http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박대철,Park, Dae-Chul 한국융합신호처리학회 2010 융합신호처리학회 논문지 (JISPS) Vol.11 No.4
본 논문에서는 ITU-R 기고문과 권고안에 따라 양안 업체 영상에 대한 화질, 깊이감, 명료성, 실재감 항목을 모노 영상에 대비하여 DSCQS(Double-Stimuli Continuous Quality Scale) 방법을 사용하여 평정척도법에 의해 분석하였다. 평가 결과는 자연 실외 영상, 그래픽 영상, 실내 영상으로 구성된 평가 대상 영상에 대하여 전반적인 화질의 차나 명료성은 모노인 경우나 입체 영상인 경우나 별 차이를 나타내지 않았으나(대강 3.0 이상 -4.0 이하), 입체 영상의 깊이감 인지와 실재감에 대해서는 업체 영상인 경우 모두 5.0등급 중 4.0 등급 이상을 나타내어 깊이감 및 실재감 정보가 주는 인상이 매우 큼을 시사해준다. 양안 3DTV 촬영이나 편집시 시차 등 휴먼 팩터로 평가결과가 고려되어져야 할 것이다. In this paper, we carried out quality assessment and analysis of stereoscopic 3D Television pictures according to ITU-R contribution and recommendation by rating scales using DSCQS (Double-Stimuli Continuous Quality Scale) method. The evaluation results show that overall quality and sharpness of stereoscopic pictures revealed almost no difference compared to cases of mono pictures as to natural outdoor scenes, graphic images, and indoor scenes (about 3.0 above ~ 4.0), but depth perception and sensation of reality of stereoscopic images exhibit better quality performance over mono images as indicated more than 4.0 out of 5.0 grade. Evaluation results should be considered as human factors such as disparity when shooting and/or editing 3DTV.
DBS 응용을 위한 다채널 MPEG 비디오의 연합 비트육 - 왜곡 제어
박대철(Park Dae Chul),최미란(Choi Mi Ran),정두영(Jung Doo Young) 한국정보처리학회 1998 정보처리학회논문지 Vol.5 No.2
Buffered rate-distortion control method of MPEG 2 compressed video channel is considered for DBS applications. A joint rate-distortion control algorithm of multichannel sources is proposed to control overall picture quality by putting some constraints on encoder's quantization parameters and buffer occupancy state to allow a limited variable bitrate (VBR) coding within a GOP block. A major drawback for video transmission over a conventional fixed rate channel without using VBR encoder is that received picture quality varies greatly, resulting in non-uniform subjective visual impairments. In order to minimize these effects buffered-constrained rate-distortion control within a GOP block level finds an optimal solution in a combined rate-distortion sense by permitting a VBR encoding over larger image sequences rather than local intra-frame based rate control with the aid of the direct feedback of the buffer state into the cost measure when multichannel programs are statistically multiplexed. Results indicate some quality gains and resources saving over the conventional constant bit rate method.
박대광(Dae-Kwang Park),김재열(Jae-Yeol Kim),곽남수(Nam-Su Kwak),이건(Gun Lee),한정철(Jung-Chul Han),유신(Sin You),양동조(Dong-Jo Yang) 한국생산제조학회 2010 한국공작기계학회 추계학술대회논문집 Vol.2010 No.-
Recently, Nano-technology is instituted to important element each in many fields. As the reason machine that make machine-part may become factor of generation of electricity of all industry machines. Specially, reflectors, aspheric lens and processing of optical communication medium is needed for ultraprecision processing technology because of this study to aid it. Distance that it is decided to need most in ultraprecision control can separate ordinary machine nano control machine how to make position compensation exactly. This research is suggested for alteration method that can be produced from ordinary machine to ultraprecision machine. Basic-structure of ultraprecision stage is compensated for yawing and lolling errors that is made at transfer. Errors are happened when machine is moving itself of X, Y, Z direction and natural environment vibration. In this way, research that various methods to compensate is studying in a lot of research institutes or school-labs, in present. Usually fast servo tools are taken compensation after finished control. However, in this treatise, when stage of X axis be transported 0㎜ to 100㎜ distance, ultraprecision nano stage is compensated with rolling and transfer error Of axis. Ultimate object of this research is to enhance life about spindle of this machine.
