RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
          펼치기
        • 등재정보
          펼치기
        • 학술지명
          펼치기
        • 주제분류
          펼치기
        • 발행연도
          펼치기
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        냉과 간헐적 압박이 실험적 지연발생 근육통에 미치는 영향

        김승준,김용남,이근희,이인실,김병조,배성수,Kim, Seung-Joon,Kim, Yong-Nam,Lee, Keun-Heui,Lee, In-Sil,Kim, Byung-Jo,Bae, Sung-Soo 대한물리치료학회 2001 대한물리치료학회지 Vol.13 No.3

        Delayed onset muscle soreness (DOMS) was the sensation of discomfort and stiffness in the muscle, often after taking part in unaccustomed physical activity. No universally accepted treatment exist. The aim of this study was to examine the influence of cryotherapy and intermittent compression on the delayed onset muscle soreness. Flexion elbow joint position and extension(Universal Goniometer). pain(Muscle Soreness Rating Scale) and mechanical pain threshold(Algometer) were measured before 30minutes DOMS was induced.The data were analyzed by measure of Mann-Whitney test and Kruskal-Wallis test. The result were as follow; 1. There were no significantly differences between groups or over time in relation to range of motion. 2. Muscle Soreness Rating was significantly high in cryotherapy and intermittent compression at 48, 72 hours after DOMS was induced(p<.05). 3. Mechanical pain threshold begin to increased at 24 hours and significantly in cryotherapy and intermittent compression groups at 48, 72 hours after DOMS was induced(p>.05). 4. A negative Correlation between muscle soreness rating scale and mechanical Pain threshold graphs at 24, 48, and 72 hours after exercise indicated in cryotherapy and intermittent compression groups.

      • KCI등재

        불규칙 파랑 중 해중 터널 계류선의 단기 피로 손상 분석

        김승준,원덕희,Kim, Seungjun,Won, Deok Hee 한국강구조학회 2017 韓國鋼構造學會 論文集 Vol.29 No.1

        부유식 구조물의 계류선의 설계는 강도뿐만 아니라 피로수명 측면에서도 검토가 반드시 요구된다. 일반적으로 계류선의 피로 설계에는 동적 응력을 야기하는 하중이 지배적인 영향을 미치게 된다. 즉, 파랑이 주요 설계 하중으로 고려가 된다. 본 연구에서는 불규칙 파랑에 대한 해중 터널 계류선의 피로 손상 특성에 대해 분석한다. 시간 이력 유체-구조 동역학 해석을 통해 특정 환경 하중에 대한 해중터널의 동적 운동 및 계류선에 발생하는 장력과 응력을 계산하고, Rainflow 집계법 및 Palmgren-Miner의 법칙 그리고 DNV 기준에서 제시하는 해양구조물 설계를 위한 S-N 곡선을 고려하여 단기 피로 손상을 추정한다. 해중 터널의 계류 형식과 유사한 계류 형식을 갖는 인장각 플랫폼의 텐던 설계를 참고하여 100년 재현 주기 파랑이 48시간 지속되는 조건을 가정하여 이 환경 하중에 의한 피로 손상도를 추정한다. 본 해석 절차를 따르며, 함체의 흘수와 계류선의 간격 및 초기 기울임 각도가 피로 손상도에 미치는 영향을 분석한다. As well as the strength check, fatigue life check is also mainly required for designing mooring lines of the floating structures. In general, forces which induce dynamic structural response significantly affect to fatigue design of the mooring lines. So, waves are mainly considered as the governing loading for fatigue design of the mooring lines. In this study, characteristics of the fatigue damage of the mooring lines for submerged floating tunnels (SFT) under irregular waves are investigated. For this study time domain hydrodynamic analysis is used to obtain motion of the tunnel and tension and stresses of the mooring lines under the specific environmental conditions. Also, the Rainflow-counting method, the Palmgren-Miner's rule, and S-N curves for floating offshore structures presented by DNV recommendation is applied to calculate the fatigue damage due to the fluctuating stresses. Referring to the design plactice of the tendon pipes for TLP (tension-leg platform), which is very similar structural system to SFT, it is assumed that a 100 year return period wave attacks the SFT systems during 48 hours and the fatigue damages due to the environmental loading are calculated. Following the analysis sequence, the effects of the tunnel draft, spacing and initial inclination angle of the mooring lines on the fatigue damage under the specific environmental loadings are investigated.

