방사성고화체로부터의 $^{60}$ Co, $^{137}$ Cs 침출에 대한 표준시험법의 상호비교

김기홍,유영걸,정경기,홍권표,이락희,정의영,고덕준,김헌,Kim, Ki-Hong,Ryu, Young-Gerl,Chung, Kyung-Ki,Hong, Kwon-Pyo,Lee, Nak-Hee,Jeong, Yi-Yeong,Koh, Duck-Joon,Kim, Heon 한국방사성폐기물학회 2003 방사성폐기물학회지 Vol.1 No.1

IAEA, FT-04-020 및 ANS 16.1의 침출시험법을 각각 수행하여 얻은 시험결과를 이용하여 상호 비교 평가하였다. 붕산을 함유한 파라핀 및 시멘트 고화체에서의 $^{60}$Co 과 $^{137}$Cs의 ANS 16.1의 침출지수는 6이상이었으나 고화매질과 탈염수의 종류에 따라 상반되는 침출거동을 보였다. 침출수로 합성해수와 탈염수를 사용하였을 경우 $^{60}$Co는 시멘트 고화체에서는 합성해수, 파라핀 고화체에서는 탈염수에서 침출이 높았다. 반면에 $^{137}$Cs의 침출정도는 시멘트에서는 탈염수, 파라핀에서는 합성해수에서 높았다. $^{60}$Co의 침출분율은 시멘트 고화체에서 IAEA > ANS > FT의 순으로 높았으며, 반대로 파라핀고화체에서는 이의 역순이었다. IAEA, FT-04-020, and ANS 16.1, standard leaching test methods, were evaluated comparatively with their test results. Leaching index of $^{60}$ Co and $^{137}$ Cs by ANS 16.1 method for waste forms of paraffin and cement were above 6.0. Their leaching behavior were depending on the type of matrix and leachant. Leachability of $^{60}$ Co for cement waste form was higher in simulated seawater than do-mineralized water, and was higher in de-mineralized water for paraffin waste form. leachability of $^{60}$ Co was contrary to $^{137}$ Cs. Cumulative fraction leached of $^{60}$ Co was higher in order or IAEA > ANS > FT in a cement waste form.

광선각화증, 보웬병, 편평상피세포암에서 Ki-67, Cyclin A, p53, p16의 발현 양상

이효진 ( Hyo Jin Lee ),신동훈 ( Dong Hoon Shin ),최종수 ( Jong Soo Choi ),김기홍 ( Ki Hong Kim ) 대한피부과학회 2012 대한피부과학회지 Vol.50 No.4

Background: Actinic keratosis (AK) and bowen`s disease (BD) are pre-cancerous diseases, and are regarded as an early squamous cell carcinoma (SCC). AK and BD can be progressed into SCC. In this process, tumor suppressor and cell proliferative proteins may play important roles. Objective: To investigate the differences of expression patterns of the immunohistochemical (IHC) staining and useful markers for differential diagnosis in AK, BD and SCC. Methods: Biopsy had proven 17 cases of AK, 20 cases of BD and 17 cases of SCC, which were all selected. IHC staining for Ki-67 and cyclin-A, as cell proliferative markers, p53 and p16 as tumor suppressor markers, were performed. Labeling index (LI) and distribution pattern of IHC expressions were measured. Results: LI of Ki-67 in AK, BD and SCC were 30.6%, 60.2% and 54.8%, respectively. LI of cyclin-A in AK, BD and SCC were 9.2%, 24.4% and 24.1%, respectively. LI of p53 in AK, BD and SCC were 20.7%, 37.9%, and 39.9%, respectively. LI of p16 in AK, BD and SCC were 10.6%, 38.3% and 39.9%, respectively. Lower 1/3 was the most frequent distribution pattern in AK in all IHC stains, full thickness lower 2/3 were the most frequent distribution pattern in BD and SCC in all IHC stains. Conclusion: LI and distribution pattern of Ki-67, cyclin-A, and p16, as well as the distribution pattern of p53 may be useful markers to differentiate AK from BD and SCC. Higher degree and full-thickness distribution pattern IHC expressions in all stains may be helpful in the diagnosis of BD, rather than AK. (Korean J Dermatol 2012;50(4):290∼298)

Two Korean Digenetic Trematodes : Orientocreadium. koreanum sp. nov. and O. pseudobagri Yamaguti 1934(Orientocreadiidae) from Freshwater Fishes

김기홍,임한종,Kim, Ki-Hong,Rim, Han-Jong 한국어병학회 1995 한국어병학회지 Vol.8 No.2

한국산 민물어류에 기생하는 연충류를 조사하기 위해 본 연구를 시행하였으며, 본 논문에서는 2종류의 흡충류를 동정, 분류하였다. Orientocreadium koreanum n. sp.는 퉁가리의 장에서 검출된 신종이며, O. pseudobagri Yamaguti, 1934는 동자개의 장에서 검출된 한국산 미기록 종이었다. Orientocreadiidae과의 분류학적 문제점들에 관해 고찰하였으며, 분류된 2종에 대해 기존의 기록종들과의 차이점들을 상세히 논하였다. One new and one the first recording digenetic trematodes are described from Korean freshwater fishes : Orientocreadium koreanum sp. nov. from Liobagrus andersoni Regan (Korean torrent catfish) and O. psedobagri Yamaguti, 1934 from Pseudobagrus fulvidraco (Richardson) (Korean bullhead). The problems of the family Orientocreadiidae and the major identifying characters of O. koreanum are discussed.

