.

교통사고분석에서 EDR 기록정보의 채택에 관한 고찰

박종진,박정만,이연섭,Park, Jongjin,Park, Jeongman,Lee, Yeonsub 한국자동차안전학회 2020 자동차안전학회지 Vol.12 No.3

Usage of EDR(Event Data Recorder) report for traffic accident analysis is currently increasing due to government regulation of EDR data release. Nevertheless, a lot of investigators simply adopt by comparing the number of ignition cycles(crash) at event to the number of ignition cycles(download) without an exact judgment whether event data occurred by this accident or not. In the EDR report, besides ignition cycles, there are many factors such as event record type, algorithm active(rear/rollover/side/frontal), time between events, event severity status(rollover/rear/right side/reft side/frontal), belt switch circuit status, driver/passenger pretensioner/air-bag deployment, PDOF(Principal Direction of Force) by ΔV to be able to decide whether or not to adopt. also the event data is considered enough to vehicle damaged state, accident situation at the scene of the accident. and there is described in "all data should be examined in conjunction with other available physical evidence from the vehicle and scene" in the CDR(Crash Data Retrieval) report. Therefore many investigators have to decide whether or not to adopt after they consider sufficiently to above factors when they are the traffic accident analysis and investigate the causes of a accident on the adopted event data. In this paper, we report to traffic accident investigators notable points and analysis methods on the basis of thousands of cases and the results of one's own experiment in NFS(National Forensic Service).

PDP 격벽의 롤 포밍을 위한 그루브와 프리폼의 설계

박종진,황한섭,김용석,전형조,Park, Jong-Jin,Hwang, Han-Sub,Kim, Yong-Seog,Jeon, Hyung-Cho 대한기계학회 2002 大韓機械學會論文集A Vol.26 No.10

Among various methods to manufacture the PDP barrier ribs, the pressing and the roll forming methods are simple and economical because they form the ribs by utilizing the plastic flow of the green tape in a relatively short time without generating air-polluting dusts. In the present study, the roll forming method was investigated by experiments as well as numerical analyses and in result the groove roll and the preform were designed. The effect of draft angle, corner radius, and initial thickness of the green tape on the plastic flow was examined by a series of parametric studies. The preform was recommended to ease the plastic flow into the grooves and to avoid the occurrence of cracks during rolling and sintering processes.

퍼지 모델과 유전 알고리즘을 이용한 쓰레기 소각로의 연소 제어

박종진,최규석,Park, Jong-Jin,Choi, Kyu-Seok 한국정보처리학회 2000 정보처리논문지 Vol.7 No.7

본 논문에서는 퍼지 모델과 유진 알고리즘을 이용한 쓰레기 소각로의 언소 제어를 제안한다. 먼저 복잡하고 비선형 시스템인 소각로의 퍼지 모델을 얻기 위해 퍼지 모델링이 수행된다. 얻어진 퍼지 모델은 주어지는 입력에 대해 소각로의 출력을 예측한다. 그리고 유전 알고리즘을 이용하여 원하는 소각로 츨려에 대해 모든 가능한 해 집합 안에서 최적 제어입력 값을 탐색하고 얻어진 최적 제어입력은 소각로에 인가되어 제어가 행해진다. 제안된 방법의 성능을 평가하기 휘해, 증발량을 출력으로 하는 소각로 연소제어의 컴퓨터 시뮬레이션이 수행되었다. 그 결과, 소각로의 퍼지 모델의 성능 평가지수 ISE(오차제곱 적분)는 0015로 매우 작았으며, 연소제어 시 증발량은 설정값 주위에서 일정하게 유지되고, 제안된 방법에 의한 성능지수 ITAE는 352로 수동운전에 의한 결과 1275보다 우수하였다. In this paper we propose combustion control of refuse incineration plant using fuzzy model and genetic algorithm. At first fuzzy modelling is performed to obtain fuzzy model of the refuse incineration plant and obtained fuzzy model predicts outputs of the plant when inputs are given. Fuzzy model ca be used to obtain control strategy, and train and enhance operators' skill by simulating the plant. Then genetic algorithms search and find out optimal control inputs over all possible solutions in respect to desired outputs and these are inserted to plant. In order to testify proposed control method, computer simulation was carried out. As a result, ISE of fuzzy model of refuse incineration plant is 0.015 and ITAE of control by proposed method, 352 which is better than that by manual operation.

첨단안전장치 장착 버스의 사고사례 분석

박종진,최영수,박정만,Park, Jongjin,Choi, Youngsoo,Park, Jeongman 한국자동차안전학회 2021 자동차안전학회지 Vol.13 No.3

Recently a traffic accident of heavy duty vehicles under the mandatory installation of ADAS (Advanced Driver Assistance System) is often reported in the media. Heavy duty vehicle accidents are normally occurring a high number of passenger's injury. According to report of Insurance Institute for Highway Safety, FCW (Forward Collision Warning) and AEB (Automatic Emergency Braking) were associated with a statistically significant 12% reduction in the rate of police-reportable crashes per vehicle miles traveled, and a significant 41% reduction in the rear-end crash rate of large trucks. Also many countries around the world, including Korea, are studying the effects of ADAS installation on accident reduction. Traffic accident statistics of passenger vehicle for business purpose in TMACS (Traffic safety information Management Complex System in Korea) tends to remarkably reduce the number of deaths due to the accident (2017(211), 2018(170), 2019(139)), but the number of traffic accidents (2017(8,939), 2018(9,181), 2019(10,095)) increases. In this paper, it is introduced a traffic accident case that could lead to high injury traffic accidents by being equipped with AEB in a bus. AEB reduces accidents and damage in general but malfunction of AEB could occur severe accident. Therefore, proper education is required to use AEB system, simply instead of focusing on developing and installing AEB to prevent traffic accidents. Traffic accident of AEB equipped vehicle may arise a new dispute between a driver's fault and vehicle defect. It is highly recommended to regulate an advanced event data recorder system.

소성가공을 위한 연성파괴조건의 재고찰

박종진,이영석,Park, Jong-Jin,Lee, Young-Seok 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.7

In metalforming, ductile fracture criteria have been used for the purpose of predicting fracture occurrence in the stage of process design prior to manufacturing. In the present investigation, some of popular criteria are reviewed to find the most suitable one among them. As a result, it is found that the modified Cockroft and Latham criterion is better than others. The reasons are: it agrees with Roy's and McClintock's void growth models, it is more general than Oyane's and Kuhn's criteria, and it predicts fractures in compression as well as in tension well. However, it is also found that the criterion is incapable of predicting fractures in torsion.

베벨기어 페쇄단조의 유한요소해석

박종진,이정환,이영선,Park, Jong-Jin,Lee, Jung-Hwan,Lee, Young-Sun 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.8

The rigid-plastic finite element analysis was performed for analysis of ofhot forging and cold sizing of a bevel gear. Two dimensional analysis was carried out to investigate the defect occurrence on vertical symmetric planes during hot forging and three dimensional analysis was to understand the filling behavior on horizontal planes during cold sizing. The involute curve of a tooth was approximated by a circle for convenience in the present analysis. In order to estimate the elastic deformation of the gear and dies during cold sizing, linear elastic finite element analysis was performed. Results of the analysis can be used to predict grain flows and strength distributions in the forged gear, and to design dies and an appropriate preform for the cold sizing.