Self-assembly and Mechanism of L-Alanine-based Dihydrazide Derivative as Excellent Gelator of Organic Solvents

Wang, Chuan-Sheng,Wang, Xiao-Hong,Li, Zhi-Yuan,Wei, Wei,Shi, Zhong-Liang,Sui, Zhi-Tong Korean Chemical Society 2011 Bulletin of the Korean Chemical Society Vol.32 No.4

A new organogelator, L-Alanine dihydrazide derivative can self-assemble in various organic solvents and turned them into thermally reversible physical supramolecular organogels at extremely low concentrations (< 2 wt %). The gel-sol phase transition temperatures ($T_{GS}$) were determined as a function of gelator concentration and the corresponding enthalpies (${\Delta}H_g$) were extracted. Scanning electron microscopy (SEM) measurements revealed that the interspaces of fiber-like network structures were diminished with the increasing of the LMOG concentration. FT-IR spectroscopy studies revealed that hydrogen-bonding and hydrophobic interaction were the driving forces for the formation of the gels. Based on the data of XRD and molecular modeling, the possible packing modes for the formation of organogelator aggregates were proposed.

Heavy concrete shielding properties for carbon therapy

Jin-Long Wang,Jiade J Lu,Da-Jun Ding,Wen-Hua Jiang,Ya-Dong Li,Rui Qiu,Hui Zhang,Xiao-Zhong Wang,Huo-Sheng Ruan,Yan-Bing Teng,Xiao-Guang Wu,Yun Zheng,Zi-Hao Zhao,Kai-Zhong Liao,Huan-Cheng Mai,Xiao-Dong Korean Nuclear Society 2023 Nuclear Engineering and Technology Vol.55 No.6

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.

Correlation of CT Perfusion Images with VEGF Expression in Solitary Brain Metastases

Zhang, Jian-Hua,Wang, Ming-Sheng,Pan, Hai-Hong,Li, Shu-Feng,Wang, Zhong-Qiu,Chen, Wang-Sheng Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.4

Objectives: To obtain permeability surface (PS) values using multi-slice helical CT perfusion imaging and to evaluate the spatial distribution correlation between PS values and vascular endothelial growth factor (VEGF) expression in solitary brain metastases. Methods: Imaging was performed on 21 patients, PS values being calculated from the central, border and peripheral parts of tumours. VEGF expression was determined by immunohistochemical staining. Results: Rim enhancement was found in 16 cases, the border of the tumour featuring PS elevation with high VEGF expression in 13 cases. In the 5 cases with nodular enhancement, the border and the central part had high permeability and VEGF expression was high in all cases, the correlation being significant (P<0.01). Conclusion: VEGF expression in brain metastases positively correlates with PS values from CT perfusion imaging, so that the latter can be used in the surveillance of angiogenic activity in brain metastases.

Expression of High Mobility Group Box - B1 (HMGB-1) and Matrix Metalloproteinase-9 (MMP-9) in Non-small Cell Lung Cancer (NSCLC)

Wang, Jing-Luan,Wu, Da-Wei,Cheng, Zhao-Zhong,Han, Wei-Zhong,Xu, Sheng-Wei,Sun, Ni-Na Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.12

Objective: This study evaluated the expression level of high mobility group box-B1 (HMGB-1) and matrix metalloproteinase-9 (MMP-9) in non-small cell lung cancer (NSCLC) inmorder to reveal any relation with development and prognosis. Methods: NSCLC and normal tissues were selected from 30 patients at age of 30-73, and used for RT-PCR and Western blot analyses of HMGB-1. A total of 100 paraffin embedded NSCLC tissues were also isolated from patients through surgical resection, and used for detection of HMGB-1 by immunohistochemistry. In addition, 50 samples were also applied for MMP-9 detection, and 30 normal tissues were considered as controls. Correlation analysis of HMGB-1 and MMP-9 was carried out by Pearsons correlation coefficient. Results: The average expression level of HMGB-1 in NSCLC patients was significantly higher than in normal lung tissues. In addition, patients in III-IV period exhibit significantly higher positive rate of HMGB-1 when compared with I-II period cases. Furthermore, a positive correlation with HMGB-1 was found in the expression of MPP-9. Conclusion: HMGB-1 was highly expressed in NSCLC, which may become a prognostic and predictive marker for NSCLC. Besides, MPP-9 was positively correlated with HMGB-1.