      • KCI등재

        케이블 단선 후 강사장교의 구조 및 극한 거동 변화

        김승준,최준호,원덕희,한택희,강영종,Kim, Seung-Jun,Choi, Jun-Ho,Won, Deok-Hee,Han, Taek-Hee,Kang, Young-Jong 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.6

        본 논문에서는 강사장교의 케이블이 단선된 후 정역학적인 구조 거동 및 극한 거동 변화에 대해 기술한다. 사장교의 케이블은 화재, 차량의 충돌, 케이블 본선 및 정착구의 피로에 의해 단선이 가능하다. 이에 더하여 필요시 케이블의 교체 작업 시 일시적인 단선이 나타날 수 있다. 케이블이 구조물 본체에서 단락되면 결과적으로 케이블이 분담해야할 힘을 지지하지 못하여 이 힘은 다른 구조체로 전달되고 결과적으로 구조 상태의 변화가 발생한다. 그리고 케이블의 단선은 결국 구조물의 지지력의 손실을 의미하므로 케이블 단선 후 구조물의 내하력이 저하될 것이다. 본 연구에서는 엄밀한 비선형 유한요소해석 이론을 근간으로 하여 케이블 단선 후 구조물의 새로운 평형상태를 찾는 단선 해석기법을 제시한다. 그리고 케이블이 단선된 후 활하중에 대한 구조물의 극한거동을 해석할 수 있는 극한 해석 기법 역시 제시한다. 보다 합리적인 해석 연구를 위해 본 연구에서는 초기형상해석, 케이블 단선해석, 활하중에 대한 비선형해석을 순차적으로 수행하는 총 세단계의 해석 절차를 거친다. 본 해석기법을 이용하여 각 케이블의 단선이 사장교의 구조 상태 및 극한 거동의 변화에 미치는 영향을 분석하였다. This paper presents an investigation on the change in the statical behavior and the ultimate capacity of steel cable-stayed bridges after cable failure. Cable failure can occur due to fire, direct vehicle clash accidents, cable or anchorage fatigue, and so on. Moreover, the cable may be temporarily disconnected during cable replacement work. When cable failure occurs, the load, that was supported by the broken cable is first transferred to another cable. Then the structural state changes due to the interaction between the girder, mast, and cables. Moreover, it can be predicted that the ultimate capacity will decrease after cable failure, because of the loss of the support system. In this study, the analysis method is suggested to find the new equilibrium state after cable failure based on the theory of nonlinear finite element analysis. Moreover, the ultimate analysis method is also suggested to analyze the ultimate behavior of live loads after cable failure. For a more rational analysis, a three-step analysis procedure is suggested and used, which consisted of initial shape analysis, cable failure analysis, and live load analysis. Using this analysis method, an analytical study was performed to investigate the changes in the structural state and ultimate behavior of steel cable-stayed bridges.

      • KCI등재

        폐합 전 강사장교의 안정성 해석

        김승준,심경석,원덕희,조선규,강영종,Kim, Seung-Jun,Shim, Kyung-Suk,Won, Deok-Hee,Cho, Sun-Kyu,Kang, Young-Jong 한국강구조학회 2011 韓國鋼構造學會 論文集 Vol.23 No.1

