http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
'하르방' 프로젝트: USN 임베디드 시스템 기반의 재난재해 방지 서비스
김대영,김재언,유성은,성종우,김도현,김형순,Kim Dae-Yeong,Kim Jae-Eon,Do Thu Thuy,Chong Poh Kit,Yu Seong-Eun,Seong Jong-U,Lopez Tomas Sanchez,Kim Do-Hyeon,Kim Hyeong-Sun 한국통신학회 2006 정보와 통신 Vol.23 No.5
본 논문에서는 USN 임베디드 시스템을 활용한 재난재해 방지 서비스의 설계 및 실증 시험내용을 기술한다. '하르방' 프로젝트로 명명된 본 연구에서는 최근 활발하게 연구되고 있는 USN 기술을 한라산 국립공원의 등산로에 적용함으로써, 고정밀의 기상 정보를 실시간으로 제공하고 재난재해 상황 감시 및 상황 발생을 실시간으로 알려 조기에 상황 대응이 가능하도록 하였다. 현재 독자적으로 연구개발이 이루어지고 있는 BcN, IPv6, USN 기술을 하나로 융합한 차세대 유비쿼터스 네트워크의 구조 연구는 향후 관련산업을 선도함은 물로, 실제 응용에서도 범국가적인 정밀하고 광범위한 기상예보와 재난재해 방지 시스템으로서의 역할을 수행할 것으로 예상된다.
김대영,전문진,권동영,김희섭,김규선,Kim, Dae-Yeong,Jeon, Mun-Jin,Gwon, Dong-Yeong,Kim, Hui-Seop,Kim, Gyu-Seon 한국천문학회 2012 天文學會報 Vol.37 No.2
위성 개발에서 추력기는 위성의 경사각 및 고도 등의 궤도 제어 용도 이외에 위성 동작 초기 혹은 비상 상황에서 안정적인 전력 공급을 위한 자세 제어용 구동기로 사용되어야 하므로 매우 높은 신뢰성을 필요로 한다. 국내의 실용위성을 위해 개발되어 사용되고 있는 출력기는 1 파운드의 작은 용량으로 위성 운영에 일부 제약을 주게 된다. 본 논문은 위성 운영에 있어 반드시 필요한 궤도 천이 절차와 관련하여 기존에 사용된 절차를 보완하기 위한 방법에 대해 기술한다. 기존에 개발된 위성에서는 궤도 조정을 위한 자세 변화에 추력기를 사용하였다. 그러나 위성의 무게가 커짐에 따라 자세 변환을 위한 시간이 오래 걸려 궤도 조정 효율이 떨어지는 요인이 되고 있다. 뿐만 아니라, 자세 변화 과정에서 벡터 방향의 추력으로 인해 원하지 않는 궤도 변화가 생기므로 정밀 궤도 결정에도 영향을 주게 된다. 최근에 개발된 위성의 경우, 위성의 기동 성능을 높이기 위해 고성능 반작용 휠을 사용하므로 이를 이용하여 궤도 천이 전에 자세 변화를 하도록 하고 있다. 이러한 방법을 적용한 결과, 정밀 궤도 결정에 도움이 될 뿐만 아니라 자세 변화로 인한 연료 소모를 줄이는 효과도 있어 위성의 수명 연장에 도움이 되는 것으로 확인되었다.
LCC Analysis to Determine an Appropriate Apartment Rent Rate for HVAC System Renovation Projects
김대영,임형철,Kim, Dae Young,Lim, Hyoung-Chul Korea Society of Industrial Information Systems 2015 한국산업정보학회논문지 Vol.20 No.5
Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.