Meta-analysis of Gene Expression Data Identifies Causal Genes for Prostate Cancer

Wang, Xiang-Yang,Hao, Jian-Wei,Zhou, Rui-Jin,Zhang, Xiang-Sheng,Yan, Tian-Zhong,Ding, De-Gang,Shan, Lei Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.1

Prostate cancer is a leading cause of death in male populations across the globe. With the advent of gene expression arrays, many microarray studies have been conducted in prostate cancer, but the results have varied across different studies. To better understand the genetic and biologic mechanisms of prostate cancer, we conducted a meta-analysis of two studies on prostate cancer. Eight key genes were identified to be differentially expressed with progression. After gene co-expression analysis based on data from the GEO database, we obtained a co-expressed gene list which included 725 genes. Gene Ontology analysis revealed that these genes are involved in actin filament-based processes, locomotion and cell morphogenesis. Further analysis of the gene list should provide important clues for developing new prognostic markers and therapeutic targets.

Spect-guidance to Reduce Radioactive Dose to Functioning Lung for Stage III Non-small Cell Lung Cancer

Wang, Zhong-Tang,Wei, Li-Li,Ding, Xiu-Ping,Sun, Ming-Ping,Sun, Hong-Fu,Li, Bao-Sheng Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.2

Objective: To investigate the treatment effect of additional information obtained by single photon emission computed tomography (SPECT) lung perfusion imaging (LPI) in the radiotherapy planning process for patients with stage III non-small cell lung cancer (NSCLC). Methods: 39 patients with stage III NSCLC were enrolled. Gross tumor volume (GTV) was outlined by SPECT/CT images, SPECT-LPIs being used to define functional lung (FL) and non-functional lung (NFL) regions. Two sets of IMRT plans were designed to deliver 64Gy to PTV. One was a regular IMRT plan using CT images only (Plan 1), and the other was a corresponding IMRT plan using co-registered images (Plan 2). $FL_{Vx}$ (the % volume of functional lung receiving ${\geq}$x Gy) and $WL_{Vx}$ (% volume of whole lung to receive ${\geq}$x Gy) were compared by paired Student's t test. Kendalls correlation was used to analyze the factor (s) related with the FLV20 decrease. Results: Compared with plan 1, both $WL_{Vx}$ and $FL_{Vx}$ were decreased in plan 2. $WL_{V10}$, $WL_{V15}$, $WL_{V20}$, $WL_{V25}$, $WL_{V30}$ and $WL_{V35}$ decreased 9.7%, 13.8%, 17.2%, 12.9%, 9.8% and 9.8%, and $FL_{V10}$, $FL_{V15}$, $FL_{V20}$, $FL_{V25}$, $FL_{V30}$ and $FL_{V35}$ decreased 10.8%, 14.6%, 17.3%, 14.5%, 14.5% and 10.5%. $FL_{Vx}$ decreased significantly compared with $WL_{Vx}$. There were significant differences in $WL_{V10}$, $WL_{V15}$, $WL_{V20}$, $WL_{V25}$, $WL_{V3}$ and $FL_{V10}$, $FL_{V15}$, $FL_{V20}$, $FL_{V25}$, $FL_{V30}$ between plan 1 and plan 2 (P=0.002, 0.000, 0.000, 0.005, 0.027 and 0.002, 0.000, 0.000, 0.006, 0.010). According to Kendall correlation analysis, NFL had a negative relation with the percentage FLV20 decrease (r=-0.559, P<0.01), while the distance of PTV and NFL center had a significantly positive relation with the percentage of FLV20 decrease (r=0.768, P<0.01). Conclusion: Routine use of SPECT-LPI for patients undergoing radiotherapy planning for stage III NSCLC appears warranted.

Hot-Stamping Die-Cooling System for Vehicle Door Beams

Zhong-de Shan,Yong-sheng Ye,Mi-lan Zhang,Bao-yu Wang 한국정밀공학회 2013 International Journal of Precision Engineering and Vol. No.

The need for lightweight automobiles has promoted the rapid development of hot stamping. The cooling system of the hotstamping die determines the performance of hot-stamped workpieces. By establishing a simplified hot-stamping model, we determined that the temperature–time curve of a workpiece is an exponential function. Our research results showed that the depth from the die surface to the cooling pipes has the biggest impact on the cooling rate and uniformity of the workpiece; the correct depth must be ensured to obtain a uniform quenching rate. By studying the cooling buffer flumes, we discovered that the water flow in the pipes becomes more uniform with increasing flume width. With an increase in the flume height, the water flow uniformity in the pipes first increased, and then decreased. In addition, augmenting the pipe diameter near the inlet improved the water flow uniformity in the pipes.

