http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Bulk Switching Instrumentation Amplifier for a High-Impedance Source in Neural Signal Recording
Myungjin Han,Boram Kim,Yi-An Chen,Hyojung Lee,Seung-Han Park,Eunji Cheong,Jongill Hong,Gunhee Han,Youngcheol Chae IEEE 2015 IEEE Transactions on Circuits and Systems II: Expr Vol. No.
<P>Flicker noise is the most crucial issue in an instrumentation amplifier (IA) for neural recordings because low-frequency neural signals overlap with the frequency of the amplifier's flicker noise. A Chopping technique, often used to reduce the flicker noise, is not desirable for high-impedance input sources due to the charge injection and clock feedthrough from the MOSFETs of the input chopper to the signal source, resulting in a significant increase in the total input-referred noise. Whereas MOSFETs have less flicker noise at the moment of turning on, and the intrinsic flicker noise can be then reduced by turning on and off the MOSFETs in the IA. This brief proposes a bulk switching IA, which can avoid the input current noise. A prototype IA is implemented in a 65 nm CMOS occupying 0.053 mm<SUP>2</SUP>, and it achieves the input-referred noise of 0.74 μ<SUB>Vrms</SUB> (local field potential) for 100 k Ω source impedance, a 3.3 times reduction compared with that of the chopper IAs, while consuming only 3.96 μW from a 1.2 V supply.</P>
XML 문서에서 효율적인 질의를 위한 구조 조인 메커니즘
이명진(Myungjin Lee),김희경(Heekyung Kim),채기준(Kijoon Chae) 한국정보과학회 2006 한국정보과학회 학술발표논문집 Vol.33 No.1
인터넷 환경에서 데이터 저장과 전송을 위한 표준으로 XML이 부각되고 있다. 이에 따라 XML자체에 대한 관심뿐 아니라 XML 질의 처리를 위한 연구도 활발하게 이루어지고 있다. 이러한 연구는 XML문서 자체의 내용 뿐 아니라 구조에 대한 질의에 대해서도 진행되고 있다. 구조에 대한 질의를 위해 경로 질의가 사용되고 있으며, 최근 경로 질의를 효과적으로 처리하기 위하여 여러 가지 색인 기법들이 연구되고 있다. 본 연구에서는 기존에 제안된 대표적인 두 가지 색인기법인, 경로 색인 기법과 구조 조인 기법에 대한 특징에 대해 살펴보고, 구조 조인 기법에 대한 기존연구의 알고리즘의 성능을 개선시킬 수 있는 메커니즘을 제안하였다. 기존 연구에서는 질의에 해당하는 모든 엘리먼트들을 비교하여 결과를 뽑아내지만 제안한 메커니즘은 입력 값의 형태를 변형하여 비교하는 엘리먼트의 수를 줄여 더 적은 조인연산을 수행함으로서 성능을 향상시킬 수 있었다. 이러한 결과를 4절에서 실험을 통해 검증하였다. 실험 결과 기존 방법에 비해 실험한 질의에 따라 최대 34%, 최소 7%의 성능 향상을 이룰 수 있었다.
Development of a Laparoscopic System for In Vivo Observation of the Bonghan Structure
임재관,Myungjin Chae,김정대,소광섭 사단법인약침학회 2009 Journal of Acupuncture & Meridian Studies Vol.2 No.3
Bonghan structures composed of corpuscles and ducts have been observed innumerous animal experiments. The structure has been suggested to be the physicalsubstrate for acupuncture points and meridians used in traditional Chinese medicine. The corpuscle-duct structure on the organ surface has been extensively studied. However, it was only observed after the abdomen of a rat was fully exposed. It maybe desirable to observe these structures under minimally invasive conditions. Ourlaparoscope is specifically designed for in situ, in vivo observation of the Bonghanstructure on the surface of internal organs in rats. We made a laparoscope consistingof a borescope combined with an illumination module and an imaging dataacquisition part. The Bonghan structure is transparent and is hard to see, even withthe borescope. Spraying a specific dye, trypan blue and washing with saline is anecessary process to visualize the structure. For this reason, we devised a stainingand washing system attached in parallel with the borescope in the laparoscopicsystem. The system operated successfully to reveal a Bonghan structure withoutsurgery. This tool opens a host of possible applications such as observation of flow ofstained liquid or drug in the Bonghan duct flowing from the skin to internal organs,and long-term observation of the physiological changes in Bonghan corpuscles.
분산 저장소 구조에서 안전한 데이터 접근을 위한 키 관리 메커니즘
이명진(Myungjin Lee),채기준(Kijoon Chae) 한국정보과학회 2005 한국정보과학회 학술발표논문집 Vol.32 No.2
분산 저장소의 데이터를 여러 사용자가 공유하는 시스템에서는 데이터 보호를 위해 데이터를 암호화하여 저장한다. 사용자가 데이터를 서비스받기 원하면 사용자에게 데이터를 암호화한 키를 공개한다. 이러한 시스템에서는 기존의 사용자가 시스템을 탈퇴할 경우 그 사용자가 접근가능했던 데이터가 위험에 노출되게 된다. 이를 막기 위해서 시스템을 탈퇴한 사용자가 접근 가능했던 모든 데이터 각각에 대해 다른 키를 사용하여 암호화를 해야 한다. 이 과정은 데이터의 크기가 기가바이트 혹은 테라바이트에 달할 경우 막대한 오버헤드를 수반한다. 이러한 문제점을 해결하기 위해 본 연구에서는 사용자에게 데이터 키를 노출하지 않고 사용자가 데이터를 서비스 받을 수 있는 메커니즘을 제안한다.