DCT/DFT Hybrid Architecture Algorithm Via Recursive Factorization
박대철,Park, Dae-Chul The Korea Institute of Convergence Signal Processi 2007 융합신호처리학회 논문지 (JISPS) Vol.8 No.2
본 논문은 순환 행렬 분해에 의한 DCT와 DFT의 고속 계산을 위한 하이브리드 아키텍쳐 알고리듬을 제안한다. DCT-II와 DFT 변환 행렬의 순환 분해는 알고리듬적으로 구현하기가 유사한 구조를 제공하며 이것은 단순히 스위칭 모드의 제어에 의해 공통 아키텍쳐를 사용할 수 있게 한다. 두 변환간의 연계는 행렬 순환 공식에 기초하여 유도되었다. DCT/DFT 행렬 분해를 위한 하이브리드 구조 설계를 가능하도록 생성 행렬, 삼각함수 항등식 과 관계식을 사용하여 유도되었다. DCT/DFT 하이브리드 아키텍쳐를 수용하는 쿨리-투키 유형의 고속처리 아키텍쳐에 대한 데이터 흐름도를 작성하였다. 이 데이터 흐름도로부터 적절한 크기의 N에 대해 제안한 알고리듬의 계산 복잡도는 기존의 고속 DCT 알고리듬과 비교할만하다. 다른 직교변환 계산에 FFT 구조의 다중 모드 사용 확장을 위해 좀더 확장된 연구가 필요하다. This paper proposes a hybrid architecture algorithm for fast computation of DCT and DFT via recursive factorization. Recursive factorization of DCT-II and DFT transform matrix leads to a similar architectural structure so that common architectural base may be used by simply adding a switching device. Linking between two transforms was derived based on matrix recursion formula. Hybrid acrchitectural design for DCT and DFT matrix decomposition were derived using the generation matrix and the trigonometric identities and relations. Data flow diagram for high-speed architecture of Cooley-Tukey type was drawn to accommodate DCT/DFT hybrid architecture. From this data flow diagram computational complexity is comparable to that of the fast DCT algorithms for moderate size of N. Further investigation is needed for multi-mode operation use of FFT architecture in other orthogonal transform computation.
단순 엘레멘트 인버스를 이용한 DCT/DFT 하이브리드 알고리즘
이광재,박대철,이문호,신태철,진주,Lee, Kwang-Jae,Park, Dae-Chul,Lee, Moon-Ho,Sin, Tae-Chol,Chen, Zhu 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.6c
본 논문에서는 하이브리드 구조에 의한 DCT/DFT 행렬의 새로운 표현을 제시한다. 엘레멘트 인버스 소행렬 분해 알고리즘에 근거하여 DCT와 DFT가 동일한 반복 연산 패턴을 갖고 있음을 보이며, 몇몇 대각행렬을 이용한 하이브리드 구조를 개발한다. In this paper, we present new representation of DCT/DFT matrices via one hybrid architecture. Based on a element inverse matrix factorization algorithm, we show that the DCT and DFT have a same recursive computational pattern, and we can develop an hybrid architecture by using some diagonal matrices.
엘레멘트 인버스 재킷 변환과 유사한 DFT의 새로운 희소 행렬 분해
이광재,박대철,이문호,최승제,Lee, Kwang-Jae,Park, Dae-Chul,Lee, Moon-Ho,Choi, Seung-Je 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.4C
This paper addresses a new representation of DFT matrix via the Jacket transform based on the element inverse processing. We simply represent the inverse of the DFT matrix following on the factorization way of the Jacket transform, and the results show that the inverse of DFT matrix is only simply related to its sparse matrix and the permutations. The decomposed DFT matrix via Jacket matrix has a strong geometric structure that exhibits a block modulating property. This means that the DFT matrix decomposed via the Jacket matrix can be interpreted as a block modulating process. 본 논문은 엘레멘트 인버스 처리에 근거한 재킷 변환을 통한 DFT 행렬의 새로운 표현을 다룬다. DFT 행렬의 역을 단지 재킷 변환의 소행렬 분해에 따라 표현하며 이러한 결과는 DFT 행렬의 역이 단지 이의 희소 행렬과 치환 행렬에만 관련됨을 보여준다. 재킷 행렬을 통한 DFT 행렬의 분해는 블록 변조 특성을 나타내는 강한 기하 구조를 갖는다. 이는 재킷 행렬을 통해 분해된 DFT 행렬은 블록 변조 과정으로 해석할 수 있음을 의미한다.
Mo/SiO<sub>2</sub> 촉매상에서 t-Butyl hydroperoxide에 의한 염화알릴의 에폭시화반응에 관한 속도론적 연구
김성우,박대원,정종식,박대철,Kim, Sung-Woo,Park, Dae-Won,Chung, Jong-Shik,Park, Dae-Chul 한국공업화학회 1992 공업화학 Vol.3 No.4
The synthesis of epichlorohydrin was carried out by the epoxidation of allyl chloride with tert-butyl hydroperoxide(TBHP) over silica supported molybdenum catalyst. Kinetic study was performed at $60-80^{\circ}C$ and 10 atm with the molar ratio of TBHP/Allyl chloride between 0.01 and 0.1 in a batch reactor. The epoxidation of allyl chloride was inhibited by tert-butyl alcohol and kinetic data could be represented by Michaelis-Meten type rate equation. The reaction mechanism could be explained by the combination of reversible adsorption of TBHP and tert-butyl alcohol accompanied by reaction of allyl chloride with TBHP adsorbed on $Mo/SiO_2$ catalyst. t-Butyl hydroperoxide(TBHP)에 의한 염화알릴의 에폭시화에 의해서 에피클로로히드린을 합성하는데 실리카에 담지된 몰리브데늄 촉매를 사용하였다. 속도론적 연구는 회분 반응기를 사용하여 $60-80^{\circ}C$, 10기압에서 TBHP/염화알릴의 농도비를 0.01-0.1의 범위내에서 수행하였다. t-butyl alcohol(TBA)에 의해서 염화알릴의 에폭시화 반응이 억제되었고, 반응속도는 Michaelis-Menten 형태의 속도식으로 표현할 수 있었다. 반응기구는 TBHP와 TBA의 가역흡착과 $Mo/SiO_2$에 흡착된 TBHP와 염화알릴의 표면반응으로 설명할 수 있었다.