체계적인 보안 정책 관리를 위한 계층적 보안 모델 설계

황윤철,엄남경,장재웅,이상호 충북대학교 컴퓨터정보통신 연구소 2001 컴퓨터정보통신연구 Vol.9 No.1

인터넷 서비스의 다양화와 인터넷을 구성하는 네트워크의 대형화로 인해 다양한 특성을 갖는 구성요소와 환경 등의 요인으로 시스템간의 거래에 대한 보안정책 설정 및 제어가 어려운 문제로 등장하고 있다. 보안 정책 기술이란 인터넷상에서 정보보호 기능을 구현할 때 적용하는 정책들에 대한 검색, 접근제어, 분배 및 처리하는 기술을 의미한다. 이 논문에서는 이러한 현실적인 문제를 해결하기 위해 대형화되어 가는 인터넷 전체에 걸쳐 효율적으로 적용할 수 있는 계층적 구조의 보안 정책 모델을 설계한다. Security policy association and control about transaction between systems must be hard problem to solve because of the environment and composite factors with variable properties by diversity of internet service and enlarging a scale of organizing internet. Security policy technique means retrieval, access, control, distribute and process technique about adoptable policies when implementation is information security function on internet. In this paper, to solve this actual problems, Design of a hierarchical structure security policy model applicable to internet.

수술로 절제된 간의 국소 결절성 증식의 임상적 특징

황남철,최문석,이준혁,고광철,백승운,유병철,이종철,이광웅,조재원,박철근 대한간학회 2004 Clinical and Molecular Hepatology(대한간학회지) Vol.10 No.2

목적: 간의 국소 결정성 과형성은 일반적으로 특별한 치료가 필요 없는 양성 종양이다. 그러나 드물지만 합병증이 발생한 경우와 진단이 불확실한 경우에는 수술을 시행하게 된다. 이에 저자들은 간절제술을 시행한 국소 결절성 과형성의 임상적, 영상학적 특징들을 알아보고자 하였다. 대상과 방법: 1995년부터 2003년까지 수술을 시행하여 조직을 확인한 국소 결절성 과형성 환자 10명을 대상으로 연령, 성별, 실험실 검사 및 영상 소견과 조직 소견을 분석하였다. 결과: 연령의 중앙값은 37.5세, 남녀 비는 1.5:1이었다. 5예에서는 간세포선종이나 간세포암종을 감별할 수 없어서 수술을 시행하였으며, 수술 후 우연히 진단된 예는 4예이었다. 간세포암종의 위험 인자를 가지고 있었던 예는 4예(B형 간염 바이러스 보유자 3예, 간경변 2예)이었다. CT검사가 시행되었던 6예 중 5예는 동맥기에서 조영 증강을 보였고 문맥기 및 지연기로 감에 따라 주변과 동일(4예)한 또는 감소(2예)되는 양상을 보여 간세포암종과의 감별이 어려웠다. 크기는 3.2±2.2㎝이었으며 위치는 간우엽의 후하구역(S6)에 가장 많았다(30.0%). 4예에서 수술 전 침생검을 시행하였으나 고분화 간세포암종이나 간세포선종과의 감별이 어려웠다. 결론: 임상상, 영상검사 및 간침생검으로도 간세포암종이나 간세포선종과의 감별이 어려운 경우 수술을 시행하였으며 수술 전에는 발견하지 못하였지만 다른 질환으로 인한 수술시 우연히 발견된 경우도 있어 국소 결절성 과형성의 수술 전 진단이 어려운 경우가 적지 않음을 알 수 있었다. Background/Aims: Focal nodular hyperplasia (FNH) is a benign hepatic tumor with few serious complications and no malignant transformation. However, differential diagnosis between FNH and other liver tumors, especially hepatocellular carcinoma, is often difficult. Methods: Clinical features of surgically resected FNH were reviewed. From January, 1995 to February, 2003, 10 patients with surgically resected FNH were enrolled. Their age, sex, results of laboratory examination, imaging studies and pathologic findings were evaluated. Results: Median age was 37.5 years and sex ratio (male:female) was 1.5:1. In 5 cases, resection to exclude hepatic adenoma or HCC was performed. Four cases were diagnosed incidentally after surgery. Four patients had risk factors for HCC, such as hepatitis B virus infection, liver cirrhosis or both. The size of FNH was 3.2 2.2 cm. The most common site of the tumor was segment 6 (30.0%). Differential diagnosis with HCC was difficult in 5 of six cases in whom CT was performed. Although needle biopsies were performed preoperatively in 4 cases, it was difficult to distinguish FNH from hepatic adenoma or HCC. Conclusions: FNH was resected due to uncertainty of diagnosis, or incidentally during hepatectomy in patients with other liver disease. In the former, differential diagnosis with hepatic adenoma or HCC was a major problem despite extensive work-up including dynamic CT or biopsy. (Korean J Hepatol 2004;10:135-141)

