http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
BIM기반의 브레이스 접합부의 구조설계 인터페이스 모듈 개발
김태형,신태송,Kim, Tae Hyeong,Shin, Tae Song 한국강구조학회 2013 韓國鋼構造學會 論文集 Vol.25 No.2
본 연구는 강구조물의 실시설계 단계에서 브레이스 접합부의 구조설계 및 BIM 모델링의 효율성을 제고하기 위한 것으로 브레이스 접합부의 구조설계 인터페이스 모듈 개발을 목적으로 한다. 이를 위하여 국내 외의 구조설계기준을 분석하여 알고리즘을 작성하고 이를 바탕으로 구조설계모듈을 구축하였다. 또한 BIM 설계 도구와 연동하여 모델 데이터로부터 구조설계를 수행하기 위한 입 출력 데이터를 자동으로 생성하며, 구조설계 결과로부터 BIM 모델을 자동으로 생성할 수 있는 인터페이스 모듈을 개발하였다. 예제 모델을 통해 개발된 모듈의 효율성과 실용성을 검증하였다. This study is aimed at developing the structural design interface module for the brace connections in order to improve the efficiency of the interoperability between structural design and BIM modeling at the construction design phase of steel structures. For this purpose, structural design module is first established according to the algorithm built by structural design standards of domestic and foreign. Then, it is developed interface module which can export the data of 3D model obtained from the BIM design tools to structural design module and feed structural design results back to 3D BIM model. Finally, the efficiency and practicality of the developed interface module is verified by applying to a sample model.
김태형,Kim, Tae-Hyeong 벤처기업협회 2006 벤처다이제스트 Vol.101 No.-
불과 몇 년 전까지도 우리에게 캐나다는 미국의 인접국일 뿐이었다. 하지만 9.11 이후 캐나다는 전 세계적으로 미국을 대체하는 경제권으로 등장했다. 특히 서부 캐나다의 경우, 수많은 아시아권 이민 및 교육 인프라를 통해 아시아권에 가장 친숙한 지역으로 변화하고 있다. 이같이 아시아를 통해 문을 열고 있는 캐나다의 일반산업 세부 현황과 유망진출분야를 공략하는 전략을 모색해본다.
Standard Exact Couch와 6D Robotic Couch를 이용한 광자선의 조사각에 따른 선량 감쇠에 대한 연구
김태형,오세안,예지원,박재원,김성규,Kim, Tae Hyeong,Oh, Se An,Yea, Ji Woon,Park, Jae Won,Kim, Sung Kyu 한국의학물리학회 2016 의학물리 Vol.27 No.2
본 연구는 방사선치료에서 방사선 선량전달의 정확도를 높이기 위해 두 종류의 치료테이블 6D robotic couch (BrainLab, Feldkirchen, Germany)와 Standard exact couch (Varian Exact couch$^{TM}$, Varian Medical Systems, Milpitas, CA, USA)를 이용하여 Rail의 위상(In-Out)에 따른 상대선량을 측정하여, 선량감쇠율을 계산하였다. 치료테이블을 투과하는 조사에너지의 조사각 $0^{\circ}$에서 $360^{\circ}$까지의 상대 선량을 각각 측정하였으며, 조사각이 $0^{\circ}$일 때 측정된 선량을 기준으로 하여 $5^{\circ}$ 간격으로 선량의 변화를 측정하고 선량 감쇠율을 계산하였다. Standard exact couch의 광자선 에너지는 6 MV와 10 MV를 사용하였으며 치료테이블의 Rail 위상(In position, Out position)에 따른 상대 선량을 측정하였다. 6D robotic couch는 6 MV와 15 MV의 광자선 에너지를 사용하였다. Standard exact couch의 광자선의 최대 선량차이는 Rail In position에서 6 MV ($175^{\circ}$), 10 MV ($175^{\circ}$)일 때, 선량차이는 각각 16.53%, 12.42%, Out position에서 6 MV ($225^{\circ}$), 10 MV ($225^{\circ}$)일 때, 선량차이는 각각 15.15%, 9.96%였다. 6D robotic couch에서는 6 MV ($130^{\circ}$)와 15 MV ($130^{\circ}$)일 때, 선량차이는 각각 6.82%, 4.92%였다. 본 연구를 통해, 치료테이블의 종류에 따른 선량 감쇠율은 6D robotic couch가 Standard exact couch보다 6 MV에서 조사각 $180^{\circ}$ 기준 약 1% 더 발생함을 확인하였고, Stnadard exact couch인 경우, Sliding rail의 위상(In position, Out position)에 따라 선량 감쇠가 급격히 변화하는 것을 확인하였다. The objective of this study is to increase the accuracy of dose transmission in radiation therapy using two types of treatment tables, standard exact couch (Varian 21EX, Varian Medical Systems, Milpitas, CA) and 6D robotic couch (Novalis, BrainLAB A.G., Heimstetten, Germany)). We examined the dose attenuation based on the two types of treatment tables and studied the dose of attenuation using the phase (In/Out) for the standard exact couch. We measured the relative dose according to the incident angle of a penetrative photon beam under a treatment table. The incident angle of the photon beam was from $0^{\circ}$ to $360^{\circ}$ in the increments of $5^{\circ}$. The reference angle was set to $0^{\circ}$. Furthermore, the relative dose of the 6D robotic couch was measured using 6 MV and 15 MV, and that of the standard exact couch was measured at the sliding rail position (In-Out) using 6 MV and 10 MV. In the case of the standard exact couch, the measured relative dose was 16.53% (rails at the "In position," $175^{\circ}$, 6 MV), 12.42% (rails at the "In position," $175^{\circ}$, 10 MV), 13.13% (rails at the "Out position," $175^{\circ}$, 6 MV), and 9.96% (rails at the "Out position," $175^{\circ}$, 10 MV). In the case of the 6D robotic couch, the measured relative dose was 6.82% ($130^{\circ}$, 6 MV) and 4.92% ($130^{\circ}$, 15 MV). The photon energies were surveyed at the same incident angle. The dose attenuation for an energy of 10 MV was 4~5% lower than that for 6 MV. This indicated that the higher photon energy, lesser is the attenuation. The results of this study indicated that the attenuation rate for the 6D robotic couch was confirmed to be 1% larger than that for the standard exact couch at 6 MV and $180^{\circ}$. In the case of the standard exact couch, the dose attenuation was found to change rapidly in accordance with the phase ("In position" and "Out position") of the sliding rail.
김태형,김병민,최재찬,Kim, Tae-Hyeong,Kim, Byeong-Min,Choi, Jae-Chan 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.10
In cold forming processes, due to high working pressure action on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. Die wear affects the tolerances of formed parts, metal flow and costs of process etc. The only way to control these failures into devlop methods which allow prediction of die wear and which are suited to be used in the design state in order to optimize the process. In this paper, the forming propcesses that involve cold forward extrusion and wire drawing were simulated by rigid plastic finite element method and its output were used for predicting die wear by Archard wear model. The simulation results were compared with the measured worn dies.