Protective effects of vitamins C and E on dichlorodiphenyltrichloroethane-induced genotoxicity and hepatotoxicity in human liver cells

Xiao Ting Jin,Li Song,Xiang Yuan Liu,Hang Qing Li,Long Cheng,Zhuo Yu Li1,,Z. Y. Li 대한독성 유전단백체 학회 2017 Molecular & cellular toxicology Vol.13 No.2

Dichlorodiphenoxytrichloroethane (DDT), a persistent organic pollutant and hepatotoxicant, is used to control the malaria. However, scarce information exists on relevant effective inhibitors of DDT’ toxicity. The aim of this study was to investigate protective effects of natural antioxidants vitamin C (VC) or/and vitamin E (VE) on p,pʹ-DDT-induced genotoxicity and hepatotoxicity in human liver cells. p,pʹ-DDT exposure increased levels of chromatin condensation, comet parameter, micronucleus induction and DPC coefficient of HL-7702 cells in a dose-dependent manner. Also, an increase in mRNA levels of CYP1A1 as well as CYP3A4, and a decrease in UGT along with GST were observed. Interestingly, supplementation with VC or/and VE prevented p,pʹ-DDT-caused alterations in DNA damage and phase metabolism gene expressions, and the combination of VC and VE had a more protective effect than VC or VE alone. These findings illustrated that VC or/and VE could be beneficial for the alleviation of p,pʹ-DDT-incurred toxicity in human liver cells.

Improved lithium storage performance of CeO2-decorated SrLi2Ti6O14 material as an anode for Li-ion battery

Ying Li,Hong-Yan Liu,Ling-Na Shi,Yan-Rong Zhu,Ting-Feng Yi 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.101 No.-

In this work, the CeO2-decorated SrLi2Ti6O14 anode was successfully prepared through a solid-state process. The space-charge effect induced by the internal adsorption of ions on the CeO2 surface can easilyresult in a formation of an excellent conductive interfacial layer between CeO2 and SrLi2Ti6O14. The goodelectrical contact between CeO2 and SrLi2Ti6O14 offers more active sites for the electrolyte storage andredox reaction, and promotes the intercalation/deintercalation of lithium ions, and thus improves therate performance and cycle stability. Due to its unique structure and composition, the CeO2-decoratedSrLi2Ti6O14 composites exhibit high reversible capacities, good cycle performance and outstanding rateperformance. Especially, the CeO2 (5 wt%)-decorated SrLi2Ti6O14 anode shows the most excellent electrochemicalperformance, which delivers a large charge capacity of 121.3 mAh g 1 and a capacity retentionof 94.48% after 100 cycles at 0.5 A g 1. However, the corresponding charge capacity and capacity retentionof pristine SrLi2Ti6O14 are 100.5 mAh g 1 and 86.77%, respectively. The CeO2(5 wt%)-decoratedSrLi2Ti6O14 with enhanced rate capacity, cycle stability and structural stability is a potential electrodematerial candidate for Li-ion battery.

Design and applications of fluorescent detectors for peroxynitrite

Wang, Shan,Chen, Liyan,Jangili, Paramesh,Sharma, Amit,Li, Wei,Hou, Ji-Ting,Qin, Caiqin,Yoon, Juyoung,Kim, Jong Seung Elsevier 2018 Coordination chemistry reviews Vol.374 No.-

<P><B>Abstract</B></P> <P>Peroxynitrite (ONOO<SUP>−</SUP>) is one of the endogenous reactive oxygen species (ROS), which causes damage to a wide array of molecular components in the cells, including DNA and proteins, owing to its high oxidizing as well as nitrating properties. However, the precise pathogenic roles played by this substance in biological systems have not yet been elucidated completely owing to its short lifetime, high reactivity, low concentration and elusive nature in the <I>in vivo</I> applications. Thus, the development of more sensitive and selective techniques for detecting ONOO<SUP>−</SUP>, with high biocompatibilities, sensitivities, and site-specificities, is a significant goal. This review summarizes the recent advances that have been made in developing fluorescent sensors for ONOO<SUP>−</SUP> and their biological applications in diverse living systems.</P> <P><B>Highlights</B></P> <P> <UL> <LI> The general significance of ONOO<SUP>−</SUP> detection. </LI> <LI> The design strategies of functional ONOO<SUP>−</SUP> probes. </LI> <LI> The diverse platforms to design ONOO<SUP>−</SUP> probes, including small molecules, proteins and nanocarriers. </LI> <LI> The diverse biological applications of fluorescent ONOO<SUP>−</SUP> probes. </LI> <LI> Perspectives and potential future directions. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>In this review, the development of fluorescent probes for peroxynitrite detection since 2013 is described. The chemical sensor’s designs has been classified by their reaction based sensing patterns.</P> <P>[DISPLAY OMISSION]</P>

