http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
역삼투막의 선택적 제거특성을 이용한 원자력발전소 붕산수 중의 실리카 제거에 관한 연구
윤석원,박광규 한국막학회 1997 멤브레인 Vol.7 No.4
고온, 고압으로 운전되고 있는 원자력발전소의 1차 계통수측에서, 실리카는 양이온 불순물과 결합하여 핵연료 피복재에 규석(zeolite)층을 형성하므로 계통구조물의 건전성에 영향을 미치게 된다. 따라서 핵연료와 접촉하는 1차 계통수측에서는 규제치 이하의 수준으로 실리카 농도가 유지되어야 한다. 본 논문에서는 실리카 제거 작업시 발생되는 방사성 폐기물의 양을 최소화 하고 붕산 소모량을 줄이기 위해, 상용화 되어 있는 5종류의 막을 이용하여 붕산 및 실리카가 함유된 수용액에 대한 조업온도, 공급유량 변화가 투과량, 붕소회수율, 실리카 배제율에 미치는 영향에 대하여 실험을 수행하였다. 이를 이용하여 계통수내에서 실리카 만을 효과적으로 제거할 수 있는 장치를 설계하였으며, 특성이 다른 2종류의 막을 3단으로 구성하여 상황변화에 따른 대응능력을 높였다. 실험결과 기존 원자력발전소에서 사용하고 있는 Feed and Bleed 방법에 비해 폐기물 발생량은 7%에 불과했고, 농축 폐기물에 포함되어 소모된 붕산의 양은 15.7%에 불과하였다. The concentration of silica is required to meet a certain level because silica affects fuel and materials integrity by forming a zeolite layer on fuel cladding surfaces. When the established Feed and Bleed method is employed, nuclear waste increase and the corresponding amount of boric acid is constantly consumed. This study concentrates on minimizing the amount of nuclear waste and consumption of boric acid. Using five different membranes, operating conditions such as temperatur, feed water flow rate, boric acid recovery and silica removal rate were examined. A silica-selective removal system was designed based on the above optimization procedures. Three-stage system was designed with two characteristically different membranes so that it could correspond with the different situation easily. Compared to the pevious results of the Feed and Bleed method, the current method showed that the amount of nuclear waste was reduced to 7%, and the consumption of boric acid to 15.7%.
연소 후 배가스의 CO2 제거를 위한 분리막 공정의 경제성 분석
윤석원,이성훈,여영구,김진국 한국막학회 2016 한국막학회 총회 및 학술발표회 Vol.2016 No.11
분리막 및 다양한 CO2 포집공정들의 연구에 있어, 경제성 평가는 각 공정들을 비교 분석하며 개발된 기술의 경제적 타당성을 검토하는데 중요한 역할을 한다. 본 연구에서는 분리막 기반의 CO2 포집공정에 대한 경제성 분석을 수행하여 그 결과를 살펴보았다. 분리막 공정의 전산모사와 최적화를 위하여 분리막 모델링 및 Aspen HYSYS®를 활용하였으며, 최적화 결과를 바탕으로 CAPEX 및 OPEX를 제시하여 분리막 공정의 경제성 평가를 진행하였다.
윤석원 西原大學校 1981 西原大學 論文集 Vol.10 No.-
The appearance of Kouros is rather different from the traditional idol making of the early period of Greece. In other words, Kouros was to be the temple's dedication statue or the memorial statue of the heroic death and further more it was made to idealize the strong athelet's eternal youth. Although Kouros is one type of sculpture to indicate the Archaic period, it has great connections with the Egyptian prototype but actually Kouros started from ignoring the basic ideas of the foreign prototype. To summerize a few of the stylistic characters, Ist, Kouros completed the body out of the firm and delicate marble statue form. Such soft stone carvings as limestone or diorite were taken from foreign traditions. This affected the Hellenism and Renaissance and originated the tradition of the stone carving. 2nd, It creates concepts of movement which are premise by gravity and balance by inserting mobility to body expression, which were controlled through anatomy research. 3rd, It brings diffusion of expressive style by optically and spacialy experimenting and expressing geometrical and decorative expression elements (coiffure, plinth, polychromy,). G. Basin (1976) once stated "Frist form, then mobility" about the course of Kouros's development. Going through these experimental courses, Kouros formed an original style which developed into an international style by ca. 530 B.C. As it approached the end of the Archaic period, Kouros had a tendency of working not only with lime stone but also with bronze. This is because the material merits of bronze, harmonized well with the expressional conditions of Kouros. As a result, modelling of clay became widely spread, as free and delicate body expression became possible. Based on the clay model and the bronze statue, expression of Agalma, which developed through the course of translating form on to stone, became a basis for persuing aesthetic space that is known as "severe style". Through the 170 years of the Archaic period, Greeks not only expressed the idea youth's appearance but also gave invariable suggestions through Kouros on how human spirit and many elements of expression are harmonized and completed formally in three dimentional space.
CO<sub>2</sub>포집 공정 최적화 설계 및 경제성 평가
윤석원,이성훈,장문기,서동우,김진국 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
경제성 평가 방법론을 적용하여, 연소 후 이산화탄소 포집 기술들간의 기술 우위성을 비교 검토하고, 포집 기술의 특성을 반영하여 기술별 포집 비용의 절감 방안을 도출하고자 한다. 포집 공정의 설계 최적화를 적용함으로써, 포집 소재의 성능을 최대화하면서 포집 비용을 체계적으로 절감시키는 공정 설계 방법론에 대한 소개를 하고자 한다. 사례 연구를 통해, 전체 공정의 시스템적인 통합 설계가 중요함을 보이며, 배출 가스의 특성과 공정적 제한 조건 등이 포집 공정 설계 결과와 포집 경제성에 미치는 영향을 설명하고자 한다. <sup>**</sup> 본 연구는 2014년도 정부(과학기술정보통신부)의 재원으로 (재)한국이산화탄소포집 및 처리연구개발센터의 지원을 받아 수행된 연구임(NRF-2014M1A8A1049338).