http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
( Ruo Peng Cai ),( Yan Long Jiang ),( Wei Yang ),( Wen Tao Yang ),( Shao Hua Shi ),( Chun Wei Shi ),( Jing Tao Hu ),( Wei Gu ),( Li Ping Ye ),( Fang Yu Zhou ),( Qing Long Gong ),( Wen Yu Han ),( Guil 한국미생물 · 생명공학회 2016 Journal of microbiology and biotechnology Vol.26 No.2
Recently, poly-γ-glutamic acid synthetase A (pgsA) has been applied to display exogenous proteins on the surface of Lactobacillus casei or Lactococcus lactis, which results in a surfacedisplayed component of bacteria. However, the ability of carrying genes encoded by plasmids and the expression efficiency of recombinant bacteria can be somewhat affected by the longer gene length of pgsA (1,143 bp); therefore, a truncated gene, pgsA, was generated based on the characteristics of pgsA by computational analysis. Using murine IL-10 as an exogenous gene, recombinant Lactobacillus plantarum was constructed and the capacity of the surface-displayed protein and functional differences between exogenous proteins expressed by these strains were evaluated. Surface expression of IL-10 on both recombinant bacteria with anchorins and the higher expression levels in L. plantarum-pgsA’-IL-10 were confirmed by western blot assay. Most importantly, up-regulation of IL-1β, IL-6, TNF-α, IFN-γ, and the nuclear transcription factor NF-κB p65 in RAW264.7 cells after stimulation with Poly(I:C) or LPS was exacerbated after co-culture with L. plantarum-pgsA. By contrast, IL-10 expressed by these recombinant strains could reduce these factors, and the expression of these factors was associated with recombinant strains that expressed anchorin (especially in L. plantarum-pgsA’-IL-10) and was significantly lower compared with the anchorin-free strains. These findings indicated that exogenous proteins could be successfully displayed on the surface of L. plantarum by pgsA or pgsA’, and the expression of recombinant bacteria with pgsA’ was superior compared with bacteria with pgsA.
( Wen Qian Wei ),( Fang Qi Liu ),( Lei Liu ),( Zuo Feng Li ),( Xiao Yan Zhang ),( Fan Jiang ),( Qu Shi ),( Xiao Yan Zhou ),( Wei Qi Sheng ),( San Jun Cai ),( Xuan Li ),( Ye Xu ),( Peng Nan ) 생화학분자생물학회(구 한국생화학분자생물학회) 2011 BMB Reports Vol.44 No.5
Hereditary non-polyposis Colorectal Cancer (HNPCC) is an autosomal dominant inheritance syndrome. HNPCC is the most common hereditary variant of colorectal cancer (CRC), which accounts for 2-5% CRCs, mainly due to hMLH1 and hMSH2 mutations that impair DNA repair functions. Our study aimed to identify the patterns of hMSH2 and hMLH1 mutations in Chinese HNPCC patients. Ninety-eight unrelated families from China meeting Amsterdam or Bethesda criteria were included in our study. Germline mutations in MLH1 and MSH2 genes, located in the exons and the splice-site junctions, were screened in the 98 probands by direct sequencing. Eleven mutations were found in ten patients (11%), with six in MLH1 (54.5%) and five in MSH2 (45.5%) genes. One patient had mutations in both MLH1 and MSH2 genes. Three novel mutations in MLH1 gene (c.157_160delGAGG, c.2157dupT and c.-64G>T) were found for the first time, and one suspected hotspot in MSH2 (c.1168C>T) was revealed. [BMB reports 2011; 44(5): 317-322]
Wen-wu Huang,Xiaobo Li,Meng Yue Wang,Hai-ming Shi,Ying Peng,Chong-sheng Peng,Min Zhang,Yue Li,Jing Lu 대한약학회 2012 Archives of Pharmacal Research Vol.35 No.11
Two HPLC methods with diode array detection (HPLC-DAD) and electrospray ionization-mass spectrometry (HPLC-ESI/MS), respectively, were developed to investigate the differences of chemical constituents and their metabolism in gastrointestinal tract in vitro between two decoctions of crude and processed Glycyrrhizae radix. Total of eleven constituents (liquiritin apioside, liquiritin, licuraside, isoliquiritin, ononin, glycyrrhizin, liquiritigenin-7,4'-diglucoside, licorice saponin A3, 22β-acetoxylglycyrrhizic acid, licorice saponin G2, and yunganoside E2) were identified in the two decoctions, whereas lower contents of these constituents were usually found in the decoction of processed G. radix. Furthermore, these constituents were metabolized into their respective aglycons in human intestinal bacteria juice, and the metabolism ratios were all higher in processed G. radix decoction. No change was found in artificial gastric or intestinal juice. This study revealed that the processing can alter the contents of main constituents in crude G. radix and their metabolism in gastrointestinal tract, in which intestinal bacteria play an important role in the metabolism of licorice constituents.