크로스도킹 거점 결정을 위한 연구 -지역거점을 중심으로-

김기홍,Kim, Ki-Hong 대한안전경영과학회 2017 대한안전경영과학회지 Vol.19 No.3

The respective delivering vehicle loaded with the own cargo moves into the respective delivery area. At the base, the delivery points D1 and D2, for example, have the same starting point but the destination is different. The average delivering time of the delivery vehicle is mostly more than 8 hours a day. Therefore, the efficiency of delivery is generally low. In this study, the deliveries will be forwarded from a base station to a delivery point where cross docking will be applied to a single vehicle, and will be distributed from the cross docking point through cross docking. If the distribution is implemented, one vehicle will not have to be operated from the base to the cross docking point. In that case, logistics cost will be reasonably saved by the reduction of transportation cost and labor time. If one vehicle only runs from the base to the cross docking point, each vehicle will be operated in two shifts, and the vehicle operation can be efficiently implemented. This research model is based on the assumption that the 3 types of ratios between the traffic volume of the vehicles starting at the base and the vehicles waiting at the cross docking point are set to the first ratio of 30% to 70%, the second ratio of 50% to 50% and the final ratio of 70% to 30%. As a result of the study, The delivery time in the cross docking point is much higher than that in present on the condition that the cargo volume in the D2 area is more than 50%. Likewise, the delivery time is slightly higher on the condition that the cargo volume is less than 50%. Time is reduced in terms of 50% model like AS-IS model.

한국산(韓國産) 야조(野鳥)에 기생(寄生)하는 선충류(線蟲類)에 관한 연구(硏究)(제1보(第一報))

김기홍,임한종,Kim, Ki-Hong,Rim, Han-Jong 한국농촌의학.지역보건학회 1990 농촌의학·지역보건 Vol.15 No.1

한국산 야조에 기생하는 윤충류에 관한 연구는 주들(1973)에 의해 흡충류 일부만이 기록되어 있을 뿐 그 외에는 거의 분류학적인 연구가 되어 있지 않은 실정이다. 따라서 저자 등은 1990년 1월부터 1990년 3월에 걸쳐 경기도, 강원도 및 경북등지에서 채집한 야조 5종으로부터 기생윤충류를 조사하였으며, 수집된 윤충류중 일단 선충류 3종을 분류, 기재하였다. 채집된 야조의 종류는 Garrulus glandarius brandtii, Cyanopica cyanus koreensis, Otus scops stictonotus, Asia flammeus flammeus, Buteo buteo japonicus 등이다. 동정된 선충류의 종류는 Acuariidae과의 Dispharynx nasuta(male & female), Spiruridae과의 Excisa excisa(male & female), Fillariidae과의 Diplotriaena manipoli(male & female) 등 3종이며, 이들 3종은 모두 우리 나라에서의 처음 기록되는 종들이다. From five species of wild birds which were collected in the period of January, 1990~March, 1990, three species of nematodes were identified. The three species were Dispharynx nasuta(Rudolphi, 1819) in Spiruridae and Diplotriaena manipoli Chu, 1931 in Fillaridae. They are the first recording species in Korea and the morphological characters of each species(male & female) are described.

일체형 지대주의 Diamond Like Carbon 표면 처리와 나사 조임 시기가 풀림 현상에 미치는 영향

김기홍,곽재영,허성주,Kim, Ki-Hong,Koak, Jai-Young,Heo, Seong-Joo 대한치과보철학회 2008 대한치과보철학회지 Vol.46 No.2

