Two New Species of Poecilostomatoid Copepods Associated with the Bivalve Dosinella penicillata in the Yellow Sea

김일호,Kim, Il-Hoi The Korean Society for Integrative Biology 1997 Korean journal of biological sciences Vol.1 No.1

Two new species of poecilostomatoid copepods, each belonging to the genera Myicola (Myicolidae) and Conchyliurus (Clausidiidae), are described, based on specimens taken from the mantle cavity of the bivalve Dosinella penicillata (Reeve). The host bivalve was collected from the intertidal mud flat near Inchon in the Yellow Sea.

MA법으로 제조된 Ni기 합금에서 Y₂O₃ 첨가에 따른 인장강도변화와 시효처리 효과

김일호,이원식,고세현,장진만,권숙인,Kim, Il-Ho,Lee, Won-Sik,Ko, Se-Hyun,Jang, Jin-Man,Kwun, Sook-In 한국분말야금학회 2008 한국분말재료학회지 (KPMI) Vol.15 No.1

Ni-20Cr-20Fe-5Nb alloy with or without $Y_2O_3$ was manufactured by mechanical alloying process and consolidated by spark plasma sintering (SPS). The grain size of the alloy with $Y_2O_3$ was smaller than that of alloy without $Y_2O_3$ which results from the effect of $Y_2O_3$ suppressing grain growth. The tensile strength at room temperature was increased by the addition of $Y_2O_3$ but decreased abruptly at temperature above $600^{\circ}C$. It seems to result from the change of deformation mechanism due to fine grain size, that is, grain boundary sliding is predominant at above $600^{\circ}C$ while internal dislocation movement is predominant at below $600^{\circ}C$. After conventional heat treatment process of solution treatment and aging, a small amount of ${\delta}(Ni_3Nb)$ phase was formed in Ni-20Cr-20Fe-5Nb alloy while a large amount of ${\gamma}"(Ni_3Nb)$ was formed in Inconel 718 in the previous report. This is due to exhaustion of Nb content by the formation of NbC during consolidation.

$Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$계 박막형 열전발전 소자의 제작과 작동 특성

김일호,장경욱,Kim Il-Ho,Jang Kyung-Wook 한국진공학회 2006 Applied Science and Convergence Technology Vol.15 No.2

[ $Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$ ]계 박막형 열전발전 소자에 의해 volt 단위의 비교적 고전압에서 microwatt 수준의 출력을 발생시킬 수 있었다. 최대 출력은 온도차와 2차 함수적인 관계가 있었고, 주어진 온도차에서 판형 모듈의 적층수에 비례하여 증가하였다. 판형 모듈의 적층수와 직렬/병렬 연결 조합의 변화에 의해 출력 전압과 전류를 조절할 수 있었다. 온도차에 대한 개회로 전압과 폐회로 전류의 변화는 직선성을 보였다. 개회로 전압은 직렬 연결의 경우 판형 모듈의 수에 의존하였지만, 병렬 연결의 경우에는 의존하지 않았다. 반면, 폐회로 전류는 직렬연결의 경우 판형 모듈의 적층수와 무관하게 일정한 값을 나타내었고, 병렬 연결의 경우 판형 모듈의 적층수에 비례하여 증가하였다. Microwatt power level at relatively high voltage(order of volt) was produced by $Bi_{0.5}Sb_{1.5}Te_{3}/Bi_{2}Te_{2.4}Se_{0.6}$ thin film thermoelectric generators, and maximum output power varied with temperature difference in the square-law relation. Output voltage and current were possible to control by changing the way of electrical connection as well as the number of stacking plate-modules. Variation of open circuit voltage and short circuit current with temperature difference showed a linear relationship. There were, however, some differences in variations; open circuit voltage were dependent on the number of plate-module when connected in series, but it was not for parallel connection. On the other hand, short circuit current showed the opposite behavior to the case of open circuit current.

비정규직 근로가 건강에 미치는 영향

김일호,백도명,조성일,Kim, Il-Ho,Paek, Do-Myung,Cho, Sung-Il 대한예방의학회 2005 예방의학회지 Vol.38 No.3

Objectives : Job insecurity, such as non-standard work, is reported to have an adverse impact on health, regardless of health behaviors. The aim of this study was to examine the relationship between non-standard employment and health in Korea. Methods : We analyzed a representative weighted sample, which consisted of 2,112 men and 1,237 women, aged 15-64, from the 1998 Korea National Health and Nutrition Examination Survey. Non-standard employment included part-time permanent, short time temporary and daily workers. Self-reported health was used as a health indicator. Results : This study indicated that women were more likely to report poorer health than men with standard jobs. Of all employees, 20.3% were female manual workers. After adjusting for potential confounders, such as age, education, equivalent income, marital, social and self-reported economic status and health behavior factors, nonstandard employment was found to be significantly associated with poor health among female manual workers (OR, 1.86; 95% CI, 1.24 to 2.79). No significant association was found in other working groups Conclusions : Among female manual workers, nonstandard employees reported significantly poorer health compared with standard workers. This result raises concern as there are increasing numbers of non-standard workers, particularly females.