        본 연구에서는 비선형 해석을 통하여 폐합 전 강사장교의 주요한 좌굴 거동 특성을 고찰한다. 케이블의 새그효과, 주탑과 거더의 P-${\Delta}$ 효과, 구조물의 대변위효과 등의 주요한 기하학적 비선형성을 모두 고려하기 위해 기하학적 비선형 해석으로써 구조물의 좌굴 해석을 수행하였다. 초기형상 해석 및 시공단계 해석을 통해 사하중을 받고 있는 시공 단계에 있는 구조물의 해석을 수행하였고 이 후 데릭 크레인과 키 세그먼트의 자중에 대한 비선형 해석으로 폐합 전 사장교의 좌굴 해석을 수행하였다. 본 해석 연구에서는 케이블의 배치 형태 및 주탑과 거더간 강성비에 따른 좌굴 모드 및 임계 하중계수의 변화를 분석하였다. 연구 결과 주요한 좌굴 모드를 구분하고 케이블 배치 형식이 다른 각 사장교에서 각 좌굴 모드가 나타나는 주탑과 거더간 강성비의 범위를 도출하였다. This paper presents an investigation of the structural stability of cable-stayed bridges in the construction stage, using geometric nonlinear finite-element analysis and considering various geometric nonlinearities, such as the sag effect of the cables, the P-${\Delta}$ effects of the girder and mast, and the large displacement effect. Initial shape analysis and construction-stage analysis were performed to determine the equilibrium of the structure in the construction stage. After that, geometric nonlinear analysis was performed to study structural stability. In this study, the weight of the derrick crane and the key segment were considered the main external loads, which were applied to the tip of the center span. The cable arrangement type and the stiffness ratios of the girder and mast were considered the main parameters of the analytic research. Based on the results of the analysis, the change in the buckling mode and critical load factors with respect to the cable arrangement type and the stiffness ratios of the girder and mast was investigated. The buckling modes of the steel cable-stayed bridges in the construction stage were classified, and the ranges of the stiffness ratios of the girder and mast, which show these classified buckling modes, were suggested.

      • A Survey of Physical Therapy Clinical Progress Note in Korea

        김승준,Kim, Seung-Joon The Korean Society of Physical Therapy 2005 대한물리치료학회지 Vol.17 No.4

        환자에 대한 기록은 일정한 형식을 가지고 환자 내원 초기부터 환자 및 의료진의 요구와 관리목적에 부합한 효과적인 평가, 치료계획, 치료적 중재를 수립할 수 있게 만드는 필수적인 일련의 상호관련학적 의사소통 도구임과 동시에 치료사가 환자관리에 포함된 사고 과정을 분석하는 데 도움을 주며 문제해결에 대한 사고를 체계화하는데 있어 중요한 역할을 한다. 본 연구의 목적은 물리치료사의 일반적 특성과 임상기록의 실태, 임상기록의 중요성을 인식하고 임상활동의 문제점을 개선하며 기록의 체계화를 이루어 임상기록의 활성화와 나아가 물리치료의 질적 향상과 물리치료 서비스에 대한 효율성을 높이는데 있다. 이 연구는 전국 의료기관이나 보건관련기관에서 근무하는 물리치료사를 선정하였다. 2005년 7월1일부터 8월30일 사이에 구조화된 설문지 320매를 직접 전달해 치료사가 작성한 설문지 314매를 직접 수거하였다. 분석 방법으로는 백분율과 빈도, Kuskal-Wallis Test. Pearson Chi-Square, Mann-Whitney U로 검정하였다. 잘못 표기한 응답자 1명을 제외한 응답자 총 313명 중 남자 142명 (45.2%), 여자 171명 (54.5%) 이었으며, 25세 이상 29세 이하 연령층이 119명 (37.9%)으로 가장 많이 분포하였다. 근무처에 따른 근무 개월, 일일 평균 환자수는 통계학적 검정으로 유의한 차이가 있는 것으로 나타났다(p<.05). 근무처에 따른 임상기록 작성에서도 통계학적 검정이 유의하였다(p<.05) 임상기록 작성이 효율적인 치료. 치료사 만족도에도 통계학적으로 유의한 결과가 나타났다(p<.05).

