http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최광철,김경호,박영철,강창수 대한치과교정학회 2000 대한치과교정학회지 Vol.30 No.4
각형 호선이 edgewise 브라켓에 삽입되면 first, second order는 bending에 의해, third order는 torsion(비틀림)에 의해 3차원적인 force system이 발생한다. Bending에 관하여는 분석적 그리고 실험적인 많은 연구가 보고 되어 있는 반면 비틀림에 관해서는 상대적으로 많은 연구가 이루어 지지 않았다. 본 연구의 목적은 각형 와이어의 재료와 단면의 형태가 와이어의 비틀림 모멘트에 어떻게 영향을 주는지를 이론적, 실험적으로 밝혀서 임상적으로 적절한 모멘트를 가할 때 호선의 재료와 굵기를 합리적으로 선택할 수 있도록 하는데 있다. 실험재료로는 third order조절을 위해 가장 많이 사용하는 호선을 사용하였다. 크기별로 0.016×0.022, 0.017×0.025, 0.019×0.025인치 그리고 재료로는 stainless steel (Ormco), TMA (Ormco), NiTi (Ormco), 그리고 braided stainless steel (DentaFlex, Dentaurum) 네 가지를 사용하여 총 12개의 조합을 사용하였다. Torsion formula를 이용하여 비틀림 강성 (toraue/twist rate)를 계산하였고 torque gauge를 이용하여 비틀림 강성, 항복 비틀림 모멘트 (yield torsional moment), 그리고 최대 비틀림 모멘트 (ultimate torsional moment)를 측정하였다. Torsion formula에 의하면 비틀림 강성 (T/θ)은 재료적인 특성(G)과 호선의 단면의 특성(J)에 비례하고 호선의 길이(L)에 반비례한다. 대부분의 실험치는 이론적인 값과 비슷하게 나타났다. As a rectangular wire is inserted into edgewise brackets the wire exerts a force system three-dimensionally. The force system may include bending force in first and second orders and a torsional force in third order. Analytical and experimental studies on bending force have been introduced, but information about torsion is still lack. The purpose of this study was to estimate the torsional moment in the force system of rectangular arch wires through theoretical and experimental studies. Wires most frequently used for third order control were selected as study materials. Cross sections of 0.016×0.022, 0.017×0.025, 0.019×0.025 inch rectangular wires in four different materials such as stainless steel (Ormco), TMA (Ormco), NiTi (Ormco), and braided stainless steel (DentaFlex, Dentaurum) were used. The torque/twist rate of each test material was calculated using the torsion formula. Torque/twist rate, yield torsional moment, and ultimate torsional moment were measured with a torque gauge. The torsion formula assesses that the torque/twist rate (T/θ) is proportional to the characteristics of material (G) and cross section (J), and is inversely proportional to the length of wire (L) Most experimental results corresponded with the formula. The relative stiffness was calculated for reference to a logical sequence of wire changes.
최광철,김선일,이두수,Choi, Kwang-Cheol,Kim, Sun-Il,Lee, Doo-Soo 대한의용생체공학회 1992 의공학회지 Vol.13 No.1
A new approach to texture classification for quantitative ultrasound liver diagnosis using run difference matrix was developed. The run difference matrix comprised the gray level difference along with a distances. From this run difference matrix, we defined several vectors and parameters such as DOD, DGD, DAD vector, SHP, SMO, SMG, LDE, LDEL etc. Each parameter values calculated in fatty, cirrhotic, normal and chronic hepatitic liver images were plotted in a plane and we found that RDM method was more sensitive to small structural changes than the conventional run length method and showed improved classification ability between the diseases.
최광철,김경호,박영철,한정윤 대한치과교정학회 2001 대한치과교정학회지 Vol.31 No.1
원하는 형태의 치아이동을 얻기 위해서는 M/F(Moment/Force) ratio의 조절이 필요하며, 이를 위해서는 치아의 저항중심의 위치를 아는 것은 매우 중요한 일이다. 본 연구에서는 실제 치아주위 환경을 비교적 유사하게 재현할 수 있는 치조골상과 치아의 이동을 시뮬레이션하는 장치를 제작하고, LVDT를 이용한 3차원 운동을 실시간으로 측정할 수 있는 시스템을 사용하여, 힘에 대한 3차원 공간상에서의 치주인대 응력 분포 양상 및 치아 저항중심과 회전축의 위치변화를 계측한 결과 다음과 같은 결론을 얻었다. 1.상악 견치에 원심방향으로 힘을 가했을 때, 치아의 저항중심의 위치는 힘의 크기와는 무관하였으며, 치근의 치경부측 약 29% 부위에 위치하였다. 이는 2차원 모형(42%) 보다 치관 쪽에 위치한다. 2.모멘트만 가하는 경우 치아의 저항중심과 회전축은 일치하였다. 3.치아에 가해지는 모멘트가 증가하는 경우 방향에 관계없이 치아는 정출되는 경향을 보였다. 4.힘이 가해지는 위치, 저항중심, 회전축간에는 일정한 관계가 성립했다(a×b = 49.6mm2). 이 관계식을 통해서 수평력이 가해질 때 예상되는 치아운동 양상을 알 수 있다. 5.수평력이 가해질 때 회전축의 위치는 일직선으로 나타난다. In order to achieve a desirable tooth movement, it is of great importance to control the M/F ratio and to know the location of the center of resistance. The purpose of this study was to locate the center of resistance and the axis of rotation, and to estimate the stress distribution in the periodontal ligament with experimental model. After preparing a model of an upper canine with a simulated periodontal ligament and alveolar bone, the force and moment were applied. The tooth movement was traced using measuring device with LVDTs(Linear variable differential transformers) that can measure three dimensional tooth movement in real time. The results were as follows. 1.The location of center of resistance by transverse force was 29% of root length measured from alveolar crest to apex regardless of force magnitude. The position of the center of resistance is more coronal than that of two-dimensional model(42%). 2.The center of resistance and the axis of rotation coincide when couple moment was applied. 3.As the magnitude of moment increases, tooth tends to extrude irrespective of the direction of the moment. 4.The relationship between location of force and axis of rotation (a x b =49.6mm2) was obtained. A tooth movement can be predicted through this formula. 5.The centers of rotation by transverse force were plotted linearly.