http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
NOD/SCID 마우스 모델을 이용한 인간 제대혈 혼합이식에서의 생착 양상 분석
정양조,김동욱,조빈,강영주,박보배,김혜정,김태규,오일환 대한조혈모세포이식학회 2002 대한조혈모세포이식학회지 Vol.7 No.2
연구배경: 제대혈은 골수에 비해 많은 장점을 가지고 있음에도, 이식 후 성적에 있어 총세포수에 의해 좌우되며, 한 개의 태반으로부터 얻을 수 있는 총세포수의 한계가 있어 주로 소아에 국한되고 있다. 따라서 제대혈 응용의 확대를 위해 생착량을 늘이기 위한 방법으로 다중공여자에 의한 제대혈 혼합이식을 늘일 수 있는지 연구하기 위하여, 본 연구에서는 주조직적합성 형별로 조합된 제대혈을 NOD/ SCID 생쥐에 이식하는 방법으로, 혼합생착의 가능성을 연구하였다. 방법: 조합된 2개 공여자로부터 얻어진 제대혈들을 단일이식 및 혼합이식하여, 혼합이식된 숙주에 생착된 세포를 PCR-SSOP 방법을 사용하여 공여자 별로 추적하였다. 또한 각 공여자세포의 상대적 생착비율을 대조군인 단일제대혈 이식에서 얻어진 생착량과 비교하는 정량적 비교도 함께 하였다. 결과: 총단핵구를 혼합이식한 실험군에서는 주조직적합성의 일치도에 관계없이 한쪽공여자의 세포가 다른쪽에 비해 우세한 편향생착을 보였다. 그러나 임파구를 비롯한 Lineage 양성세포를 제거한 실험군에서는 주조직적합성의 불일치에도 불구하고 뚜렸한 생착의 공존이 관찰되었다. 결론: 본 연구는 제대혈의 생착량을 증가를 목적으로 총단핵구를 혼합이식할 경우 한쪽공여자의 세포에 의해 편중되며, 이것을 이식 후 생착과정에서의 두 종류의 세포의 경쟁에 의해 초래된다는 것을 보이고 있다. 또한 이러한 경쟁은 제대혈에 포함되어 있던 임파구들에 의한 것이며, 생착공존을 위하여는 공여자간 주조직적합성의 일치도 보다, 임파구의 제거가 더 중요하다는 것을 보여주고 있다. Background: Although umbilical cord blood (UCB) has been an attractive alternatives for bone marrow cells, application is limited to pediatric case due to limitation in total number of nucleated cells, that is a single most important factor for outcomes of UCB transplantation. Therefore, increasing overall engraftment by mixed transplantation of UCB derived from multiple donor should comprise one strategy to circumvent the posed limitation of UCB transplantation. In order to investigate the feasibility of establishing co-engraftment by multi-donor UCB cells, we carried out a xenotransaplantation study using NOD/SCID mice for systemic analysis of results on the input-based control of single unit transplantation. Methods: UCB units with various extent of HLA-matchings were co-transplanted into NOD/SCID mice along with single unit transplantation control. The relative contributions of engraftment by cells from each donor-derived were analyzed by HLA polymorphism using PCR-SSOP. Results: In all HLA-based mixed transplantation of total nucleated UCB cells, engraftment of one donor predominated over the other despite that equivalent amount of engraftments were achieved by single donor transplantation. When lineage depleted UCB units were co-transplanted, significant degree of co-engraftments were observed regardless of HLA disparity. Conclusion: Our result show that one donor cells dominate over the other in mixed UCB transplantation and that it is due to competition between donor cells during post-transplantation process. Our results suggest that immune cells contained in UCB unit mediate such competitioin and that 6 locus HLA matching would not be sufficient to prevent the competition.
찰옥수수연구 XVIII 시설하우스에서 2기작 찰옥수수 교잡종의 주요 생육특성 비교
나웅현,복태규,고혁수,백승우,조양희,이희봉 충남대학교 농업과학연구소 2013 농업과학연구 Vol.40 No.2
The major characteristics of the developed corn hybrids were compared at each different planting time; 1st time(April 28) and 2nd time(August 20), respectively. Among traits surveyed, stem height showed highly at 1st time than 2nd, while ear height, stem diameter and ear length were similar at two times. Sugar content of the used hybrids showed highly at 2nd planting time than 1st. Pericarp thickness was also high at 2nd planting time. Especially, among hybrids CNU99 was the highest in stem height and ear length, CNU11 and CNU56 were high in sugar content, and CNU51 and CNU124 were thiner than other hybrids in pericarp thickness. Accordingly, these hybrids will be planted and recognized in 2nd yield trial for superior corn hybrid selection.