T1 강조 영상에서 선조체 고신호강도를 보이는 당뇨 환자에서의 편측무도증

정승철,이병철,김상윤,배재천,황성희,도화범,박종호 대한신경과학회 1997 대한신경과학회지 Vol.15 No.1

철화분청사기 철화안료로 사용한 석간주 연구

이재황,최석원,채상정,서만철 공주대학교 문화재보존과학연구소 2003 문화재과학기술 Vol.2 No.1

한국은 오랜기간 발전된 도자문화를 지니고 있다. 한국의 도예가들은 독창적인 문화를 토대로 활동적이며 예술적인 도자기를 생산해왔다. 14세기에 이르러 9세기의 고려청자를 바탕으로한 조선시대의 독특한 분청사기가 나타났으며 분청사기 가운데 철화분청사기는 백토분장위에 철분의 안료를 사용하여 붓으로 그림을 그려 제작하였다. 철화분청사기는 주로 15세기 후반부터 16세기 전반에 걸쳐 제작되었으며 이들은 민예적인 특성을 잘 반영하여 지역별로 서로 다른 독특한 양식으로 발달함으로써 계룡산 지역에서는 "계룡산 분청"이라는 별칭으로 불리었으나 현재는 철화분청사기의 제작기술이 소멸된 상태이다. 철화분청사기의 재현을 위해 철화분청사기편을 실험한 결과, 철화안료는 화강암내의 산화광물인 자철석으로 이루어져 있으며 이것은 석간주로 불리운다. 또한 철화분청사기편을 1230°C정도의 고온에서 소성한 결과 태토가 잘 견디었으며 사라진 광택이 다시 빛을 발하였다. 따라서 계룡산 분청의 재현 및 발전을 위해 문헌에 따른 채굴장소에 대한 연구가 이루어져야 할 것이다. Korea has a long and flourishing history of ceramics. Korean potters have established a dynamic artistic civilization rooted on its unique ceramic culture. In 14th century, they had created Buncheong, based on the tradtional Korean ceramics such as the Koryo celadons of 9th century. Among the Buncheongs, Chulhwa-Buncheong ceramics were produced by using iron oxide (ferric, ferrous) as the drawing stain. A fragment of a Chulhwa-Buncheong, with a manufacturing year stamp of 1492, was found in a kiln at mountain Kyeryong located in central Korea. Chulhwa-Buncheong ceramics, which have often abstract drawings on them, have been recognized worldwide for their artistic quality. But unfortunately, the production technique of Chulhwa-Buncheong has been lost. To provide the technical criteria for systematic restoration of Chulhwa-Buncheong, the iron oxide (ferric ferrous) material used for the drawings was explored. The iron oxide used for Chulhwa-Buncheong is the magnetite (Fe_(3)O_(4)). At 1230°C, it changes black color. With no flow effect at high plasticity level, it becomes dark color of chestnut and form ferrous crystal. As described in the Choseon Dynasty's memorandum of King Young Cho's period. the iron oxide was obtained traditionally from natural materials such as Seokanju, a special kind of minerals in granite. It is concluded that the magnetite from the rock cave which had been used as the drawing stain of Chulhwa-Buncheong can be used for the restoration of the Chulhwa-Buncheong.