철근 커플러의 품질, 비용에 관한 QFD-HOQ 비교 및 개선전략
조재호 ( Cho Jaeho ),채명진 ( Chae Myungjin ) 한국건축시공학회 2023 한국건축시공학회 학술발표대회 논문집 Vol.23 No.1
In a reinforced concrete structure, coupler construction is easier to install than jointing or welding reinforcing bars, so it is possible to work by one person. When constructing a reinforcing bar coupler, the coupler construction method must be different for each member that receives a large tensile force or a member that receives a small tensile strength. Various coupler products are used in the global construction market, and the quality, performance, and cost of reinforcing bar joints vary from product to product. This study compares and analyzes the quality and cost of representative rebar couplers according to the requirements using the quality house of QFD-HOQ. The case study presents a quality and cost improvements strategy through QFD-HOQ analysis of rebar couplers.
추락사고 방지를 위한 시설물 위치기반 컴퓨터 비젼의 활용
조재호 ( Jaeho Cho ),최지용 ( Jiyoung Choi ),채명진 ( Myungjin Chae ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
미국 산업 안전 보건국 (OSHA)의 데이터에 따르면, 추락사고는 2020년 모든 건설 노동자 사망자의 36.5%를 차지하고 있다. 국내의 경우 2022년 상반기 건설업 사고사망자 중 절반 이상이 추락사망 재해로 보고되었다. 건설 산업의 고용주와 근로자는 추락사고와 관련된 위험을 인식하고 적절한 낙상 보호 장비 사용하며 적절한 안전절차에 따라 교육과 감독을 제공하는 것이 중요하다. 근래 AI영상인식, 컴퓨터 비젼에 의한 추락사고의 위험을 사전 인지하기 위한 연구가 활발히 수행되고 있다. 본 연구는 영상기반 위험인식에 관한 연구현황을 조사하고 시설물 위치정보에 기초한 위험인식 방법을 제시한다.
Koo, Young Do,Choi, Jin Woo,Kim, Myungjin,Chae, Sehyun,Ahn, Byung Yong,Kim, Min,Oh, Byung Chul,Hwang, Daehee,Seol, Jae Hong,Kim, Young-Bum,Park, Young Joo,Chung, Sung Soo,Park, Kyong Soo American Diabetes Association 2015 Diabetes Vol.64 No.7
<P>Small ubiquitin-like modifier (SUMO)-specific proteases (SENPs) that reverse protein modification by SUMO are involved in the control of numerous cellular processes, including transcription, cell division, and cancer development. However, the physiological function of SENPs in energy metabolism remains unclear. Here, we investigated the role of SENP2 in fatty acid metabolism in C2C12 myotubes and in vivo<I>.</I> In C2C12 myotubes, treatment with saturated fatty acids, like palmitate, led to nuclear factor-κB–mediated increase in the expression of SENP2. This increase promoted the recruitment of peroxisome proliferator–activated receptor (PPAR)δ and PPARγ, through desumoylation of PPARs, to the promoters of the genes involved in fatty acid oxidation (FAO), such as carnitine-palmitoyl transferase-1 (CPT1b) and long-chain acyl-CoA synthetase 1 (ACSL1). In addition, SENP2 overexpression substantially increased FAO in C2C12 myotubes. Consistent with the cell culture system, muscle-specific SENP2 overexpression led to a marked increase in the mRNA levels of CPT1b and ACSL1 and thereby in FAO in the skeletal muscle, which ultimately alleviated high-fat diet–induced obesity and insulin resistance. Collectively, these data identify SENP2 as an important regulator of fatty acid metabolism in skeletal muscle and further implicate that muscle SENP2 could be a novel therapeutic target for the treatment of obesity-linked metabolic disorders.</P>
Hwang, Hyunseok,Lee, Hyeyeon,Han, Myungjin,Kim, Hongchae,Chae, Youngcheol Institute of Electrical and Electronics Engineers 2018 IEEE journal of solid-state circuits Vol. No.
<P>This paper presents an area- and energy-efficient readout for capacitive touch sensors. An analog front end (AFE) with current conveyor mitigates the requirements of front-end opamp and provides a differential current from adjacent channels, removing sensor’s baseline and interferences. The sensing current from the AFE is directly digitized by a current-driven 2nd-order <TEX>$\Delta \Sigma $</TEX> analog-to-digital converter and its direct interfacing with the current signal achieves high signal-to-noise ratio (SNR) without suffering voltage saturation in the AFE, and provides reconfigurable SNRs and frame rates with respect to oversampling ratio. An area-efficient sinc<SUP>2</SUP> filter, whose filter coefficients are commonly provided, enables full parallel implementation of <TEX>$\Delta \Sigma $</TEX> ADCs. A 50-channel prototype IC is fabricated in a 0.18- <TEX>$\mu \text{m}$</TEX> CMOS process, occupying only 1.96 mm<SUP>2</SUP>. Using a 10.1-in <TEX>$28 \times 50$</TEX> touch screen panel and a 3.3-V transmitter, this work achieves SNRs of 53.3 and 41.7 dB with finger and 1-mm- <TEX>$\phi $</TEX> stylus, respectively, while drawing only 6.9 mW from 1.8-V supply at 120 fps. This results in the state-of-the-art figure-of-merit of 0.11 and 0.41 nJ/step for finger and 1-mm- <TEX>$\phi $</TEX> stylus, respectively. Moreover, 500-dpi on-glass fingerprint sensor is verified with the same prototype IC and 15-V transmitter, and <TEX>$70 \times 50$</TEX> fingerprint image is successfully captured with 150- <TEX>$\mu \text{m}$</TEX> cover glass.</P>