콩 단백질/펙틴/몬모릴로나이트 나노복합 필름의 특성 및 산소 투과도 연구
정세환,김성철,조규순,신용섭,장상희,홍기헌,이태진,신부영 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.2
In this study, Mechanical property, thermal property, watervapor, and oxygen permeability of biodegradable Soy protein/Pectin-montmorillonite nanocomposite, prepared with Na^(+)-MMT, have been studied. X-ray diffraction and TEM experiments an polymer/silicate composite samples demonstrated that the intercalation of polymer chains leads to increase in the spacing between silicate layers. In addition, it were found that the intercalated Soy protein/Pectin/montmorillonite nanocomposite were prepared. It was found that the addition of only a small of clay was enough to improve the thermal stability and mechanical property of Soy protein/Pectin/montmorillonite nanocomposite. watervapor of Soy protein/Pectin/montmorillonite nanocomposite was generally lower than that of Soy protein/Pectin. oxygen permeability of Soy protein/Pectin/montmorillonite nanocomposite was generally lower than that of Soy protein/Pectin.
창의적 디지털 역량 향상을 위한 디자인 수업 설계원리 개발
조규태(Gyu Tae Jo),한예진(Ye Jin Han),조영환(Young Hoan Cho) 학습자중심교과교육학회 2022 학습자중심교과교육연구 Vol.22 No.7
목적 본 연구는 초등학생의 창의적 디지털 역량 수준을 진단하고 적응적으로 지원할 수 있는 디자인 수업 설계원리를 개발하고 타당성을 검증하였다. 방법 창의적 디지털 역량 향상을 위한 디자인 수업 설계원리를 설계⋅개발연구 방법에 따라 개발하였다. 내적 타당화를 위해 4명의 교육 전문가가 수업 설계원리를 검토하였고, 초등학교 6학년 1개 학급을 대상으로 디자인 수업 설계원리를 적용하여 외적 타당화를 실시하였다. 수업 효과를 조사하기 위해 학습자 설문과 면담을 실시하였고 디자인 산출물을 분석하였다. 결과 본 연구는 창의적 디지털 역량 향상을 위한 디자인 수업 설계원리 9개와 상세지침 28개를 개발했다. 초등학교 수업에 설계원리를 적용한 결과, 학생의 창의적 디지털 역량 수준, 수업에 대한 흥미, 디지털기기 활용에 대한 효능감이 유의미하게 향상되었다. 결론 창의적 디지털 역량 향상을 위해 실제적인 문제 중심의 소프트웨어 교육을 설계하고, 학습자의 개인차를 고려한 적응적인 지원이 필요하다. Objectives This study developed instructional design principles to diagnose and adaptively support students’ creative digital competence in design class. Methods The design and development research method was applied to developing instructional design principles for enhancing creative digital competence. For internal validation, four educational experts reviewed instructional design principles, and external validation was conducted through applying instructional design principles to the 6th grade class in an elementary school. To investigate the effectiveness of the class, this study collected multiple data sources, including surveys, interviews, and design outputs of learners. Results This study developed nine design principles and twenty eight guidelines for enhancing creative digital competence in design class. As results of applying the principles and guidelines, the class was effective in improving learners’ situational interest, ICT self-efficacy, and creative digital competence. Conclusions For improving creative digital competence, we should design software education focusing on authentic problems and provide learners with adaptive supports, considering their individual differences.
IPM type 전동기의 구동방식 및 통전비에 따른 온도특성 비교
김용태(Yong-Tae Kim),조을규(Eul-Gyu Jo),조규원(Gyu-Won Cho),김규탁(Gyu-Tak Kim) 대한전기학회 2013 대한전기학회 학술대회 논문집 Vol.2013 No.10
일반적으로, 차량 내부 및 산업현장에서 사용하는 IPM type 전동기는 BLDC구동방식과 동기기 구동방식으로 나뉘며 각각의 구동방식에서 정격 상태로 장시간 구동하는 연속구동 및 빈번한 구동·정지에 따른 단속 정격으로 동작한다. 그리고 단속 구동 시 온도의 상승·하강이 반복적으로 발생하여 연속 정격시와는 다른 특성을 나타내므로, 구동방식 및 통전비에 따른 열원 산정이 매우 중요하다. 그러므로 본 논문에서는 IPM type 전동기의 구동 방식 및 통전비에 따른 온도 특성을 열동가회로망 법을 이용하여 계산하고 실험 결과와 비교하여 그 타당성을 입증하였다.