개의 흉추 및 요추에서 배측 추궁절제술 1례

김명철,이재일,이수진,김종만,황학균,서지민,이영원,김덕환,신상태 충남대학교 수의과대학 동물의과학연구소 2000 動物醫科學硏究誌 Vol.8 No.-

In dorsal laminectomy for the surgical treatment of thoracolumbar disc disease in dog, the bur could slip into the vertebral canal. For the decrease of this probability of danger, osteotome was used with instruments such as bur and rongeur in dorsal laminectomy. At thoracic vertebrae (T10-T11) and lumbar vertebrae (L5-L6) area, dorsal laminectomys were performed in a dog. In observation for 3 months after surgery, the dog revealed healthy physical condition. For the confirmation of healing condition at 3 months after dorsal laminectomy, two surgical sites were exposed by incision. Excellent healing response was observed with no adhesion and fibrosis in the vertebral canal.

전기도금을 이용한 스테인레스스틸 각형 선재의 굵기 증가 후 물성 변화

이정석,황현식,최광철,문재동 전남대학교 치의학연구소 2002 구강과학 Vol.14 No.1

The purpose of this study was to evaluate clinical applications of electroplating method through investigation of the physical properties of orthodontic rectangular wires according to varying their cross section. For the study, it was accomplished to electroplate the 0.016-inched orthodontic rectangular stainless steel wire. The cross section of stainless steel orthodontic rectangular wire increased from 0.016 X 0.016 inch to 0.017 X 0.017 inch by electroplating. The wire was heat treated to improve an adhesion between the wire and electroplated metal. A three-point bending test and torsion test were conduced in order to compare physical properties among three wire groups; 0.016 X 0.016 wires(group 016P) and 0.017 X 0.017 wires(group 017). Through the investigations of each wire group, following results were obtained. 1. At three-point bending test, the group 016P showed higher tendency in the degree of stiffness, yield strength and ultimate tensile strength than the group 016. Stiffness and ultimate tensile strength showed statistically significant differences between two groups at three-point bending test(p<0.05). 2. Stiffness, yield strength, and ultimate tensile strength of the group 016P showed lower tendency than those of the group 017. Stiffness showed statistically significant differences between two groups at three-point bending test(p<0.05). 3. Torque/twist rate, yield torsional moment, and ultimate torsional moment of the group 016P showed higher tendency than those of the group 016. All measurements showed statistically significant differences between two groups after torsion test(p<0.05). 4. Torque/twist rate, yield torsional moment, and ultimate torsional moment of the group 016P showed lower tendency than those of the group 017. Yield torsional moment, and ultimate torsional moment showed statistically significant differences between two groups after torsion test(p<0.05). Xylitol is a 5-carbons carbohydrate, which can be replaced with sucrose for preventing caries. The replication of Streptococcus mutans and its formation of artificial plaque were studied in the media containing xylitol. The combined effect of xylitol and other carbohydrates on Streptococcus mutans was also studied. The replication of Streptococcus mutans was inhibited according to the increased concentration of xylitol. Streptococcus mutans replicated at the initial stage of incubation in the media contaning glucose, fructose or lactose, while replication from the beginning of incubation in the media containing fructose as combining with xylitol. The formation of artificial plaque by Streptococcus mutans was significantly reduced in the media containing with xylitol and fructose. These results indicated that the replication of Streptococcus mutans was inhibited according to the increased concentration of xylitol, and the formation of artificial plaque by Streptococcus mutans was significantly inhibited in the media containing xylitol and fructose.