      • KCI등재

        사각 격자지보의 구조 성능 평가

        김승준,한금호,원덕희,백정식,강영종,Kim, Seung-Jun,Han, Keum-Ho,Won, Deok-Hee,Baek, Jung-Sik,Kang, Young-Jong 한국강구조학회 2012 韓國鋼構造學會 論文集 Vol.24 No.3

        본 논문은 신형식 사각 격지지보의 구조 성능 평가를 다룬다. 지금까지 NATM 공법을 이용한 터널 시공 시 콘크리트 라이닝 시공 전까지 터널 배면을 지지하는 구조체로서 H형 단면 강지보 및 삼각 격자지보가 주로 사용되었다. H형 단면 강지보는 동일 단면 높이를 갖을 때 삼각 격자지보보다 우수한 휨 성능을 보이지만, 단면이 복부판 및 플랜지로 구성되어 있어서 숏크리트 타설 후 콘크리트 라이닝 내부에 배면 공동이 많이 발생한다. 이를 해소하기 위해 개발된 삼각 격자지보는 숏크리트와 우수한 부착성을 보이나 부재와 부재 간 용접부에서의 파손이 빈번하게 발생한다. 이러한 문제점을 개선하기 위해 사각 격자지보가 개발되었고, 본 논문에서는 유한요소해석 및 하중재하실험을 통해 사각 격자지보의 구조 성능을 객관적으로 분석하였다. 해석연구에서는 강지보의 일반적인 성능평가방법인 4점 재하 휨 하중 해석을 수행하였고, 여기에 더하여 아치 해석을 통해 아치의 항복 하중 및 좌굴 하중 역시 검토하였다. 4점 재하 휨 하중 실험을 통해 사각 격자지보의 극한 상태 하중을 분석하였고, 기존의 격자지보에서 문제되었던 부재 간 접합부의 파손 여부를 검토하였다. 이렇게 해석 및 실험을 통해 신형식 사각 격자지보의 주요한 구조 성능을 평가하였고 이를 기존 격자지보와 비교하였다. In general, the H-shaped steel ribs or triangular lattice girders have been mostly used in constructing tunnels through the NATM construction method. The H-shaped steel rib has higher flexural and axial strength than the triangular lattice girder, but many unexpected gaps can occur in the concrete lining system after shotcreting if the H-shaped steel rib is used as the support system. To achieve better shotcreting quality, the triangular lattice girder was developed. However, in general, the triangle lattice girder has low flexural and axial strength. Likewise, the triangular lattice girder, which has circular sectional members, has so many fractures from welded points at the joints between the members. Finally, the new type of tetragonal lattice girder was developed to overcome those problems. In this study, the structural performance of the tetragonal lattice girders was evaluated through analytical and experimental studies. In the analytical studies, the four-point bending analysis, the traditional evaluation method to determine the flexural strength of the lattice girder, was performed. Moreover, the linear-elastic analysis and stability analysis of the arch structure made by the lattice girders were performed to measure structural performance. Experiments were likewise performed to compare the structural performances of the tetragonal girder with traditional triangular lattice girders.