The thermal stability of atomic layer deposited HfLaOx: Material and electrical characterization
Wen Yang,Qing-Qing Sun,Run-Chen Fang,Lin Chen,Peng Zhou,Shi-Jin Ding,David Wei Zhang 한국물리학회 2012 Current Applied Physics Vol.12 No.6
HfLaOx based Metaleoxideesemiconductor capacitors were fabricated by atomic layer deposition in this work. The material and electrical properties of the films along with the high temperature thermal treatment were investigated. It was found that samples undergoing annealing at 900 ℃ exhibited the best performance. The film was found to be crystallized to a cubic structure at 900 ℃, and the roughness of the films was estimated to be 0.332 nm. For electrical characterization, the C-V curve of the film is in good agreement with the corresponding simulated curve, and the capacitor does not show any hysteresis. Moreover, the Dit near the center of silicon band gap exhibits lowest value, and it was calculated to be 2.28 × 1011 eV-1 cm-2. HfLaOx based Metaleoxideesemiconductor capacitors were fabricated by atomic layer deposition in this work. The material and electrical properties of the films along with the high temperature thermal treatment were investigated. It was found that samples undergoing annealing at 900 ℃ exhibited the best performance. The film was found to be crystallized to a cubic structure at 900 ℃, and the roughness of the films was estimated to be 0.332 nm. For electrical characterization, the C-V curve of the film is in good agreement with the corresponding simulated curve, and the capacitor does not show any hysteresis. Moreover, the Dit near the center of silicon band gap exhibits lowest value, and it was calculated to be 2.28 × 1011 eV-1 cm-2.
Unactuated Force Control of 5-DOF Parallel Robot Based on Fuzzy PI
Shu-Huan Wen,Wei Zheng,Shi-Dong Jia,Zhi-Xin Ji,Peng-Cheng Hao,Hak-Keung Lam 제어·로봇·시스템학회 2020 International Journal of Control, Automation, and Vol.18 No.6
This paper investigates the fuzzy position/force hybrid control for a class of 5-degree-of-freedom (DOF) redundantly actuated parallel robots. The position control law is designed based on the proportional-integraldifferential (PID) for the 5-DOF redundantly actuated parallel robot. The fuzzy proportional-integral (PI) redundant actuation force control law is designed based on the position/force hybrid control structure for the 5-DOF redundantly actuated parallel robot. The optimum driving force is obtained in the presence of interference, and the force tracking performance of the fuzzy PI controller is better than the conventional PI controller under the interference condition. Based on the fuzzy position/force hybrid controller, the tracking performance of the closed-loop system for the 5-DOF redundantly actuated parallel robot is improved by using the fuzzy position/force hybrid controller and the interference is eliminated effectively in the control system design. Finally, the co-simulation results of ADAMS and MATLAB/SIMULINK are given to show the effectiveness and advantages of the proposed methodscompared with the conventional PI controller.
Xi Zeng,Shi-ming Ji,Ming-sheng Jin,Da-peng Tan,Jue-hui Li,Wen-tao Zeng 한국정밀공학회 2014 International Journal of Precision Engineering and Vol. No.
In order to improve material removal rate of laser hardening workpiece and also make machining tool suitable for free-form surface,a new method based on the softness consolidation abrasives (SCA) is put forward, which means the abrasives are consolidated onthe outer layer of pneumatic wheel to achieve the softness-machining. Binder selecting test shows that acidic silicone is proved tosuit for consolidating particles in cutting process. Combined with robot, the machining system has been established. The machiningeffects of SCA are investigated when it faces with workpiece of different hardness. According to the Preston predicted model, thesimulation results of stress and velocity are proven by analysis of average roughness in the contact region. The contrastive machiningexperimental results show that SCA can supply high cutting stress for material removal and fit for freeform surface’s machining byself-adjustment of flexible body.
