http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
삼상 양방향 교류 전압 제어기를 이용한 호이스트용 통합 드라이브 시스템에 관한 연구
라병훈,이종률,이현우 慶南大學校 附設 工業技術硏究所 2002 硏究論文集 Vol.20 No.-
기존의 호이스트용 드라이브 시스템은 호이스팅, 주행, 횡행운전의 제어에 있어 각각 별개의 드라이브 장치를 사용하고 있어서 과다한 중량으로 에너지 손실이 많다. 또한 전원회로는 유접점 릴레이 방식으로 작업환경의 악조건으로 진동에 의한 이탈사고 등이 빈번하여 안전사고의 위험성이 있으며, 유지보수가 빈번한 문제점을 가지고 있었다. 이러한 문제점을 해결하기 위하여 본 연구에서는 호이스트용 드라이브 시스템에 있어 각 운전별 전원장치, 제어 및 드라이브, 유틸리티 전원 등을 하나의 장치로 통합하였다. 전원회로는 전력용 반도체 스위칭 소자인 다이리스터를 삼상 양방향 교류 전압제어기 회로를 적용하여 무접점 회로화하여 하나의 통합 시스템을 제공한다. An existent hoist drive system is using each different drive equipment in control of hoisting, traveling(T/L), traversing(T/S) driving, so there are much energy losses because of excessive weight. Also, power circuits are using relay contact, so working environment are frequent secession accident etc.. by shock on unfavorable condition, and there is danger of safety accident, maintenance has frequent problem and so on. To solve these problem, it is integrated each driving power supply in drive system for hoist, control and drive, utility power supply etc.. by single device in this research. The power circuit is consisted of non-contact circuit applying to bidirectional voltage controller circuit using thyristor that is power semiconductor switching device.
라병훈,고강훈,박성우,김준홍,이현우 경남대학교 신소재연구소 1998 論文集 Vol.10 No.-
본 논문은 용접기용 전원장치의 도전손실 저감에 관하여 제안하고 있다. 최근, 산업용 기기의 전원장치에 많이 적용되고 있는 소프트 스위칭 방식에는 모두가 일장일단이 있다. 대용량의 용접기용 전원장치로 주로 사용되는 기존의 Phsae-Shifted FB DC-DC 컨버터는 고주파 변압기의 동손과 고주파 변압기의 누설에너지와 순환전류의 증가로 인한 1차단의 브릿지의 주 스위칭 소자의 도전손실의 문제점들을 가지고 있다. 이러한 도전손실의 문제점을 보완하기 위하여 본 논문에서는 FB DC-DC 컨버터의 새로운 토폴로지를 제안하고 시뮬레이션하였다. This paper proposed that reducing conduction losses on power supply for welding machine. Recently, all the Soft-Switching method has both merits and demerits. to aadapted industrial machines' power supply. The conventional Phase-Shifted FB DC-DC converter that used power supply for welding machine primarily, have problems that the copper loss in the high frequency transformer and conduction losses of bridge main switching device in the 1st terms, because of the leakage energy in the high frequency transformer and inducing of circulating current. To improved this demarit, this paper suggested and simulated a new topology of Phase-Shifted FB PWM DC-DC converter. - To minimized a circulating current.
아날로그 적분기를 이용한 맥동전압 보상형 순시추종PWM 제어기를 적용한 인버터
라병훈,이현우,김광태 전력전자학회 2004 전력전자학회 논문지 Vol.9 No.4
In this paper, it is suggested that instantaneous compensation PWM control for inverter without the smoothing capacitor Therefore, this inverter system has several advantages. It has small volume and low price to manufacture, decrease trouble rate of inverter, and has power factor correction effect because huge smoothing capacitor-less. And it has compact size control circuit to use analog integrator device. It could make the smoothing capacitor-less inverter for air-blower motor by using the instantaneous compensation PWM controller. This inverter system has small volume and value compare with the conventional VVVF control inverter 본 논문에서는 입력단 커패시터를 제거한 인버터의 제어에 아날로그 적분기를 이용한 새로운 비선형 제어 기법인 순시보상형 PWM 제어회로를 적용하고 있다. 비선형 순시보상형 PWM 제어기는 순시 입력전압의 변동에 대한 보상과 제어기준값에 대한 추종이 스위칭 한 주기 내에서 이루어지는 다이나믹하고 강인한 응답성을 가지고 있으며, 아날로그 소자를 사용하고 있어 제어회로가 간단하며, 인버터 입력 맥동전압을 보상함으로 대형의 평활용 커패시터가 필요치 않아서 소형, 저가형으로 부피가 적은 인버터를 제작 할 수 있다는 장점을 가지고 있다. 이러한 장점을 가지고 있는 순시보상형 PWM 제어 인버터를 기존의 VVVF 제어형 전동기 인버터 시스템을 대치하여 저가이고 소형의 인버터 시스템으로 제안하고 실험을 통하여 우수한 동작특성을 확인하고 있다.
라병훈(B.H.Ra),이현우(H.W.Lee),김상돈(S.D.Kim),김광태(K.T.Kim) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(1)
A new non linear, mean value, Instantaneous following control technique to design half bridge converter is proposed In witch control principle uses characteristic that reset time of analog Integrator is inverse proportion In Input voltage. It IS Important characteristic that compensation and follow-up control time are same with switching frequency. Is completed In one cycle that base control frequency. Have excellence characteristic that follow In order Instruction value exactly stationary state as well as transient state. Half bridge converter that apply this control principle can know that have stabilize and excellence characteristic This technique is verified through an experiment, and know that experiment result and theory agree well.
풀브리지 DC-DC 컨버터의 도전손실과 스위칭 스트레스를 저감한 전원장치 개발
라병훈(Byung-Hun Ra),송대현(Dae-Hyun Song),김광태(Kwang-Tae Rim),이현우(Hyun-Woo Lee) 전력전자학회 2001 전력전자학술대회 논문집 Vol.2001 No.7
This paper is indicating the problems, which are the conduction loss on the high frequency transformer, the protection of rectification diode as the snubber loss and the stress of switching main devices, as be made high current and high speed in the phase-shift switching full-bridge DC-DC converter is used the power supply's main circuit of high capacity. In this paper, to improve those problems, it is proposed that is the resonant circuit auxiliary can be reduced conduction losses and stabilized output control. And, it is constructed prototype of the power supply as the result of computer simulations.
라병훈(B.H.Ra),권순걸(S.K.Kwon),이현우(H.W.Lee),전중함(J.H.Chun),김광태(K.T.Kim) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.11
Conventional vector control inverter is usually used for blower of air-accord equipment. In this paper, it is proposed that inverter is controlled by instantaneous following PWM controller. This controller compensate and follow for output voltage of inverter within one switching cycle as an error that compared output voltage of rectifier included much ripples with reference voltage of sine wave. It has not speedy response like vector controller, but the circuit is very simple as using analog integer. And it has advantages that develop input power factor, built<br/> small-capacity and low-cost because huge capacitor of voltage type inverter removed.