석재가공용 다이아몬드 톱의 제조 및 특성

이현우,전우용,이오연,설경원,Lee Hyun-Woo,Jeon Woo-yong,Lee Oh-yeon,Seol Kyeong-won 한국분말야금학회 2004 한국분말재료학회지 (KPMI) Vol.11 No.5

The purpose of the present study is to determine an optimum composition using cheaper powders keeping with high performance of hard rock cutting diamond saw blade. With 50Fe-20(Cu . Sn)-30Co specimen, a part of Co was replaced by Ni(5%, 10%, and 15%, respectively). These specimens were hot pressed and sintered for predetermined time at various temperature. Sintering is performed by two different methods of temperature controlled method and specimen dimension controlled method. In order to determine the property of the sintered diamond saw blade, 3 point bending tester, X-ray diffractometer, and SEM were used. As the Co in the bond alloy was replaced by Ni, the hardness of the specimen increased. Thus the 50Fe-20(CuㆍSn)-15Co-15Ni specimen showed the maximum hardness of 104(HRB). The results of 3 point bending test showed that flexure strength decreased along with increase in Ni content. This is attributed to the formation of intermetallic compound(Ni$_{x}$Sn) determined by X-ray diffraction. The fracture surface after 3 point bending test showed that diamond was fractured in the specimen containing 0%, 5%, and 10%Ni, and the fracture occurred at the interface between diamond and matrix in the specimen containing 15%Ni. The cutting ability test showed that the abrasive property was not changed in the specimen containing 0%, 5%, and 10%Ni. The optimum composition determined in this study is 50Fe-20(CuㆍSn)-20Co-10Ni.

관상동맥우회 이식편으로서의 우위대망동맥의 조직학적 특징

이현우,송현,유동곤,임한중,이재원,송명근,Lee, Hyun-Woo,Song, Hyun,Yoo, Dong-Gon,Lim, Han-Jung,Lee, Jae-Won,Song, Meong-Gun 대한흉부심장혈관외과학회 1999 Journal of Chest Surgery Vol.32 No.10

Long term patency of arterial graft has been better than venous graft and redo coronary artery bypass grafting has been increasing, therefore, there has been an increasing need for alternative arterial grafts except internal thoracic artery(ITA). Material and Method: Right gastroepiploic arteries(RGEA) were harvested from 100 patients who had received gastrectomy for gastric cancer or ulcer. ITAs were obtained from 10 patients undergoing coronary artery bypass grafting. The length of RGEA was measured from the pyloric ring. Items of the morphometric and histologic study at the pyloric ring and sites of the 10cm and 20cm RGEA from the pyloric ring were luminal diameter, intimal thickness, medial thickness, wall thickness, degree of intimal hyperplasia, intimal thickness, medial thickness, wall thickness, degree of intimal hyperplasia, intimal thickness index, medial thickness index, and the number of discontinuities of the internal elastic lamina. Similar items were applied to the proximal site of ITAs. Result: The length of RGEA was 23${\pm}$2.7cm(range 17∼31cm). Comparing the 20cm RGEA with ITA, intimal thickness, medial thickness, wall thickness, and degree of intimal hyperplasia did not show any difference(p>0.05). However, 20cm RGEA was greater than ITA at the luminal diameter, intimal thickness index, and the number thickness and wall thickness in each site of the RGEA(pyloric ring, 10cm, 20cm) decreased from the pyloric ring to the distal sites(p<0.05). The degree of intimal hyperplasia and the number of discontinuities of the internal elastic lamina did not show any difference between the pyloric ring and 10cm, however, those of 20cm were smaller than these sites(p<0.05). RGEA had more number of discontinuities of the internal elastic lamina and rich smooth muscle cells in the media than ITA. Conclusion: The length and diameter of RGEA is good enough to reach most of the coronary arteries. Moreover, long term patency of RGEA may be improved, if anastomosed in the distal site.

측창 및 온실 폭이 자연환기 성능에 미치는 영향

이현우,우영회,이종원,Hyun Woo Lee,Young Hoe Woo,Jong Won Lee 국립한국농수산대학교 교육개발센터 2023 현장농수산연구지 Vol.25 No.1

In summer, the natural ventilation performance for varying greenhouse width is very important in the glasshouses for year round cultivation. The effect of the side openings and greenhouse width on natural ventilation performance was analyzed by simulation. The necessary ventilation rate with different solar radiation transmittance increased significantly when the outside temperature grows higher. The necessary ventilation rate of 40% transmittance was about half of that of 90% transmittance. In consequence, shading effect on temperature control in greenhouse is significant in summer. When the total area of the openings for ventilation is constant, the maximum ventilation rate happens when the area of roof openings is equal to the area of side openings. This maximum ventilation rate is about 3 times of that of the greenhouse with roof openings and without side openings. Therefore, the side openings are advantageous to improve the natural ventilation in greenhouses. As the greenhouse width increases, the influence of side openings on the ventilation rate is becoming smaller. If the natural ventilation rate of the greenhouse with roof and side openings is to become double of that of the roof openings only, the width should be narrower than 38.4m for the Venlo type and 64m for Wide span type.

