일부 흡연 대학생의 지각된 스트레스와 흡연실태에 대한 상관관계 연구

강초록,권시내,권혜림,박수경,송인혜,오해인,이미지,한승아,황선아,김수지 이화여자대학교 간호과학대학 2003 이화간호학회지 Vol.- No.37

In spite of the seriousness of smoking harm has been developed these days. the increase of national smoking rate and that the people in the twenties are especially leading the rise of national smoking rate is an important issue of national health. Smoking of the university students can occur health problem and cause loss of manpower and expenses in their social activity period. So then the actual state for prevention of smoking and development of a program to prohibit smoking has to be seized urgently and starting with the study of the realities of university students, the effort to find a related fluent of smoking has to be studied. Related to this, the purpose of this study is to seize the general characteristics of smoking university students and to find out the relationship between perceived stress and smoking status among smoking university students. In addition, by collating the relationship between perceived stress and smoking status among smoking university students we have the purpose to furnish the basal data of stress care, the best way to cope with stress through group training and the plan for nursing implementation to decrease the smoking rate. For this study, a survey was conducted for 204 smoking university students of 13 universities in Seoul from 9th of May to 16th of May, 2003. The collected data was analyzed by t-test, Pearson Correlation and ANOVA in the statistical packages SPSS/PC. Major findings of this study are as follows; 1. Of the 204 respondents 85.4% of them were male and 14.6% of them were female. The average age of the sample was 23.19 years old and 41.8% of them were in senior, 21.4% in junior, 16.9% in sophomore, 19.9% in freshman grade. The major motivation to start smoking was 'because of curiosity'(33.8%) and the first smoking experience was at 'senior high school' (41.9%) and at 'college' (41.9%). 2 The highest scored stress factor of smoking university students were stresses about school work. 3. 72.7% had experience to quit smoking at least one or more times. Most of the reason to keep on smoking was 'short will to quit'(51.0%) and the smoking place was usually at 'school' (41.4%). Most respondents for the number ofsmoking friends were '5 people and above' (73.2%). 4. There was a negative relationship between the general characteristics and the entire perceived stress, however, there was a positive relationship between the general characteristics and the perceived stress in 4 categories which is 'sex distinction', 'major of study', 'residence form' and' inmate'. 5. There was a negative relationship between the general characteristics and the entire smoking status, however, there was a positive relationship between the general characteristics and the smoking status in 2 categories which is 'presence of hobby' and 'number of smoking friends'. 6. There was a negative relationship between the perceived stress and the smoking status. Through this study we have seized the relationship between the general characteristics, perceived stress and the smoking status of smoking university students. There was a positive relationship between some of the general characteristics with the perceived stress and the smoking status of smoking university students. Also there was a negative relationship between the perceived stress and the smoking status.

자연정화공법에 의한 소형 하수처리장치 개발을 위한 최적 깊이 및 호기ㆍ협기 비율

서동철,박미령,곽내운,황하나,이홍재,조주식,허종수 한국환경농학회 2006 한국환경농학회지 Vol.25 No.1

DSP를 이용한 모바일 TFT-LCD의 자동 감마 최적화 시스템 개발

조내수(Nae-Soo Cho),류지열(Jee-Youl Ryu),박철우(Chul-Woo Park),권우현(Woo-Hyen Kwon) 제어로봇시스템학회 2009 제어·로봇·시스템학회 논문지 Vol.15 No.3

This paper presents an automatic LCD gamma control system using gamma curve optimization. It controls automatically gamma adjustment registers in mobile LCD driver IC to reduce gamma correction error and adjusting time. The proposed gamma system contains Module-Under-Test (MUT, LCD module), PC installed with program, multimedia display tester for measuring luminance, and control board for interface between PC and LCD module. Proposed algorithm and program are applicable for most of the LCD modules. It is realized to calibrate gamma values of 1.8, 2.0, 2.2 and 3.0. The control board is designed with DSP and FPGA, and it supports various interfaces such as RGB and CPU. Developed automatic gamma control system showed significantly reduced gamma adjusting time of 240 sec. and much less average gamma error of 11% than 42h and 27% with conventional manual method. We believe that the proposed system is very useful to provide high-quality LCD and to improve production process.

