http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
실시간 광 BJTC 시스템 구현을 위한 신호 흐름 제어
황수용,차광훈,김호연 서울산업대학교 산업대학원 1993 大學院論文集 Vol.2 No.-
One of the most ridiculous issue of the moving target tracking system is real-time processing of the input scene so as to extract the target features and estirmate the target states but there are no way to solve this problem sensationally in a digital algorithm. Recently an optical approach for this problem is presented; named BJTC tracker. In this paper, we propose a hardware that can the control the JTC signal for the BJTC system and show the timing chart of the hardware system to prove the design method. We use the FPGAs, low-accesstime RAM, and high performance ADC and DAC. And we use NTSC type CCDs and monitors.
치은연하 파절로 치조골 소실을 동반한 상악측절치에서 orthodontic extrusive remodeling후 임플란트 식립을 통한 심미수복 : 증례보고
황수연,손원준,한영철,배광식,백승호,이우철,금기연 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.1
심미적으로 중요한 전치부에서 단일 치아 임플란트를 이용한 보철수복은 임상의에게 새로운 도전과제 중의 하나가 되었다. 그러나 전치부에서 single-unit implant는 식립할 부위의 치조골 상태가 양호해야 하는데 치은연하 파절로 인해 치아 주위에 골 손실이 있는 경우 immediate implant는 심미적으로 문제를 야기할 수 있다. 따라서 본 증례는 "orthodontic extrusive remodeling"을 통해 파절치와 주위 조직을 교정적으로 정출시켜 임플란트 식립을 위한 연조직과 경조직을 증대시킨 후 임플란트 식립을 통해 상악측절치에서 성공적인 심미수복을 이룬 증례에 관한 것이다. The treatment of esthetic areas with single-tooth implants represents a new challenge for the clinician. In 1993, a modification of the forced eruption technique, called "orthodontic extrusive remodelling" was proposed as a way to augment both soft- and hard-tissue profiles at potential implant sites. This case report describes augmentation of the coronal soft and hard tissues around a fractured maxillary lateral incisor associated with alveolar bone loss, which was achieved by forced orthodontic extrusion before implant placement. Through these procedures we could reconstruct esthetics and function in a hopeless tooth diagnosed with subgingival root fracture by trauma.
구강 악성 흑색종에서 PCNA 발현에 관한 면역조직화학적 연구
황경균,남윤우,이재일,이종호,심광섭,김명진 大韓顎顔面成形再建外科學會 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.6
Malignant melanoma arising from the mucosa of head and neck region was rare and showed poor prognosis. Some of malignant melanoma were transformed from benign melanotic lesion. Malignant melanoma had high cellular proliferation and rapid growth. The percentage of PCNA-positive cell (labeling index) is high in many malignant tumor. So we compared the pattern of PCNA expression in the melanotic lesion. We performed the immunohistochemical study in malignant melanoma(19 cases), benign melanotic macule(24 cases) and normal mucosa(20 cases) were diagnosed in Seoul National University Dental Hospital between 1980 and 2000. Positive PCNA staining was found mainly in malignant melanoma. The mean PCNA expression in malignant melanoma, melanotic macule, normal tissue were 29.2%, 1.4%, 0%, respectively. Significant differences in PCNA expression were noted between malignant melanoma and melanotic macule(p<0.01), normal mucosa(p<0.01). These result suggested that the PCNA expression seems to be used as a diagnostic indicator for malignancy in malignant melanoma and melanotic lesion.
黃承國,朴盈滿,姜鎬郁 慶南大學校 附設 工業技術硏究所 1991 硏究論文集 Vol.9 No.-
本論文은 自動車關聯産業에서의 서브어셈블리에 대한 單位當總投入材料費와 總純材料費와의 關係를 評價하는 問題를 다룬다. 投入材料費와 純材料費사이에 퍼지니스가 存在한다고 看做하여, 可能性모델을 根據로 하는 퍼지線形回歸分析을 利用하여 各서브에셈블리의 係數를 퍼지數로 求하는 材料費評價問題를 解決하고자 하는 새로운 手法이다. This paper purposes to estimate the relation between total input material cost and total net material cost of sub-assembly in an automotive industry. We suggest a new method to estimate the parameters of each sub-assembly which has fuzzy numbers. We used the fuzzy linear regression analysis based on possibility model in the material cost problem.
