http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
PAA-PAN 복합막을 이용한 에탄올 수용액의 투과증발 분리
원장묵,하백현,최호상 한국막학회 1996 멤브레인 Vol.6 No.3
우수한 분획특성을 가지는 친수성 고분자인 poly(acrylonitrile) [PAN]을 막소재로 하여 상전환법(phase inversion method)으로 복합막의 지지층으로 사용될 지지막을 제조하였으며, 한외여과 실험을 통하여 지지막의 특성인 순수 투과도와 분획분자량을 측정하였다. 이 지지막 표면에 poly(acrylic acid) [PAA]를 dip-coating 시켜 열처리한 복합막을 제막하고 에탄올 수용액의 투과증발 분리특성을 고찰하였다. PAN 지지막의 UF 특성은 순수의 투과유속이 0.17~31mm3/m2·s·Pa , 분획분자량이 42,000~150,000의 막을 얻었다. 복합막의 투과유속과 분리계수는 지지막의 기공구조 변화에 상당한 영향을 받고 있음을 알 수 있으며, 지지층의 분획분자량의 증가에 따라 투과유속은 감소하였고 분리계수는 공급원액의 농도에 따라 약간의 변화를 보였다. Hydrophilic poly(acrylonitrile) [PAN] membrane with good molecular weight cut-off characteristics were prepared by using the phase inversion method. Permeability and molecular weight cut-off of the membranes were measured through the ultrafiltration test. On the surface of the PAN support membranes, poly(acrylic acid) [PAA] was deposited by dip-coating. The water permeability of the PAN support membrane had 0.17~31mm3/m2·s·Pa , the molecular weight cut-off 42, 000~150, 000. The transport characteristics of the prepared composite membranes were significantly affected by the variation of the support membrane mophology. The permeability of the composite membrane was decreased with increasing molecular weight cut-off of the support membrane, and the separation factor was slightly changed depending on the feed concentration.
판틀형 투과증발 막모듈내에서 feed 온도 분포 예측을 위한 모델링
원장묵,염충균,임지원,배성렬,하백현,윤석원 한국막학회 1996 멤브레인 Vol.6 No.1
For the purpose of the optimal design of a frame and plate type of pervaporation module, model equations which can predict the effects of feed flow condition on the temperature distribution of the feed developed in the module were established and the temperature distribution with feed flow condition was investigated through the model ssimulation. With increasing the Reynolds number of feed flow in the module, the flow velocity gradient in the channel height-direction as well as the volume rate of feed which acts as energy source for the evaporation of perrneants on the permeate-side surface of a membrane increased to such an extent that both mass and heat flux in the channel height direction could increase and the temperature drop of feed due to the evaporation of the permeant could be reduced correspondingly. A decrease in channel height caused the temperature drop of feed because of decreasing feed flow in the module. It was observed that the simulation result on the effect of Re on the temperature distribution of feed in the module has an agreement with experiment. 평판형 모듈 설계의 최적화를 목적으로 feed 흐름 조건에 따른 feed 온도 및 유속분포를 예측할 수 있는 모델식을 확립하였고 모델 모사를 통해 흐름 조건들이 온도 분포에 끼치는 영향들을 조사하였다. 모델내의 유체의 Re 크기가 커지면 채널 두께방향으로의 유속 구배가 커질 뿐 아니라 투과물 증발을 위한 에너지원인 feed 흐름 속도가 커져 물질 및 열흐름이 증가하여 투과물 증발로 인한 feed 온도 강하가 증어든다. 반면에 채널 간격이 작아지면 feed 흐름량이 상대적으로 작아져 급격한 온도 강하를 야기시킨다. Re 크기에 따른 feed 온도 변화는 실험결과와 일치함이 관찰되었다.
원장묵 대한설비공학회 2003 설비저널 Vol.32 No.4
대체에너지는 과다한 초기투자의 장애요인에도 불구하고 화석에너지의 고갈문제와 환경문제에 대한 핵심 해결방안이라는 점에서 선진 각 국에서는 대체에너지에 대한 과감한 연구개발과 보급정책 등을 추진해오고 있다. 본 고에서는 대체에너지의 기술개발 및 정책 전망에 대해서 기술하고자 한다.
"국가 에너지 · 자원 기술개발 기본계획"의 주요 내용
원장묵,김수경,황규철 한국자원공학회 2006 한국자원공학회지 Vol.43 No.4
The sustainable energyresources R&D system should be established for solving the domestic energyresources problem at this point when the natural resources nationalism have pressed the global economy. Until now, domestic energyresources R&D projects had been splitted in three fields and there was no systematic management. In January 2005, the Ministry of Commerce, Industry and Energy (MOCIE) started the energyresources R&D task force in order to systematically manage the energyresources R&D projects at the planning stage. This task force team established a ten-year period of the national basic plan for energyresources R&D to increase the national competitiveness in energyresources fields. This basic plan contains the four strategies which support the fundamental technologies in 108 fields and the systematic R&D system for the innovative development in energyresources industry. 자원민족주의가 세계 경제를 압박하고 있는 현 상황에서 에너지자원 문제를 해결하기 위해서는 체계적인 기술혁신을 통하여 지속가능한 에너지자원 시스템을 구축해야 한다. 지금까지 우리나라의 에너지자원분야 R&D 사업은 각기 다른 3개의 사업으로 진행되어 체계적인 관리가 미흡한 실정이었다. 이에 산업자원부에서는 에너지자원분야 R&D 사업을 기획단계에서 통합관리하기 위하여 2005년 1월 에너지자원기술개발기획단을 발족하였다. 이 R&D 사업단에서는 에너지자원 분야의 국가 경쟁력을 높이기 위하여 2006년부터 향후 10년간의 기본계획을 수립하였다. 이 기본계획은 4대전략을 바탕으로 108개 분야의 핵심기술을 개발하고 통합적 R&D 시스템을 구현함으로서 에너지자원 산업의 성장동력화를 목표로 하고 있다.