플랜트 출력을 이용한 선형모델 추종기 설계

조내수(Nae-Soo Cho),윤경섭(Kyung-Sup Youn),최연호(Youn-Ho Choi),권우현(Woo-Hyen Kwon) 제어로봇시스템학회 2009 제어·로봇·시스템학회 논문지 Vol.15 No.7

The linear model following controller (LMFC) scheme controls a plant based on the output of a reference model, thereby replacing a PI controller that has better time response characteristics, which are irrelevant to the structural perturbation of a plant. However, the main weakness of the LMFC scheme is a slow response time to load changes. Thus, to solve this problem, a robust linear model following controller (RMFC) was developed that is robust in load changes. However, when compared with the LMFC scheme, the RMFC scheme has a weaker performance in the case of system parameter changes. Therefore, this paper presents a new LMFC scheme, where the controller is designed based on the output of a plant rather than the output of a model, as in the case of the conventional LMFC scheme. As a result, in the case of load changes, the response characteristics of the proposed scheme are slower than those of the RMFC scheme, yet faster than those of the conventional LMFC scheme, however, for parameter changes, the proposed scheme has a superior performance over the RMFC scheme. The usefulness of the proposed LMFC scheme is verified through a comparison using MATLAB/SIMULINK.

1차 지연회로를 사용한 ZVS Full-Bridge 컨버터 구동회로 설계

조내수(Nae-Soo Cho),최연호(Youn-Ho Choi),윤경섭(Kyung-Sup Yoon),구본호(Bon-Ho Koo),권우현(Woo-Hyen Kwon) 대한전기학회 2010 전기학회논문지 Vol.59 No.3

The full bridge converter have been used for high power system that is needed to switch the big current. So, EMI and stability problem is occurred. The Soft switching method is the solution to solve the above problem, But implementation of soft switching(ZVS: Zero Voltage Switching) is so complicate and expensive because of the DSP MCU and shift circuit. In this paper, we introduce the technical method for driving circuit of ZVS full bridge converter with 1st order delay circuit and logic elements. The realization of this method is so simple and cheap. The effectiveness of the proposed circuit is verified by experimental results.

터렛 서보 시스템에서 멀티-턴 검출이 가능한 센서리스 위치제어기 구현

조내수(Nae-Soo Cho) 한국전자통신학회 2021 한국전자통신학회 논문지 Vol.16 No.1

본 연구는 터렛 서보 시스템에서 사용되는 고가의 절대형 엔코더를 대체하기 위해서 멀티-턴 가능한 센서 리스 위치제어기를 구현하였다. 센서리스 제어를 위해서는 모터의 위치 정보가 필수적이다. 따라서, 터렛 서보 시스템에서 사용되는 영구자석형 동기 전동기의 수학적 모델로부터 자속 추정기를 구성하였다. 자속 추정기로 부터 회전자 자속을 계산하여 회전자의 속도와 위치 정보를 얻었다. 제로-크로싱 기법을 사용하여, 추정한 회전자 자속이 1회전 할 때마다 하나의 펄스를 생성하여 멀티-턴 횟수를 측정하였다. 모의실험과 실험을 통해 제안한 방법의 유용함을 확인하였다. This study is implemented as a sensor-less position controller capable of multi-turn detection to replace the expensive absolute encoder used in the turret servo system. For sensor-less control, the position information of the rotor is essential. For this, a magnetic flux estimator was implemented from the mathematical model of IPMSM used in the turret servo system. The position of the rotor and the angular velocity of the rotor were obtained using the rotor magnetic flux calculated from the magnetic flux estimator. Using the zero-crossing technique, one pulse was generated for each rotation of the estimated rotor magnetic flux to measure the number of multi-turns. Simulation and experiment results confirmed the usefulness of the proposed method.