HFCVD법을 이용하여 제작한 n-형 다이아몬드 박막의 특성 연구

김병규,황윤식,권민철,김용,이재열,박홍준 동아대학교 기초과학연구소 2000 基礎科學硏究論文集 Vol.17 No.1

HFCVD법으로 암모니아 가스를 사용하여 n-형 도핑된 다이아몬드 박막을 제작하여, 기판온도와 암모니아 가스 첨가비에 따른 박막의 morphology의 변화를 조사하였다. 증착된 시료에 대한 SEM, Raman, XRD를 이용하여 박막의 특성을 분석하고, 도핑에 따른 전계방출 특성을 측정하였다. 양질의 n-형 도핑된 다이아몬드 박막을 증착시키기 위해 기판온도와 암모니아 첨가비에 따른 최적의 증착조건을 찾을 수 있었다. We fabricate n-doped diamond thin films by hot filament chemical vapor deposition method(HFCVD) using ammonia as a doping gas and investigate the effect of the substrate temperature and the ammonia gas ratio upon the diamond film morphology. The SEM, Raman spectroscopy, and the XRD analysis are executed to characterize film morphology. Field emission property of the film is measured also. We find optimum conditions of the substrate temperature and the ammonia gas ratio to deposit high quality n-doped diamond thin films.

근관 전색재의 방사선 불투과성에 관한 비교연구

김태민,김서경,황인남,황윤찬,강병철,윤숙자,이재서,오원만 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.1

This study was performed to assess the radiopacity of a variety of root canal sealers according to the Specification concerning root canal sealers. Ten materials including Tubli-Seal™, Kerr Pulp Canal Sealer™, AH 26^(R), AH plus^(R), AH plus jet™, Ad seal™, Sealapex™, NOGENOU™, ZOB seal™, Epiphany™, and dentin were evaluated in this study. In the first part. densitometric reading of an each step of aluminum step wedge on occlusal film was performed at different voltage and exposure time. In the second part, ten specimens were radiographed simultaneously with an aluminum step wedges on the occlusal films under decided condition. The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (mm Al). The following results were obtained 1 Among the various conditions, the appropriate voltage and exposure time that meet the requirement density was 60 kVp at 0.2 s 2 All of the materials had greater radiopacity than 3 mm Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards. 3 The radiopacity of materials increased as thickness of materials increased. 4 The mm Al value of each specimen at 1mm in thickness has a significant difference in the statistics. It suggests that root canal sealers have a sufficient radiopacity that meet the requirement. 다양한 근관전색제는 방사선 사진상 주위 해부학적 구조와 구별될 만한 방사선 불투과성을 나타내야 한다 따라서 이런 물질들이 근관에 충전될 때의 방사선 불투과성 정도를 평가해야 할 필요성이 대두되고 있다. 본 실험에서는 다양한 근관전색제들의 방사선 불투과성을 평가하고자, 방사선 노출조건에 따른 aluminium step wedge에 대한 광학 밀도를 알아보고, 그 중 적절한 노출조건을 선택하여 수종의 근관 전색재의 방사선 불투과성 정도를 알루미늄 두께로 환산하여 비교해 보고자 한다. 방사선 불투과성의 기준을 위해 11개의 step으로 구성된 aluminum step wedge을 사용하여, 60kVP, 70kVp관전압 상태에서 각각 0.2, 0.3, 0.4초 그리고 0.2, 0.3, 0.33초의 꼭 노출시간으로 교합필름상에서 방사선 촬영후 적절한 노출 조건을 구하였다. 직경 5mm 각각의 두께 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm인 10종 (Tubli-Seal™, Kerr pulp Canal Sealer™, AH26^(R), AHplus^(R), AH plus jet starter kit™, Ad seal™, Sealapex™, Nogenol root canal sealer™, ZOB seal™, Epiphany™)의 근관전색재 시편을 각 재료와 두께당 10개씩 제작한 후, 동일한 두께의 상아질 시편, aluminum step wedge와 함께 정해진 노출시간에 따라 방사선 촬영을 하였다. 모든 필름은 자동현상기로 현상하였다. 시편의 방사선 흑화도를 densitometer로 5회 반복 측정 후, 평균값을 구하여 알루미눔 두께로 환산하였다.얻어진 정보를 분석하여 다음의 결과를 얻었다. 1 관전압 60 kVp에서 노출시간 0.2, 0.3, 0.4초, 70 kVp에서 0.2, 0.3, 0.33초로 변화를 주어 방사선 촬영을 하였을 때 흑화도가 ISO No. 6876 규격에 가장 적합한 것은 60 kVP, 0.2초 일 경우였다. 2 측정된 근관 전색제의 방사선 불투과성은 2.29 mm Al (N0GEN0L)로부터 13.69 mm Al (AH Plus jet)까지 다양하게 나타났으나, 모두 ANSI/ADA specification (2000) 또는 ISO No. 6876 (2001) 규격이 제시한 최소한 3mm Al 이상의 방사선 불투과성을 지녀야 한다는 기준에 적합하였다. 3 재료의 두께가 증가할수록 방사선 불투과성은 증가하지만, 정비례하지는 않았다. 4 각 실험재료의 1 mm 두께의 시편에 대한 mm Al값들은 통계적으로 유의한 차이가 있었다. 이상의 결과는 본 실험에 사용된 수종의 근관 전색재는 모든 규격에 적합한 방사선 불투과성을 가지고 있음을 시사한다.