UAM 효과 평가를 위한 현장실험 및 정량적 2차원 수치해석기법 개발에 관한 연구
김대영,이홍성,천병식,정종주,Kim, Dae-Young,Lee, Hong-Sung,Chun, Byung-Sik,Jung, Jong-Ju 한국터널지하공간학회 2009 한국터널지하공간학회논문집 Vol.11 No.1
UAM(Umbrella Arch Method)의 효과 및 역학적 보강메커니즘에 대한 연구는 국내외에서 수치해석 및 실험 등을 통하여 상당한 진척이 이루어졌으나 실제 설계 및 적용에 있어서는 아직도 3차원 해석의 해석시간과 복잡성 등의 제약 때문에 UAM의 보강영역과 지반과의 환산물성을 이용하는 정량적이지 못한 2차원해석이 주로 사용되고 있다. 이러한 이유로 합리적, 이론적, 정량적이면서도 손쉽게 수행할 수 있는 설계 및 해석기법이 요구되고 있다. 본 연구에서는 UAM의 보강효과가 미치는 범위를 파악하고 그라우팅 전 후의 강관저변지반 물성변화를 파악하기 위하여 연직방향의 UAM 현장실험 및 실내시험을 수행하였다. 풍화토, 풍화암 지반에 UAM 적용시 그라우트의 주입에 의한 주변지반의 물성치 증가는 미미하며, 강관외부와 천공구경 사이의 공간 및 강관내부에 형성된 시멘트구근과 강관으 강성만이 지반보강 효과에 기여한다는 것을 확인하였다. 이러한 결과와 내공변위제어법(CCM; Convergence Confinement Method) 개념을 바탕으로, 2차원 축대칭해석을 실시하여 막장효과, UAM효과와 지보재효과를 종단변위곡선(LDP)으로 나타내었다. 또한, 2차원 평면변형률 해석시 UAM의 지보효과를 내압의 크기로 변환하여 이를 고려하는 하중분담법을 제안하였다. 이 방법과 기존의 등가환산물성을 적용하는 해석을 비교한 결과, 지반조건, 터널의 심도 및 크기, 강관조건, 초기응력상태 등에 따라 차이가 있지만, 기존의 해석방법에서의 변위량이 새로운 방법에 비해 더 크게 발생하는 것으로 나타나, UAM의 종방향 빔 지지효과를 제대로 평가하지 못하는 것으로 나타났다. Considerable advance has been made on research on effect of steel pipe Umbrella Arch Method (UAM) and mechanical reinforcement mechanism through numerical analyses and experiments. Due to long analysis time of three-dimensional analysis and its complexity, un-quantitative two-dimensional analysis is dominantly used in the design and application, where equivalent material properties of UAM reinforced area and ground are used, For this reason, development of reasonable, theoretical, quantitative and easy to use design and analysis method is required. In this study, both field UAM tests and laboratory tests were performed in the residual soil to highly weathered rock; field tests to observe the range of reinforcement, and laboratory tests to investigate the change of material properties between prior to and after UAM reinforcement. It has been observed that the increase in material property of neighboring ground is negligible, and that only stiffness of steel pipe and cement column formed inside the steel pipe and the gap between steel pipe and borehole contributes to ground reinforcement. Based on these results and concept of Convergence Confinement Method (CCM), two dimensional axisymmetric analyses have been performed to obtain the longitudinal displacement profile (LDP) corresponding to arching effect of tunnel face, UAM effect and effect of supports. In addition, modified load distribution method in two dimensional plane-strain analysis has been suggested, in which effect of UAM is transformed to internal pressure and modified load distribution ratios are suggested. Comparison between the modified method and conventional method shows that larger displacement occur in the conventional method than that in the modified method although it may be different depending on ground condition, depth and size of tunnel, types of steel pipe and initial stress state. Consequently, it can be concluded that the effect of UAM as a beam in a longitudinal direction is not considered properly in the conventional method.
중·저온 영역 SOFC용 고체 전해질로의 응용을 위한 Bi가 첨가된 아파타이트형 란타늄 실리케이트의 전기적 특성
김대영,정광호,이성갑,Kim, Dae-Young,Jeong, Gwang-Ho,Lee, Sung-Gap 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.6
$La_{7.33}Bi_2(SiO_4)_6O_2$ specimens were fabricated by standard solid-state synthesis route for solid oxide electrolytes. The calcined powders exhibited uniform particles with a mean particle size of about $28{\mu}m$. The room-temperature structure of $La_{7.33}Bi_2(SiO_4)_6O_2$ specimens was analyzed as hexagonal, space group P63 or P63/m, and the unit cell volume increased with increase a sintering temperature. The specimens sintered at $1,175^{\circ}C$ showed X-ray patterns of homogeneous apatite single phase without the second phase such as $La_2Si_2O_7$ and $La_2SiO_5$. The specimen sintered at $1,175^{\circ}C$ showed the maximum sintered density of 5.49 $g/cm^3$. Increasing the sintering temperature, total conductivities increased, activation energy decreased and the values were $1.98{\times}10^{-5}Scm-1$ and 1.23 eV, respectively.