서초동(서울시 서초구)의 거미상

김주필(Joo Pil Kim),정혜리(Hye ri Jeong),김대희(Dae Hee Kim),박동우(Dong Woo Park),서재웅(Jae Woong Seo),이현우(Hyun woo Lee) 한국거미연구소 2017 한국거미 Vol.33 No.1

2016년 3월 31일부터 7월 31일까지 서울특별시 서초구 서초동에 위치한 서울고등학교 교정 일대를 서울고등학교 환경생물부 부원들이 채집 조사한 결과 20과 43속 53종의 거미가 조사 연구되어 이에 보고하는 바이다. From March 31st to July 31st in 2016, members of an environmental biology club at Seoul High School located in Seocho-gu, Seoul, Dae-Hee Kim, Dong-Woo Park, Jae-Woong Seo and Hyun-woo Lee, collected 20 families 43 genera 53 species of spiders and report the result of the study here.

영상처리기법을 이용한 CCT 시편 균열의 자동관측법에 관한 연구

이현우,문기태,오세종,정병우,Lee, Hyun-Woo,Mun, Gi-Tae,Oh, Se-Jong,Jeong, Byung-Woo 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.3

In the analysis of fatigue crack propagation behavior, the crack length is one of the most important factors. In the test of crack propagation, compliance method is widely used to detect crack length. The measurement of surface crack length is not so easy with compliance method. In this study, the image processing technique was applied to measure the surface crack length. CCD(Charge-coupled device) camera was used to observe the crack image and the computer program to detect crack length from stored crack image was developed. CCT(Center Cracked Tension) specimen was used to compare the compliance method with the image processing technique. The crack length which detected by the image processing techniques was found to be well consistent with that from the optical measurement.

영상처리기법을 이용한 CCT 시편 균열의 자동관측법에 관한 연구

이현우,문기태,오세종,정병우,Lee, Hyun-Woo,Mun, Gi-Tae,Oh, Se-Jong,Jeong, Byung-Woo 대한기계학회 1997 대한기계학회논문집 Vol.21 No.3

In the analysis of fatigue crack propagation behavior, the crack length is one of the most important factors. In the test of crack propagation, compliance method is widely used to detect crack length. The measurement of surface crack length is not so easy with compliance method. In this study, the image processing technique was applied to measure the surface crack length. CCD(Charge-coupled device) camera was used to observe the crack image and the computer program to detect crack length from stored crack image was developed. CCT(Center Cracked Tension) specimen was used to compare the compliance method with the image processing technique. The crack length which detected by the image processing techniques was found to be well consistent with that from the optical measurement.

정보숨김과 주변 움직임 벡터의 적응적 선택에 의한 에러은닉 알고리즘의 설계 및 구현

이현우,성동수,이건배,Lee, Hyun-Woo,Seong, Dong-Su,Lee, Keon-Bae 한국정보처리학회 2006 정보처리학회논문지B Vol.13 No.6

본 논문에서는, 복합 에러은닉 알고리즘을 이용하는 비디오 코더를 제안한다. 알고리즘은 먼저 정보숨김을 적용하여 손실된 블록의 움직임 벡터를 복원한다. 만일 은닉정보가 손실된 경우 손실된 블록의 움직임 벡터는 주위 정상 블록들의 움직임 벡터들의 적응적 선택을 이용하여, 손실된 블록의 새로운 움직임 벡터로 할당하고, OBMC (Overlapped Block Motion Compensation)를 통해 최종적으로 손실영역을 은닉하게 된다. 이 방법은 연속된 GOB의 손실에 있어서 좀 더 효과적임을 알 수 있었다. 실험 결과 제안한 방법의 결과가 정보숨김만을 이용하거나. 주변 움직임 벡터만을 이용하는 기존의 방법에 비하여 향상된 결과를 얻을 수 있음을 알 수 있었다. In this paper, we propose an error resilience video coder which uses a hybrid error concealment algorithm. Firstly, the algorithm uses the error concealment with data hiding. If the hiding information is lost, the motion vector of lost macroblock is computed with adaptive selection of adjacent motion vectors and OBMC (Overlapped Block Motion Compensation) is applied with this motion vector. We know our algorithm is more effective in case of continuous GOB. The results show more significant improvement than many temporal concealment methods such as MVRI (Motion Vector Rational Interpolation) or existing error concealment using data hiding.