조사광이 통과하는 치질의 두께와 광조사시간에 따른 광중합형 복합레진의 중합률에 관한 연구
황기환,장인호,이세준,이광원 大韓齒科保存學會 2002 Restorative Dentistry & Endodontics Vol.27 No.1
Physical properties of composite resins such as strength, resistance to wear, discoloration, etc depend on the degree of conversion of the resin components. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the thickness of tooth structure penetrated by light and applied light curing time. The coronal portions of extracted human teeth( one anterior tooth, three posterior tooth) was embedded by pink denture material. the mounted teeth were cut into three illumination sections (1mm thickness enamel section, 1mm thickness dentin section, 2mm thickness dentin section) and one backing section with cutting wheel. Thin resin films were made by using 6kg pressure between slide glass during 5 minutes. Thin resin film was light cured on coupled illumination section during 40sec, 80sec and 120sec. each illumination section was coupled as follows: no tooth structure(X), ename section(E), enamel section + 1mm dentin section(ED1), enamel section + 2mm dentin section(ED2), enamel section + 1mm dentin section + 2mm dentin section(EDD). To simulate the clinical situation more closely, thin resin film was cured against a backing section of tooth structure. The degree of conversion of carbon double bonds to single bonds in the resin films were examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows; 1. As curing time was increased, conversion rate was increased and as tooth thickness which was penetrated by curing light was increased, conversion rate was decreased. 2. At all tooth thickness groups, conversion rate between 80sec and 120sec was not significantly increased(P>0.05). 3. At 40sec group and 80sec, conversion rate between no tooth structure(X) group and 1mm enamel section(E) group was not significantly decreased(P>0.05). 4. At 80sec group and 120sec, conversion rate between 1mm enamel section(E) group and 1mm enamel section + 1mm dentin section(ED1) group was not significantly decreased(P>0.05).
배기가스 재순환에 의한 실린더 및 피스톤 마모에 미치는 영향에 관한 연구
황광성,김태규,정태상,김유영,하정호 진주산업대학교 산업과학기술연구소 2003 산업과학기술연구소보 Vol.- No.10
The effects of recirculated exhaust gas on the wear of cylinder liner, piston and piston rings have been investigated by the experiment with a two-cylinder, four cycle, indirect injection disel engine operating at 75% load and 1600 rpm spped. For the purpose of comparison between the wear rates of two cylinders with and without EGR, the recirculated exhaust gas is sucked into one of two cylinders after the soot among exhaust emissions is removed by an intentionally designed cylinder-type scrubber equipped with 6 water injectors(A water injector has 144 nozzles of 1.0 mm diameter), while only the fresh air into another cylinder. These experiments are carried out on the fuel injection at a fixed 15.3˚BTDC timing. It is found that firstly the mean wear amount of cylinder liner with EGR is more increased in the measurement positions of the second half than of the first and the mean wear amoount without EGR is almost uniform regardless of measurement positions, secondly the wear rates of the first and second piston ring(compression ring) thickness with EGR are more than twice, but the wear rate of oil ring thickness without EGR is more increased than that with EGR, and finally the wear rate of piston skirt with EGR is a little bit increased, but the piston head diameter is rather increased owing to soot adhesion and corrosion wear, and especially larger with EGR.
황종선,남호윤,문성익,이광형,조충호 한국경영과학회 1996 한국경영과학회 학술대회논문집 Vol.- No.1
본 연구에서는 액체금속로의 핵심구조인 소디움루프를 위한 운전지원 전문가시스템을 개발한다. 소대움루프는 현재 원자력연구소에서 연구 개발 단계에 있으며, 안전 운전을 위한 운전 지식을 연구하고 있는 중이다. 본 논문에서는 이러한 연구 상황에 맞추어 개발되는 전문가시스템에게 요구되는 특징을 정리하고, 소디움루프 운전의 효과적 지원과 운전원의 편의에 중점을 둔 전문가시스템의 개발을 설명한다.