N형 $Bi_2Te_{2.4}Se_{0.6}$ 박막의 열전 특성에 미치는 두께 및 열처리 효과

김일호,장경욱,Kim Il-Ho,Jang Kyung-Wook 한국진공학회 2005 Applied Science and Convergence Technology Vol.14 No.3

순간 증착법으로 제조한 n형 $Bi_2Te_{2.4}Se_{0.6}$ 박막에 대하여 유효 평균 자유 행로 모델을 적용하여 박막의 두께가 열전 특성에 영향을 미치지 않는 임계 두께를 구하였다. 또한 열처리 전후 전자 농도 및 이동도의 변화를 조사하여 열처리에 의한 열전 특성의 변화를 역구조 결함과 관련하여 설명하였다. Seebeck 계수와 전기 비저항 모두 두레의 역수와 직선적인 관계를 보였으며, 이로부터 구한 평균 자유 행로는 $5120\AA$이었다. 열처리에 의해 전자의 이동도가 증가하였지만, 역구조 결함의 감소로 인해 운반자의 전자 농도가 현저히 감소하여, 결국 전기전도도가 감소하고 Seebeck 계수가 증가하였다 473k에서 1시간 동안 열처리한 Seebeck 계수와 전기전도도는 각각 $-200\;\mu V/k$와 $510\omega^{-1}cm^{-1}$이었다 또한, 열처리에 의해 열전 성능 인자가 상당히 향상되어 $20\times10^{-4}\;W/(mK^2)$를 나타내었다. The effective mean free path model was adopted to examine the thickness effect on the thermoelectric properties of flash-evaporated n-type $Bi_2Te_{2.4}Se_{0.6}$ thin films. Annealing effects on the electron concentration and mobility were also studied, and their variations were analyzed in conjunction with antisite defects. Seebeck coefficient and electrical resistivity versus inverse thickness showed a linear relationship, and the mean free path was found to be $5120\AA$ Electron mobility was increased by annealing treatment and electron concentration was decreased considerably due to reduction of antisite defects, so that electrical conductivity was decreased and Seebeck coefficient was increased. When annealed at 473k for 1 hour, Seebeck coefficient and electrical conductivity were $-200\;\mu V/k\;and\;510\omega^{-1}cm^{-1}$, respectively. Therefore, the thermoelectric power factor was improved to be $20\times10^{-4}\;W/(mK^2)$.

'직업을 통한 사회봉사만이 정화의 지름길'

김일호,Kim, Il-Ho 대한건축사협회 1984 建築士 Vol.1984 No.3

다임 추출물로 마리네이드한 염장고등어의 품질특성과 저장성 연구

김일호,김지응,강재희,Kim, Il Ho,Kim, Ji Eung,Kang, Jae-Hee 한국식품조리과학회 2012 한국식품조리과학회지 Vol.28 No.6

Although the mackerel is an excellent food, there are disadvantages of its own smell and its shelf-life. So this study aimed to examine the quality assessment, shelf-life and acceptability of mackerel marinated with different amounts of thyme extract through the salinity, pH, texture, change of color, and sensory evaluation for reducing the smell of it and improving the shelf-life and acceptability of it with the thyme of various physiologic activities. The salinity of mackerel marinated with different amounts of thyme was a lower 2% than that of the existing salted mackerel, 5%, when producing the salted mackerel in the experimental method of this study, reducing the intake of salt. The shelf life of the existing salted mackerel was up to 4 weeks, while that of the salted mackerel marinated with thyme extract was up to 5 weeks. The change in pH during storage showed that the salted mackerel marinated with thyme extract after 5 weeks were within the initial decomposition of dark-fleshed fishes, pH 6.2-6.4, which the shelf life was extended due to the preservative effect of antioxidant content. The acceptability test showed that T 1 marinated with 1% thyme extract was ideal in all flavor, taste and general acceptability.