      • KCI등재

        식이장애 환자에서 나타나는 감정표현불능증의 치료적 함의

        김승준,Kim, Seung-Jun 한국정신신체의학회 2016 정신신체의학 Vol.24 No.1

        Alexithymia is characterized by difficulties identifying and describing feelings, impoverished fantasy life, and concrete and poorly introspective thinking. Alexithymic patients have been reported to show a stable deficit with regard to processing and regulating emotions. Eating disorders are characterized by a persistent disturbance of eating or eating-related behavior that significantly impairs physical health or psychosocial functioning. Like alexithymic patients, patients with eating disorders show the impaired capacity to process and regulate emotions. There is a robust body of literature showing patients with eating disorders are more alexithymic than healthy controls. Specifically, patients with eating disorders experience difficulties identifying and describing emotions. Childhood maltreatment can increase the risk for depression and alexithymia, which can in turn lead to disordered eating symptoms. Also, higher levels of alexithymia are correlated with a less favorable clinical outcome in patients with eating disorder. Therefore, treatments to help processing and regulating emotions of eating disorder patients with pronounced alexithymic traits may seem to lead to a higher possibility of recovery. 감정표현불능증(alexithymia)은 자신의 감정을 판별하거나 감정과 신체 감각을 구별하지 못하고 감정을 교류하지 못하며 공상이 부족하고 외부적 환경에만 인지적으로 집중하는 특성으로 정의되며, 그 기저에는 감정 처리 과정 상의 지속적인 결함이 존재하는 것으로 알려져 있다. 한편, 식이장애는 비적응적인 식이 관련 행동들로 인하여 신체적, 심리사회적 기능이 저하되는 질환으로서 이러한 비적응적 식이 관련 행동은 감정을 처리하고 조절하는 능력의 저하와 관련이 있다는 보고들이 있다. 식이장애 환자들에게 나타나는 감정표현불능증을 연구한 기존 연구들을 살펴 보면 식이장애 환자들은 정상인들에 비해 높은 수준의 감정표현불능증을 보이며, 감정표현불능증 요소 중 감정을 판별하기 어려움 요소와 감정을 묘사하기 어려움 요소가 정상인들에 비해 높은 수준으로 나타난다. 높은 수준의 감정표현불능증은 유년기 학대 및 우울증과 상호 작용하면서 식이장애 행동의 발생 위험성을 증대시키며 식이장애의 치료 효과 또한 반감시키는 것으로 보인다. 이상의 논의를 종합해 볼 때 감정표현불능증을 포함한 정서 처리 및 조절 능력의 결함에 도움을 줄 수 있는 치료가 식이장애의 치료에도 도움이 될 가능성이 있으므로 이에 대한 추가적인 연구가 필요할 것이다.

      • KCI등재

        파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향

        김승준,한택희,원덕희,강영종,Kim, Seungjun,Han, Taek Hee,Won, Deok Hee,Kang, Young Jong 대한토목학회 2013 대한토목학회논문집 Vol.33 No.4

        본 논문은 파형 복부판이 수평 곡선 I형 거더의 극한 거동에 미치는 영향을 다룬다. 파형 복부판은 기하학적 특성에 따라 플레이트 거더의 비틂 및 뒴 강성 증진을 위해 적용이 가능하다. 그동안 파형 복부판이 일반 직선 거더의 극한 거동에 미치는 영향을 다룬 많은 연구들이 있었으나, 면외 방향 거동이 주요하게 나타나는 곡선 거더의 극한 거동에 미치는 영향에 대한 연구는 거의 이루어지지 않았다. 이 연구에서는 비탄성-비선형 해석을 통해 파형 복부판 수평 곡선 I형 거더의 극한 거동을 다룬다. 본 해석 연구에서는 파형 복부판을 갖는 곡선 거더의 극한 거동에 영향을 미칠 수 있는 기하학적 인자로써, 곡선 거더의 횡방향 비지지 길이와 사잇각, 복부판의 파고 및 파장이 주요 매개변수로 고려되었다. 본 해석 연구를 통해, 각 매개변수 변화에 따른 극한 거동 및 내하력 변화를 분석하고, 일반 판형 복부판이 적용된 거더의 내하력과 비교하여 파형 복부판이 내하력 증진에 미치는 영향을 도출하였다. 본 해석 결과에 따르면, 높은 비틂 및 뒴 강성에 의해 파형 복부판은 곡선 거더의 내하력 증진에 효과적인 것으로 나타났다. 그러나 곡선 거더의 곡률 또는 사잇각이 작은 경우, 파형 판의 아코디언 효과에 의해 오히려 내하력이 감소될 수 있다는 것 또한 나타났다. In this study, the effects of corrugated webs on the ultimate behavior of horizontally curved I-shaped girders are investigated. Because of the geometric characteristics of corrugated plates, corrugated webs can be used for enhancing torsional and warping stiffness of plate girders. Many researches have been conducted to study the effects of corrugated webs on the ultimate behavior of straight girders. But, the studies of the ultimate behavior of horizontally curved girders with corrugated webs, which generally show out-of plane behavior manly, have been rarely performed so far. By performing inelastic-nonlinear analysis, the ultimate behavior of curved girders with corrugated webs is studied in this paper. Laterally unsupported length and subtended angle of girders, and length of height of corrugation of webs are considered as the geometric parameters which would be expected to affect the ultimate behavior. By this analytical study with considering the geometric parameters, the changes of ultimate behavior and load carrying capacity of curved girders with corrugated webs are investigated. Also, the effects of corrugated webs on the increase of load carrying capacity for curved girders are studied with comparing to the capacity of general curved girders with flat webs. According to the analytical results, corrugated webs can be used to increase the ultimate load carrying capacity of curved girders, because of their high torsional and warping stiffness. But, it is also indicated that they may decrease the load carrying capacity of curved girders which have relatively small subtended angle or initial curvature, because of an accordion effect.