Prognostic Value of PLCE1 Expression in Upper Gastrointestinal Cancer: a Systematic Review and Meta-analysis

Cui, Xiao-Bin,Peng, Hao,Li, Su,Li, Ting-Ting,Liu, Chun-Xia,Zhang, Shu-Mao,Jin, Ting-Ting,Hu, Jian-Ming,Jiang, Jin-Fang,Liang, Wei-Hua,Li, Na,Li, Li,Chen, Yun-Zhao,Li, Feng Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.22

Background: A number of studies have identified a shared susceptibility locus in phospholipase C epsilon 1 (PLCE1) for esophageal squamous cell carcinoma (ESCC) and gastric cardia adenocarcinomas (GCA). However, the results of PLCE1 expression in esophageal and gastric cancer remain inconsistent and controversial. Moreover, the effects on clinicopathological features remain undetermined. This study aimed to provide a precise quantification of the association between PLCE1 expression and the risk of ESCC and GCA through meta-analysis. Materials and Methods: Eligible studies were identified from PubMed, Wanfang Data, ISI Web of Science, and the Chinese National Knowledge Infrastructure databases. Using RevMan5.2 software, pooled odds ratios (ORs) with 95% confidence intervals (CIs) were employed to assess the association of PLCE1 expression with clinicopathological features relative to ESCC or GCA. Results: Seven articles were identified, including 761 esophageal and gastric cancer cases and 457 controls. Overall, we determined that PLCE1 expression was associated with tumor progression in both esophageal cancers (pooled OR=5.93; 95%CI=3.86 to 9.11) and gastric cancers (pooled OR=9.73; 95%CI=6.46 to 14.7). Moreover, invasion depth (pooled OR=3.62; 95%CI=2.30 to 5.70) and lymph node metastasis (pooled OR=4.21; 95%CI=2.69 to 6.59) were linked with PLCE1 expression in gastric cancer. However, no significant associations were determined between PLCE1 overexpression and the histologic grade, invasion depth, and lymph node metastasis in esophageal cancer. Conclusions: Our metaanalysis results indicated that upregulated PLCE1 is significantly associated with an increased risk of tumor progression in ESCC and GCA. Therefore, PLCE1 expression can be appropriately regarded as a promising biomarker for ESCC and GCA patients.

SH2D4A regulates cell proliferation via the ERα/PLC-γ/PKC pathway

( Ting Ting Li ),( Wei Li ),( Jing Yu Lu ),( Hong Liu ),( Ying Hui Li ),( Yan Yan Zhao ) 생화학분자생물학회 2009 BMB Reports Vol.42 No.8

Imbalanced Data Classification Based on AdaBoost-SVM

Li Peng,Bi Ting-ting,Yu Xiao-yang,Li Si-ben 보안공학연구지원센터 2014 International Journal of Database Theory and Appli Vol.7 No.5

The classification of imbalanced data is one of the most challenging problems in data mining and machine learning research. Imbalanced dataset is a form that exists in reality area, which describes truly and objectively the essential characters of something. There will appear paucity of data and flooded in the classification of imbalanced dataset. Beside problems such as loss of information and data splitting phenomenon will also appear when using the traditional machine learning methods. So how to solve the classification problem of imbalanced data will be challenging. In this paper, aiming at the above problems, a classification algorithm based on AdaBoost-SVM is proposed. In the experiments with four typical forms of imbalanced data sets in UCI were validated the effectiveness of this strategy.

Knockout of the EgriBLOS2 gene results in the transparent integuments of Ectropis grisescens larvae

Li Jia-Li,Zhuang Xiang-Lin,Yuan Ting-Ting,Cai Xiao-Ming,Luo Zong-Xiu,Bian Lei,Chen Zong-Mao,Li Zhao-Qun,Liu Nai-Yong 한국응용곤충학회 2022 Journal of Asia-Pacific Entomology Vol.25 No.1

The body colors of insects have evolved specialized roles in body protection, signaling and physiology. In some case, the larvae can camouflage their body colors to adapt the habitants and protect themselves. However, the genetic and molecular basis on larval body colors of the tea geometrid, Ectropis grisescens, remains poorly known. Here, we reported an effect of the lysosome-related organelles complex-1, subunit 2 (EgriBLOS2) gene knockout on larval integuments of E. grisescens, by using a clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) system. Combining transcriptomic data and PCR approaches, we first identified the EgriBLOS2 gene from E. grisescens, which encoded 137 amino acids and comprised 3 introns. In the phylogenetic analysis, EgriBLOS2 clustered in the Lepidoptera clade with high conservation to members in other lepidopteran species. Developmental expression profiles revealed that EgriBLOS2 was constantly tran scribed at each stage, in which its expression was significantly lower in 2nd instar larvae than that of other instars. After injecting EgriBLOS2-specific guide RNA and Cas9 messenger RNA into eggs, 70% of larvae showed the translucent integuments in G0 generation, with an emphasis on black splayed patterns in the 2nd and 8th segments of abdomens. However, some typical characteristics of larvae were not obviously changed in mutant instars, such as ocelli, mouthparts and other appendants. This study has unraveled the roles of EgriBLOS2 in the formation of larval integument colors, and provides an alternative strategy for pest management based on the colors in this species.

