http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
진동시험을 이용한 원자력발전소 캐비닛 구조의 지진응답예측기법
구기영,취진타오,조성국,김두기 한국지진공학회 2008 한국지진공학회논문집 Vol.12 No.5
본 연구는 원자력발전소에 설치되는 캐비닛형 전기기기의 동적 진동시험 자료를 이용하여 캐비닛의 지진응답을 예측할 수 있는 기법을 제안하였다. 제안된 기법은 1) 절점질량 이상화 모델에 기반한 등가 지진하중 산정, 2) 진동시험자료에 기반한 캐비닛 구조의 입출력 상태방정식 규명, 3) 산정된 등가지진하중과 규명된 입출력 상태방정식을 사용한 지진응답산정의 과정으로 구성된다. 제안된 기법은 유한요소기법(FEM) 모델 개선(Model Updating)에 기반한 지진응답예측기법에 비하여 모델링 오차가 개입 되지 않는 장점을 가진다. 캐비넷 구조를 이상화한 2차원 프레임 모델과 3차원 상세 모델에 대한 수치검증을 통하여 제안된 기법이 지진응답을 매우 정확하게 예측을 함을 관찰하였고, 측정 노이즈에 대해서도 강인함을 관찰하였다. 추후연구로 실험검증이 요구된다. This paper presents a seismic response prediction method using vibration tests of cabinet-type electrical equipment installed in a nuclear power plant. The proposed method consists of three steps: 1) identification of earthquake-equivalent forces based on lumped-mass system idealization, 2) identification of a state-space-equation model relating input-output measurements obtained from the vibration tests, 3) seismic prediction using the identified earthquake-equivalent forces and the identified state-space-equation. The proposed method is advantageous compared to other methods based on FEM (finite element method) model update, since the proposed method is not influenced by FEM modeling errors. Through a series of numerical verifications on a frame model and 3-dimensional shell model, it was found that the proposed method could be used to accurately predict the seismic responses, even under considerable measurement noise conditions. Experimental validation is needed for further study.
구기영,Jun-Young Hong,박승희,이종재,윤정방 국제구조공학회 2009 Smart Structures and Systems, An International Jou Vol.5 No.2
A framework for structural health monitoring (SHM) systems is presented utilizing a recent 3.5 generation mobile telecommunication technology, HSDPA (High Speed Downlink Packet Access). It may be effectively applied to monitoring bridges, cut-slopes, and other facilities located in rural areas where the conventional Internet service is not readily available, since HSDPA is currently commercialized in 86 countries to make the Internet access possible in anywhere the mobile phone service is available. The proposed SHM framework is also incorporating remote desktop software to have remote control/operation of the SHM systems. The feasibility of the proposed framework has been demonstrated by field tests on a highway bridge in operation. One can expect that fast advances in the mobile telecommunication technology will further enhance the performance of the SHM network using the proposed framework for bridges and other facilities located in remote areas without the conventional wired Internet service.
천연가스 연료개질기 적용을 위한 금속 구조체 촉매 연구동향
구기영,정운호,권순철,윤왕래 한국공업화학회 2016 한국공업화학회 연구논문 초록집 Vol.2016 No.1
연료개질기는 연료전지 스택에 고농도의 수소를 공급하기 위한 미니 수소 생산 플랜트로 탈황, 수증기 개질, 수성가스전이, 선택적 CO 산화반응으로 구성되어있다. 세라믹 펠릿 촉매가 충진된 충진탑 촉매 반응기가 주로 사용되는데, 이러한 충진탑 촉매 반응기는 열 및 물질 전달 제한으로 인한 낮은 반응 속도, 채널링, 압력 손실, 느린 응답특성 등의 문제점이 있다. 특히, 가정용 연료전지 시스템과 같이 제한된 공간 내에 설치가 필요한 연료개질기의 경우, 단위 반응들 간의 열을 효율적으로 활용하고 집적화 할 수 있는 컴팩트 연료개질기 설계 기술이 요구되고 있다. 따라서, 이를 위한 대안으로 금속 구조체 촉매를 적용한 컴팩트 연료개질기 설계 기술 개발이 필요하다. 본 발표에서는 천연가스로부터 수소 생산을 위한 연료개질기 적용을 위해 금속 구조체 촉매 개발의 주요 이슈와 최근 연구 동향을 살펴보고, 고활성 고 내구성의 금속 구조체 촉매 설계 방향을 제시하고자 한다. 또한, 현재 KIER 에서 수행하고 있는 금속 구조체 촉매 개발의 주요 연구 결과를 함께 소개하고자 한다.