소형화된 1.6 GHz 단일 채널 도플러 센서를 이용한 실시간 호흡 및 심장 박동 감지기

이현우,박일호,김동욱,Lee, Hyun-Woo,Park, Il-Ho,Kim, Dong-Wook 한국전자파학회 2007 한국전자파학회논문지 Vol.18 No.4

This paper presents a real-time respiration and heartbeat detector comprised of a 1.6 GHz single-channel Doppler sensor and analog/digital signal processing block for remote vital sign detection. The RF front end of the Doppler sensor consists of an oscillator, mixer, low noise amplifier, branch-line hybrid and patch antenna. We apply artificial transmission lines(ATLs) to the branch-line hybrid, which leads to a size reduction of 40 % in the hybrid, while its performance is very comparable to that of a conventional hybrid. The analog signal conditioning block is implemented using second order Sallen-Key active filters and the digital signal processing block is realized with a LabVIEW program on a computer. The respiration and heartbeat detection is demonstrated at a distance of 50 cm using the developed system.

이열 하악관(Bifid Mandibular Canal): 방사선적 소견과 임상적 의의 -증례보고-

이현우,김여갑,이백수,권용대,최병준,김영란,Lee, Hyun-Woo,Kim, Yeo-Gab,Lee, Baek-Soo,kwon, Yong-Dae,Choi, Byung-Jun,Kim, Young-Ran 대한치과마취과학회 2009 Journal of Dental Anesthesia and Pain Medicine Vol.9 No.1

When performing the inferior alveolar nerve block anesthesia, surgeon often faced a difficulty of the surgical operation due to the incomplete anesthesia. One of the reason is the variety of mandibular canal anatomy. Up to now, there are some reports of index cases about bifid mandibular canal among mandibular canal anatomic variation, and some classification is applied according to anatomical location and configuration. When surgical operation is performed involving mandible such as dantal implant treatment, extraction of an impacted third molar, sagittal split ramus osteotomy, etc, the position of mandibular canal should be considered. Bifid mandibular canal clinically causes troublesome cases of anesthesia when inferior alvelor nerve block, especially is performed extraction of an impacted third molar. Therefore, It is important for clinicians to recognize the presence of bifid canals on radiographys. Nowadays, the position of mandibular canal can be measured precisely by using Dental CT. It is not found by panorama image but is found by Dental CT sometimes. Among the patients, which take panorama and Dental CT simultaneously, for tooth extraction of lower impacted third molar in our department, we report the case that did not identifying in panorama but identifying it in Dental CT.

주변 움직임 벡터의 적응적 선택을 이용한 효율적인 에러은닉 알고리즘

이현우,성동수,Lee Hyun-Woo,Seong Dong-Su 한국정보처리학회 2004 정보처리학회논문지B Vol.11 No.6

통신 기술의 발전으로 무선 채널을 이용한 멀티미디어 서비스를 제공하기 위한 방법이 활발히 연구되고 있다. 이에 따라 최근 무선망이나 인터넷과 같이 오류가 많이 발생하는 채널을 통한 비디오의 전송이 급격히 증가하면서 채널 상에서 발생하는 전송에러로 인한 데이터의 손실이 심각한 문제로 대두되고 있으며, 이에 따라 에러 은닉이 주된 관심사로 부각되었다. 에러 은닉 기법은 부가 정보가 필요 없으며, 부호화 기법의 변형 없이 적용이 가능하기 때문에 널리 연구되고 있다. 본 논문에서는, 손실된 블록 주위의 정상블록들 중 움직임 벡터들의 적응적 선택을 이용하여 중간 값을 취한 후, 손실된 블록의 새로운 움직임 벡터로 할당하고, OBMC(Overlapped Block Motion Compensation)을 통해 최종적으로 손실영역을 은닉하게 된다. 이 방법은 연속된 GOB(Group Of Block)의 손실에 있어서 효과적임을 알 수 있었다. 실험 결과 PSNR 성능평가 면에서 제안한 방법의 결과가 기존의 방법들 중 우수한 에러은닉 결과를 내는 MVRI(Motion Vector Rational Interpolation)이나 메디안$.$중첩 에러 은닉 기법에 비해 약 3db정도 향상된 결과를 얻을 수 있었다. In the wireless communication systems, transmission errors degrade the reconstructed image quality severely. Error concealment in video communication is becoming increasingly important because transmission errors can cause single or multiple loss of macroblocks in video delivery over unreliable channels such as wireless networks and internet. Among various techniques which can reduce the degradation of video quality, the error concealment techniques yield good performance without overheads and the modification of the encoder. In this paper, lost image blocks can be concealed with the OBMC(Overlapped Block Motion Compensation) after new motion vectors of the lost image blocks are allocated by median values using the adaptive selection with motion vectors of adjacent blocks. We know our algorithm is more effective in case of continuous GOB loss. The results show a significant improvement over the zero motion error concealment and other temporal concealment methods such as Motion Vector Rational Interpolation or Median+OBMC by 3dB gain in PSNR.