Cushion Polyurethane Sandwich Composite Structures Strengthened by a Concave-Convex Fabric Panels

Ting-Ting Li,Peiyao Liu,Bing-Chiuan Shiu,Hongyang Wang,Hao-Kai Peng,Jia-Horng Lin,Ching-Wen Lou 한국섬유공학회 2022 Fibers and polymers Vol.23 No.12

In order to improve the low velocity impact resistance, flexible PU foam composites (FPUC) with a sandwichstructure are proposed. The interlayer is composed of a concave-convex fabric structure while the top/bottom layers are madeof polyurethane foam (PU). The core is prepared as follows. Seven warp knitted spacer fabric types (WKSF) (WKSF.1-7) arelaminated with different number of layers to form cuboids, which are fixed firmly between two layers of low melting pointpolyester (LMPET) fabrics via hot melting. The effects of spacer yarn density, spacer yarn inclination angle, combination ofspacer fabrics, and number of lamination layers on the dynamic cushion performance are evaluated. With the impact energybeing 16 J, FPUs demonstrate an energy absorption level that is 19 % and 39 % greater than PU and WKSF. Furthermore,ultra-high molecular weight polyethylene fabric can effectively enhance the surface strength. Finally, the results arecomputed via theoretical prediction formulae of dynamic buffer resistance is in conformity with the experimental test results.

Effects of different culture systems on the culture of buffalo (Bubalus bubalis) spermatogonia stem cell-like cells in vitro

Ting-Ting Li,Shuang-Shuang Geng,Hui-Yan Xu,Ao-Lin Luo,Peng-Wei Zhao,Huan Yang,Xing-Wei Liang,Yang-Qing Lu,Xiao-Gan Yang,Ke-Huan Lu 대한수의학회 2020 Journal of Veterinary Science Vol.21 No.1

Currently, the systems for culturing buffalo spermatogonial stem cells (SSCs) in vitro are varied, and their effects are still inconclusive. In this study, we compared the effects of culture systems with undefined (foetal bovine serum) and defined (KnockOut Serum Replacement) materials on the in vitro culture of buffalo SSC-like cells. Significantly more DDX4- and UCHL1-positive cells (cultured for 2 days at passage 2) were observed in the defined materials culture system than in the undefined materials system (p < 0.01), and these cells were maintained for a longer period than those in the culture system with undefined materials (10 days vs. 6 days). Furthermore, NANOS2 (p < 0.05), DDX4 (p < 0.01) and UCHL1 (p < 0.05) were expressed at significantly higher levels in the culture system with defined materials than in that with undefined materials. Induction with retinoic acid was used to verify that the cultured cells maintained SSC characteristics, revealing an SCP3+ subset in the cells cultured in the defined materials system. The expression levels of Stra8 (p < 0.05) and Rec8 (p < 0.01) were significantly increased, and the expression levels of ZBTB16 (p < 0.01) and DDX4 (p < 0.05) were significantly decreased. These findings provided a clearer research platform for exploring the mechanism of buffalo SSCs in vitro.

Preparation and Mechanical Property Evaluations of Puncture-Resistant Insoles Composites Reinforced by High-Modulus Filament and Thermal Bonding

Ting-Ting Li,Fei Sun,Xing Liu,Hua-Ling Wu,Ching-Wen Lou,Jia-Horng Lin 한국섬유공학회 2018 Fibers and polymers Vol.19 No.6

High-modulus PET filaments and thermal bonding are used to reinforce the puncture resistance stability of the insole composite. This study aims to discuss the influences of the amount of low-melting-point polyester fibers (LMPET) and needle densities (ND) on tensile, bursting, and quasi-static puncture resistance properties. Besides, significance of LMPET amount and ND on puncture resistance against flat-head (A), spherical-head (B), and pointed-head (C) probes are in particular investigated to simulate the diversified application environments for insoles. Research result shows that, LMPET amount significantly affects the static puncture resistance against three probes; ND only significantly influences the puncture resistance against Probe A and C. Thermal bonding significantly improves the puncture strength against Probe B with various LMPET amounts of insoles, but evidently increases the puncture resistance against Probe A and C when being punched at various ND. The amount of LMPET fibers has a positive influence on the puncture strength of insoles, and 70 wt% of LMPET provide the average static puncture resistance up to 342.6 N. The high-modulus resultant insoles have advantages of flexibility, ease of process, and bendability with a higher and more stabilized puncture resistances.