전동기 구동 시스템에서의 적분기 포화 방지를 위한 새로운 안티-와인드업 기법

조내수(Nae-Soo Cho),김우현(Woo-Hyun Kim) 대한전기학회 2009 전기학회논문지 P Vol.58 No.3

In a high performance motor driving system, PI controller which is simple implementation is frequently used. But, PI controller has various problems because of an integrator saturation. Therefore, the various methods of an anti-windup have been studied to solve such problems. But, conventional anti-windup methods have still problem with large overshoot and long settling time in the driving conditions. In this paper, to improve such problem, it is proposed a new anti-windup strategy. Using LPF and PI controller, it is improved an overshoot and reduced settling time. Simulation results have verified usefulness of the proposed method using MATLAB/Simulink.

고로 용융물 레벨 변화 추정을 위한 디지털 필터 설계

조내수 ( Nae Soo Cho ),한무호 ( Mu Ho Han ),권우현 ( Woo Hyen Kwon ),최연호 ( Youn Ho Choi ) 한국센서학회 2012 센서학회지 Vol.21 No.1

Optimizing the tapping time of a blast furnace is important to a stable operation and life extension. To optimize the tapping time of the blast furnace, the location of Hearth Liquid Level should be recognized. There are several ways to measure the hearth liquid level in the blast furnace, such as Electromotive Force(EMF) measurement, pressure measurement by putting in nitrogen probe and manometry with strain gauge. In this paper, it will be discussed using strain gauge among the three methods. Conventional strain gauge must be revised periodically. Since, internal pressure, temperature of internal refractory material and wind pressure have effect on the strain gauge. However, static pressure value is required to compensate. To solve these problems, this paper suggests finding relationship between Hearth Liquid Level and strain gauge output, adding digital filter in strain gauge. Using the proposed method, it was possible to estimate the hearth liquid level and determine the appropriate tapping time. Usefulness of the proposed method through simulations and experimental results are confirmed.

1차 지연회로를 사용한 ZVS Full-Bridge 컨버터 구동회로 설계 (pp.160-161)

조내수(Nae-Soo Cho),최연호(Youn-Ho Choi),윤경섭(Kyung-Sup Yoon),구본호(Bon-Ho Koo),권우현(Woo-Hyen Kwon) 대한전기학회 2009 정보 및 제어 심포지엄 논문집 Vol.2009 No.10

The full bridge converter have been used for high power system that is needed to switch the big current. So, EMI and stability problem is occurred, The soft switching method is the solution to solve the above problem, But implementation of soft switching(ZVS : zero voitage switching) is so complicate and expensive because of the DSP MCU and shift circuit. In this paper, we introduce the technical method for driving circuit of ZVS full bridge converter with delay circuit. The realization of this method is so simple and cheap.

Sell Call Radio Buoy용 코드검출기 설계

조내수 ( Nae Soo Cho ),김주환 ( Joo Hwan Kim ),윤경섭 ( Kyoung Seop Youn ),권우현 ( Woo Hyen Kwon ) 한국센서학회 2011 센서학회지 Vol.20 No.3

Sell call radio buoy is mostly used for searching for the location of fishing nets. Sell call radio buoy for the detection of the code uses the band pass filter(BPF). All BPF is used by imported from Japanese companies. But, Japanese companies stopped selling buoys for searching for the location of fishing nets, and domestic manufacturing companies could not sell buoys any more. Therefore, In this paper, a new method to replace the conventional buoy code detector is proposed. The proposed methods are constructed with an analog filter division composed of BPFs and notch filters as well as a microprocessor with analog digital converters. The advantage of proposed methods is able to combine various codes, can enhance receiver sensitivity. The experimental results confirm the usefulness of the proposed method.