      • KCI등재

        3-Dimensional scan을 이용한 치아 마모량 측정 방법에 관한 연구

        김승준,최대균,권긍록,이석형,Kim Seung-June,Choi Dae-Gyun,Kwon Kung-Rock,Lee Seok-Hyung 대한치과보철학회 2004 대한치과보철학회지 Vol.42 No.1

        Statement of problem : Tooth wear is physiological phenomenon. Ninety-seven percent of normal people have tooth wear and about 7% has pathologic teeth wear. If we know the amount of tooth surface loss caused by pathologic tooth wear, we may restore it ideally Purpose : Recently measurement of tooth wear by using 3D scan has been increasing. Therefore, we need to know how accurate 3D scan is. Past accuracy test on 3D scan was about linear change, but as we know that tooth wear is volume change. Thus, the purpose of this study is to know how accurate 3D scan is. Material and Methods : For accuracy test of 3D scanner volume values measured by 3D scanner and micro-balance were compared. For test I, preliminary, 3 ball samples and 3 circular cones were made with pattern resin. For test II, 10 teeth shape rubber samples were used. Results and Conclusion : 1. The result of the accuracy test on 3D scan with 3 ball samples and 3 circular cones made of pattern resin has no significant difference(p<0.05). 2. The result of the accuracy test on 3D scan with 10 samples of tooth shape rubber has no significant difference (p<0.05). As a result, we may concluded the analysis of quantifying tooth wear used by 3D scan is useful in the clinic.

      • SCOPUSKCI등재

        폴리 아세틸렌의 비선형 광학성질에 대한 양자 역학적 고찰

        김승준,Kim, Seung Joon 대한화학회 1996 대한화학회지 Vol.40 No.5

        The frequency dependent longitudinal polarizabilities ${\alpha}zz(\omega)$ and the second hyper-polarizabilities ${\gamma}zzzz(\omega)$ of the linear polyenes, $C_4H_6\;to\;C_{30}H_{32}$, have been evaluated using the ab initio time-dependent coupled perturbed Hartree-Fock (TDCPHF) theory with the 6-31G basis set. The ratios of the dynamic properties to the static values have been examined to illustrate the relative dispersion effect and extrapolated to the infinite polymer limit. Also the effect of interchain interaction for linear and nonlinear optical properties has been investigated for $C_4H_6$ and the theoretical discussion has been described to overcome the limitation of ab initio TDHF method in the resonance region. Linear polyenes, ($C_4H_6\;to\;C_{30}H_{32}$)의 frequency dependent longitudinal polarizablilty, ${\alpha}zz(\omega)$ 와 second hyperpolarizabilities, ${\gamma}zzzz(\omega)$를 6-31G basis set에서 ab initio TDHF 이론을 사용하여 계산하였다. 폴리 아세틸렌의 frequency dispersion effect를 보기 위하여 외부 전기장의 주파수 영역에 광학성질을 구한후 무한 사슬을 갖는 고분자에 대하여 extrapolate하였다. 이때걸어준 외부 전기장에서의 광학적 성질에 대한 static field 에서의 광학성질의 비를 사용하여 비공면 영역에서의 dispersion effect를 고찰하였다. 또한 광학성질에 대한 주변 사슬의 효과를 조사하였으며 공명이 일어나는 영역에서의 광학 성질을 계산하기 위한 이론적 방법을 제안하였다.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