Syntheses of the Z7Z11-16;Al and Z7Z11E13-16;Al, the Sex Pheromone of the Citrus Leafminer (CLM)

Jae-Ho Jeon,Koo Eon Cheol,Wan Cho Jung,Dong Ha Lee,Rok-Yeon Hwang,Jae-Wook Hyun 한국응용곤충학회 2015 한국응용곤충학회 학술대회논문집 Vol.2015 No.10

The Citrus Leafminer (CLM) larvae creates shallow tunnels in leaves of citrus (orange, mandarins, lemons, grapefruit, etc) and commonly attacks citrus young leaves. They spread almost worldwide (North America, Asia, Australia, etc) and difficult to control by chemicals due to their small size and their behavior of leaf rolling. Due to difficult of managing, our interest is preparing pheromone to control; Z7Z11-16;Al is known as the sex pheromone of this species in Japan. While blending Z7Z11-16;Al and Z7Z11E13-16;Al (3:1 ratio) is known as the pheromone of this insect in North America. Even though commercialized and mass produced already in overseas, there had been almost no report in Korea about synthetic studies and field screening results. The control of the regio-isomers is very important in this kind of pheromone synthesis. Our strategy is the regio-selective Wittig olefination reaction between E-pent-2-enyl(triphenylphsphonium)bromide (phosphonium salt) and the counterpart aldehyde using sodium hexamethyldisilazide (NaHMDS) as a base. All the spectroscopic data (1H, 13C, GC-Mass, etc) are nicely matched with the previously reported values. The field screening in the Jeju island is currently ongoing and will be reported.

Suppressive Effect of Curcuma Zedoaria Roscoe on Pulmonary Metastasis of B16 Melanoma Cells

Hwang Jae-Cheol,Kim Mi-Rang,Jung Young-Jae,Lee Young-Ja,Jung Wun-Suk,Seo Un-Kyo The Society of Korean Medicine 2005 대한한의학회지 Vol.26 No.1

Objective: We examined the antimetastatic effect of Curcuma zedoaria Roscoe (CZ) on pulmonary metastasis of B 16 cells. Methods: For 6 weeks, Zedoariae Rhizoma made from dried CZ were dissolved in distilled water and administered to mice 2 weeks before they were injected with B]6 melanoma cells. Mice were given CZ at doses of 250 and 500 mg/kg, and were compared for lung weight, survival days, and NO production. Results: Intake of CZ throughout the experiment extended the average survival time. Intake after B16 cell injection slightly prolonged survival time, but intake before B]6 cell injection did not influence life span. We examined the effect of CZ on macrophage function by measuring NO production. After the macrophages were given CZ for 6 weeks, the amount of NO generated by the macrophages stimulated with LPS in culture medium increased. NO generated by the macrophages also served as a cytotoxic factor against B16 melanoma cells. B16 melanoma-conditioned medium reduced NO production by macrophages. However, CZ treatment reversed the reduction in NO production by the conditioned medium significantly. Conclusion : These findings may suggest that macrophage function-modulating activity by CZ appears to underlie its antimetastatic activity, which leads to a decrease in the number of lung metastatic surface nodules and the extension of life span.