고순도 나이오븀과 탄탈륨 희유금속의 물리적 특성평가

김일호,박종범,유신욱,조경원,최국선,서창열,김병규,김준수,Kim Il-Ho,Park Jong-Bum,You Sin-Wook,Cho Kyung-Won,Choi Good-Sun,Suh Chang-Youl,Kim Byoung-Gyu,Kim Joon-Soo 한국재료학회 2005 한국재료학회지 Vol.15 No.4

Thermal, electrical and mechanical properties of high purity niobium and tantalum refractory rare metals were investigated tn evaluate the physical purity. Higher purity niobium and tantalum metals showed lower hardness due to smaller solution hardening effect. Temperature dependence of electrical resistivity showed a typical metallic behavior. Remarkable decrease in electrical resistivity was observed for a high purity specimen at low temperature. However, thermal conductivity increased for a high purity specimen, and abrupt increase in thermal conductivity was observed at very low temperature, indicating typical temperature dependence of thermal conductivity for high purity metals. It can be known that reduction of electron-phonon scattering leads to increase in thermal conductivity of high purity niobium and tantalum metals at low temperature.

고/액 계면에서의 Peltier 열 측정 및 결정성장에의 응용 I : 이론적 접근

김일호,장경욱,이동희,Kim, Il-Ho,Jang, Gyeong-Uk,Lee, Dong-Hui 한국재료학회 1999 한국재료학회지 Vol.9 No.11

결정성장 도중 전류에 의해 고/액 계면에서 발생하는 Peltier 열을 이용하면 온도구배의 증가와 이에 따른 성장속도의 증가 및 결정성의 향상에 기여할 것이라 예상되어, 고/액 계면에서 복합적으로 발생하는 Peltier 효과를 조사하였다. 전류 밀도, 극성 및 온도구배의 변화에 따른 고상과 액상 및 그 계면에서의 온도변화로부터 이론적 추론에 의해 Peltier 열, Thomson 열 및 Joule 열만의 영향으로 분류할 수 있었고, 고상/액상 계에 대한 Peltier 계수 및 Thomson 계수도 구할 수 있었다. The Peltier heat absorbed or evolved at the solidiliquid interface in the unidirectional solidification process could contribute to the increase of temperature gradient in liquid and growth velocity, and the enhancement of crystal orientation. In this study, in order to measure the Peltier heat generated at the solidiliquid interface as a way of application to crystal growth, the thermoelectric effects were investigated on the temperature changes at the solid- and liquid-phase of the same material and its interface. Through the theoretical consideration, it was possible to separate sole Peltier. Thomson or Joule heat from the temperature changes due to current density, polarity, and temperature gradient. Thomson coefficient of solid- and liquid-phase as well as Peltier coefficient at the solid/liquid interface could be obtained.

AlGaAs/GaAs HBT 에미터 전극용 Pd/Ge계 오믹 접촉

김일호,Kim, Il-Ho 한국재료학회 2003 한국재료학회지 Vol.13 No.7

Pd/Ge/Ti/Pt and Pd/Ge/Pd/Ti/Au ohmic contacts to n-type InGaAs were investigated for applications to AlGaAs/GaAs HBT emitter ohmic contacts. In the Pd/Ge/Ti/Pt ohmic contact minimum specific contact resistivity of $3.7${\times}$10^{-6}$ $\Omega$$\textrm{cm}^2$ was achieved by rapid thermal annealing at $^400{\circ}C$/10 sec. In the Pd/Ge/Ti/Au ohmic contact, minimum specific contact resistivity of $1.1${\times}$10^{-6}$ $\Omega$$\textrm{cm}^2$ was achieved by annealing at 40$0^{\circ}C$/10 sec but the ohmic performance was degraded with increasing annealing temperature due to the reaction between the ohmic contact materials and the InGaAs substrate. However, non-spiking planar interface and relatively good ohmic contact (high-$10^{-6}$ /$\Omega$$\textrm{cm}^2$) were maintained after annealing at $450^{\circ}C$/10 sec. Therefore, these thermally stable ohmic contact systems are promising candidates for compound semiconductor devices. RF performance of the AlGaAs/GaAs HBT was also examined by employing the Pd/Ge/Ti/Pt and Pd/Ge/Pd/Ti/Au systems as emitter ohmic contacts. Cutoff frequencies were 63.5 ㎓ and 65.0 ㎓, respectively, and maximum oscillation frequencies were 50.5 ㎓ and 51.3 ㎓, respectively, indicating very successful high frequency operations.