Statement of problem: It is difficult about assessing the loosening tendency of conical connection type implant after cyclic loading with diamond like carbon coating one-piece abutments, and also about the retightening effect. Purpose: This study was performed to investigate the influence of one-piece abutment screw retightening after $5.0{\times}10^{4}$ cyclic loading and Diamond like coating Material and methods: Thirty two ITI implant were divided to 4 groups. Group 1,3-titanium abutment, group 2,4 - diamond like carbon coated abutment. Group 1,2 - $20.0{\times}10^{4}$ cyclic loading after $5.0{\times}10^{4}$ cyclic loading, Group 3,4- after $20.0{\times}10^{4}$ Cyclic loading. After cyclic loading, periotest values were taken and removal torque values of abutments were measured with a digital torque gauge. Results: 1. The removal torque of group 2 after $5.0{\times}10^{4}$ cyclic loading is slightly greater than the other groups but not significantly higher than others (P>0.05). 2. The final removal torque values after $20.0{\times}10^{4}$ cyclic loading of group 1 is bigger than group 3, and group 2 is bigger than group 4, but not significantly higher (P>0.05). 3. The final removal torque values after $20.0{\times}10^{4}$ cyclic loading of all groups are not significantly different (P>0.05). 본 연구의 목적은 내측연결형 임플랜트와 일체형 지대주를 사용하여 최종 보철물을 시적한 뒤에 5만 번의 반복하중 후에 다시 체결하고 20만 번의 반복하중을 가한 후의 지대주 풀림토크와 20만 번의 반복하중을 받은 지대주 풀림토크가 어떻게 달라지는지를 비교하고자 하는 것이다. 실험 재료로는 타이타늄 지대주와 DLC 코팅된 지대주를 사용하였다. 실험군은 4군으로 모두 8개의 ITI SLA $4.1{\times}10mm$ 를 사용하였다. A군과 B군은 5만번, 20만번 반복하중을 가하고 Periotest값과 풀림 토크값을 측정하였으며 C군과 D군은 20만번 반복하중을 가하고 Periotest 값과 풀림토크값을 측정하였다. 풀림 토크값의 측정은 디지털 토크 게이지를 사용하였고, 반복하중은 MTS. (Bionix 850 II, MTS, U.S.A.)를 사용하였으며 100N/cm의 힘을 20도의 경사, 14Hz 의 조건으로 가하였다. A군과 C군은 코팅하지 않은 타이타늄 지대주를 사용하였으며, B군과 D군은 DLC 코팅한 지대주를 사용하였다. 1. 5만번 반복하중을 가한 뒤 측정한 풀림 토크는 B군에서 약간 더 큰 평균값을 보였다. 하지만 통계학적으로 두 군간에 유의한 차이를 보이지 않았다 (P>0.05). 2. 20만번 반복하중을 가한 뒤 측정한 최종 풀림 토크 값은 A군은 C군보다, B군은 D군보다 약간 더 큰 평균값을 보였으나 통계학적으로 두 군간에 유의한 차이를 보이지 않았다 (P>0.05). 3. 20만번 반복하중을 가한 최종 풀림 토크 값은 A, B군과 C, D군 사이에 통계학적으로 유의할 만한 차이가 없었다 (P>0.05).

Prediction of elevated intracranial pressure using quantitative electroencephalogram in a porcine experimental traumatic brain injury model

김기홍,( Heejin Kim ),( Ki Jeong Hong ),( Kyoung Jun Song ),( Sang Do Shin ),( Hee Chan Kim ) 대한응급의학회 2022 대한응급의학회 학술대회초록집 Vol.2022 No.2

물류 종사자의 성격유형이 물류생산에 미치는 영향

김기홍,Kim, Ki-Hong 대한안전경영과학회 2017 대한안전경영과학회지 Vol.19 No.3

In order to increase the productivity of the logistics center and transportation, we try to articulate the priority ranking factors of the productivity influenced by the personality of the field workers (logistics center workers) and functional workers (drivers) via the AHP technique Individual personality was studied by applying the Big 5 model of psychological factors (openness, Conscientiousness, extroversion, Agreeableness, neuroticism). In this paper, extraversion was critically analyzed as a priority factor. A trait of extroversion is a strongly active and individual personality. In this study, the field workers are logistics center workers and the functional workers are drivers. They are interactively influenced in the In & Out operation. For example, when it comes to 'up and down work' and 'inspection work', the functional workers perform 'up and down work' and 'delivery work' and the field workers perform 'inspection work'. Stressing on the respective work has an affect on work productivity. Inspection workforce has something to do with inventory management. Functional workforce affects the delivery workforce. Delivery work is positively correlated with customer satisfaction. Nevertheless, as a result of research, extrovert personality that has something to do with an energetic activity would not affect on the implementation of their operation. In addition, personal extraversion of workers and drivers in the warehouse can have a significant impact on job commitment and productivity improvement.

탄화실 부착카본 제거장치 개발

김기홍,이용국 ( Ki Hong Kim,Yong Kuk Lee ) 한국화학공학회 1995 화학공학의이론과응용 Vol.1 No.2

가공식품 설비의 재질별 베이스 프레임에 관한 변형 및 하중 구조해석

김기홍,김석호,최원식,Kim, Ki-Hong,Kim, Seok-Ho,Choi, Won-Sik 한국산업융합학회 2022 한국산업융합학회 논문집 Vol.25 No.5

In this paper, structural analysis was conducted on the base frame for materials of the conveyor system that automatically produces nurungji. The materials of the base frame were selected as SS400, STS304, Al6063-5. Structural analysis performed Von-Mises stress and maximum displacement for 38 hot plates in real situation, and performed weight of distribution force for yield strength, and calculated safety factor. SS400 and STS304 have little displacement, but Al6063-5 is deformed to 0.149mm, which is 2.6 times greater than other materials. However, since the safety factor was calculated as 8.5, it can be applied to the applicable food processing equipment. The weight of the distributed force for the yield strength of the materials was 17.7kN for SS400, 14.7kN for STS304, and 10.2kN for Al6063-T5. When manufacturing other processed foods with a base frame of the same size, a material suitable for the corresponding weight should be selected.