Preparation and Thermal Performance of Fullerene-Based Lead Salt
Guan, Hui-Juan,Peng, Ru-Fang,Jin, Bo,Liang, Hua,Zhao, Feng-Qi,Bu, Xing-Bing,Han, Wen-Jing,Chu, Shi-Jin Korean Chemical Society 2014 Bulletin of the Korean Chemical Society Vol.35 No.8
$C_{60}$ is widely investigated because of its unique structure. But its applications in solid propellant seem to be relatively neglected. $C_{60}$ has more outstanding features than carbon black which is widely used as a catalyst ingredient of solid propellant. To combine the advantages of fullerene and lead salts, another good composite in propellant catalysts, we synthesized a kind of fullerene phenylalanine lead salt (FPL) and explored its thermal performances by differential thermal analysis (DTA) and thermogravimetry analysis (TGA). The results show it undergoes four exothermic processes started from 408 K. Combined TGA and X-ray diffractometer (XRD), the decomposition mechanism of FPL was derived by TG-IR and comparing IR spectra of FPL and its residues after burned to $327^{\circ}C$, $376^{\circ}C$ and $424^{\circ}C$, respectively. Effect of FPL on the decomposition characteristic of hexogen (RDX), a type of explosive in propellant, has been investigated using DTA at different heating rate, which shows the decomposition temperatures of the explosive are all reduced by more than 20 K. The corresponding activation energy ($E_a$) is decreased by $30kJ{\cdot}mol^{-1}$. So FPL has potential application as a combustion catalyst in solid propellant.
Estimation of the load-deformation responses of flanged reinforced concrete shear walls
Bin Wang,Qingxuan Shi,Wen-Zhe Cai,YI-Gong Peng 국제구조공학회 2020 Structural Engineering and Mechanics, An Int'l Jou Vol.73 No.5
As limited well-documented experimental data are available for assessing the attributes of different deformation components of flanged walls, few appropriate models have been established for predicting the inelastic responses of flanged walls, especially those of asymmetrical flanged walls. This study presents the experimental results for three large-scale T-shaped reinforced concrete walls and examines the variations in the flexural, shear, and sliding components of deformation with the total deformation over the entire loading process. Based on the observed deformation behavior, a simple model based on moment-curvature analysis is established to estimate flexural deformations, in which the changes in plastic hinge length are considered and the deformations due to strain penetration are modeled individually. Based on the similar gross shapes of the curvature and shear strain distributions over the wall height, a proportional relationship is established between shear displacement and flexural rotation. By integrating the deformations due to flexure, shear, and strain penetration, a new load-deformation analytical model is proposed for flexure-dominant flanged walls. The proposed model provides engineers with a simple, accurate modeling tool appropriate for routine design work that can be applied to flexural walls with arbitrary sections and is capable of determining displacements at any position over the wall height. By further simplifying the analytical model, a simple procedure for estimating the ultimate displacement capacity of flanged walls is proposed, which will be valuable for performance-based seismic designs and seismic capacity evaluations.
Ningtao Wang,Tingting Shi,Ke Peng,Zhipeng Lian,Yiyong Li,Qing Wang,Wen Chen,Bolin Huang 보안공학연구지원센터 2015 International Journal of u- and e- Service, Scienc Vol.8 No.4
Fuzzy logic model and entropy model are useful for the geohazard susceptibility zonation in Jianshi County of Qingjiang River Basin. In this paper, the same impact factors were chosen and the geohazard samples were considered in two cases with quantitative analysis method. The first case 162 geohazards chosen as samples and the other one all of 182 geohazards chose as samples. The authors completed the susceptibility zonation in the two different cases using the two models in order to analysis the effects of the two models. The results of the two models in different cases were almost the same in space, except small differences in some areas. The entropy model was more accurate for the analysis of relationship between impact factors and geohazards, but not stable for different geohazard samples. The fuzzy logic model was better for less geohazard samples. According to the analysis process, it was found that the fuzzy γ operation was the best which was defined in terms of the fuzzy algebraic product and the fuzzy algebraic sum. The results of fuzzy logic model were most useful when γ was 0.20. The fuzzy logic model and entropy model were useful for the geohazard susceptibility which was scientific and useful for the government to manage the geohazards and make the preliminary development plans.