Fabrication of Robust Superhydrophobic Te@C-TiO2 Nanocomposites Coating for Application in Oil/Water Separation

Tao Wang,Aili Yan,Longgang Zhong,Sheng Wang 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2017 NANO Vol.12 No.10

The main issue limiting the widespread application of superhydrophobic coatings is their low surface robustness, which is closely related to surface roughness on the micro- or nanoscale, and is mechanically weak and easily gets abraded. This work uses Te nanowires as templates to support a carbon layer substrate for the growth of titanium dioxide nanoparticles; this forms hierarchical structures (Te@C-TiO2 nanocomposites). Modification with 1H, 1H, 2H, 2H - perfluoroalkyltriethoxysilane created a free-standing superhydrophobic coating. The optimal preparation conditions for the coating were identified after a systematic investigation of the reaction time of the carbon precursor and concentration of TiOSO4. The best anti-wetting performance was attained with 200 nm diameter Te@C and 15mL concentration of TiOSO4. Furthermore, due to their free-standing performance, the nanocomposites were easily loaded onto a polyester fabric to generate a robust superhydrophobic fabric. This fabric shows excellent mechanical durability and strong resistance to knife scratching, sandpaper abrasion, washing, as well as exposure to acid and alkali solutions. Moreover, the robust fabric is able to separate oil/water mixtures with high separation efficiency.

Construction of antibacterial layer on polyvinylchloride three-channel hollow fiber membranes

Mei-Sheng Li,Ming-Xing Wang,Fei-Yue Wu,Xiao-Zhong Chu 한국공업화학회 2016 Journal of Industrial and Engineering Chemistry Vol.39 No.-

The inner surfaces of polyvinylchloride (PVC) three-channel hollow fiber membranes were successfullymodified with poly(methacryloxylethyl benzyl dimethyl ammonium chloride) (PDMAE-BC) in a modulescale via remote plasma-induced surface graft polymerization method. After grafting a PDMAE-BC layer,the PVC surface hydrophilicity was improved greatly due to the introduction of large amounts of oxygenand nitrogen containing polar groups onto polymer backbone. This hydrophilicity improvement directlyleaded to a high pure water flux and a good antifouling property for the obtained PVC-PDMAE-BCmembrane module. Meanwhile, the inner surface morphologies of modified PVC membranes changedslightly and the surface structures were maintained well. The tensile strength, though deceased slightlyat the remote plasma-treated stage, showed no significant change during overall grafting process. Theobtained PVC-PDMAE-BC membrane module exhibited highly effective and stable antibacterialactivities against Escherichia coli. The antibacterial efficacy of PVC-PDMAE-BC membrane module withonly 6 fibers can achieve about 96.3% and could be further enhanced by increasing the packing density. The antibacterial membrane module may have great potential applications in actual wastewatertreatment and membrane bioreactor (MBR).

Structurally ordered nanofiltration membranes prepared by spatially anchoring interfacial polymerization for highly efficient separation properties

Ao Sheng,Hao Wang,Haoji Jiang,Yaxin Zhao,Hao Li,Hao Jia,Zhong Wei,Heyun Wang 한국화학공학회 2021 Korean Journal of Chemical Engineering Vol.38 No.9

The incorporation of various nanofillers into the interfacial polymerization (IP) process is widely applied to prepare higher performance NF membranes. However, few studies have reported the influence of nanofillers on nanocomposite membrane formation in the IP process. Here, an optical microscope was employed to study the change rule in the 8-NH2-POSS/PSA nanocomposite membrane formation process due to the addition of 8-NH2-POSS nanoparticles. First, the addition of 8-NH2-POSS reduced the diffusion rate of the polyacrylamide hydrochloride (PAH) water phase on the surface against the oil phase because of the interaction with the PAH molecules. Furthermore, the 8-NH2- POSS/PSA nanocomposite membrane structure was more homogeneous and exhibited uniform pinhole defects distribution due to the interaction of the 8-NH2-POSS nanoparticles to the PAH segment. A significant separation performance was observed in the 8-NH2-POSS/PSA nanocomposite membrane due to the hydrophilicity and positive charge of the 8-NH2-POSS nanoparticles. The permeation flux and MgCl2 rejection of the 8-NH2-POSS/PSA nanocomposite membrane increased up to 50.5 L/m2 h at 0.5MPa and 94.8%, respectively, which corresponded to increases of 73.5% and 8.7% as compared to the pristine PSA membrane. 8-NH2-POSS/PSA nanocomposite membranes have great application potential in the water softening and treatment of divalent metals ions under acidic conditions.