시설노인의 자아존중감과 우울

박금자,이지현,배경의,강양희,송후승 노인간호학회 2007 노인간호학회지 Vol.9 No.1

Purpose: The purpose of this study was to identify levels of self-esteem and depression in the elders who are residents in welfare facilities and to provide basic data for developing nursing intervention programs for these people. Methods: The participants in this study were 192 older people who scored 24 or higher on the K-MMSE (Korean-Mini Mental State Examination), and have lived for three months or more in one of 4 institutions located in B Metropolitan City. The data were collected by structured questionnaire from August 1 to 20 2006 and frequency, percentage, mean and standard deviation, and Pearson correlation coefficient were used to analyze the data with the SPSS/12.0 program. Results: 1. The score for self-esteem of the participants was 33.70± 7.20 (tool range: 10-50), and for depression, 6.57±3.98 (tool range: 0-15). 2. There was a slightly negative correlation between self-esteem and depression (r=-.388, p=.000). 3. There were significant differences in self-esteem according to education level (F=4.486, p= .012), and level of intention to be admitted to facility (F=7.504, p=-.000). 4. There was significant difference in depression according to education level (F=3.832, p=.023), type of religion (F=3.837, p= .005), level of intention to be admitted to facility (F=7.987, p=.000). Conclusion: This study might help in developing nursing intervention programs to improve self-esteem and reduce depression these elders.

농산물중의 잔류농약 실태에 관한 연구(Ⅰ) : 고체상 추출에 의한 농산물중 잔류농약 분석에 관한 연구 Analysis of Residual Pesticides in Agricultural Products by Solid-Phase Extraction

허옥순,이재관,이정성,서정혁,주인선,허수정,김세은,김정근,신영희,유미자,김지연,심규창,김성환 식품의약품안전청 1998 식품의약품안전청 연보 Vol.2 No.-

신속 · 정밀하고 효율적인 짠류농약 검출을 위하여 극싱칼럼 (Extrelut-3')을 사옹한 SPE법을 시도하였다. 시료는 채소류체 사용하는 농약중 잔류성이 있고 식품공전상 시험 전처리가 각각 다른 Chlorothalonil등 6종의 농약을 선정하고 그들 표준액에 대한 PPIR수준의 농도로추출용라의 종류 및 용매량 등의 추출조건을 달리하여 회수율 등을 측정한 결과 최적의 분석조건을 얻었다. 1) 추출 용매량은 증가할수록 추출 수율이 높았고,용매 종류에 대한 추출수율은 각 농약별로 다소 차이는 있었으나 극성 정도가 비교적 높은 Ethyl acetate애서 평균 추출수율이 가장 높았다 2) 최대 평균회수율은 Ethyl acetate 60mL를 사웅할 경우로서 93.6%였다. 3)표준액을 시료에 첨가한 시험에서도 역시 Ethyl ace늘to가 푼출수율이 가장 높았으며 불순물 분리제거 효과도 LLE법 보다 월등히 우수하였다. 4) 각 농약별 검출한계는 치소 0.001ppin으로 농산물 중 미량 잔류하는 농약을 검출할 수 있을 것으로 사료된파. 그러므로 SPE법은 LLE법보다 경제적인 방법으로 판명되었으며, 앞으로 농산물 중 잔류농약 분석에서 LEE법을 대치할 쑤 있을 것으로 기대된다. Solid-phase extraction by polar column(Extrelut-3') was attempted to develope the fast and efficient method of detecting pesticide of farm product.5·ix kinds of pesticide used in farming fieldfrequently and different in pretreatment, were chosen from Korea Food Cord. Optfmal analysis condi-tions were determiBed from t31e recovery rate of standard pesticides according to extraction solvent andextraction volurae. Extraction yietd was increased as solvent polarity and extraction volume. Maximumrecovery rate was acquired at 93.6% when 60mL of ethyl acetate was used as eluent. Tllis method wasmore effective than liquid-liquid partition extract·ion method to eliminated the impurity and had 0.001ppm of detection limit. Therefore. solid-phase eEl=raction was expected to be economical substitute fortraditional liquid-liquid extT·action method.

흰쥐에 對한 Phosphamidon 및 Endosulfan의 亞急性毒性에 關한 硏究

申鎭燮,崔承允,李昌業,崔仁厚 서울大學校 農科大學 1984 서울대농학연구지 Vol.9 No.2

Subacute toxicity tests of phosphamidon and endosulfan were carried out to examine the adverse effects resulting from repeated daily oral administration of low dose levels (1, 2 and 5 mg/kg/day) to rats for 28 days. The results were summarized as follows: 1. Rats showed clinical signs of salivation hyperactivity, ataxia at 2mg/kg/day dosage of phosphamidon and, in addition, lachrymation, tremor, exophthalmus and diarrhea at the highest level. On the other hand, endosulfan caused only hyperactivity in rats treated with the highest dosage. There was no mortality at any dosage of either pesticide. 2. Rats gained significantly lower body weight, when treated at the 5mg/kg/day dose levels of phosphamidon and endosulfan, in comparison to normal, nontreated rats. 3. Plasma cholinesterase activity was significantly depressed at all levels of phosphamidon during the administration period, but returned to normal within 2 weeks after the last administration. Endosulfan did not change plasma cholinesterase activity at any levels. 4. Leukopenia was detected only in rats treated with phosphamidon at 5mg/kg/day level. No other adverse changes in hematology were observed in rats treated either with phosphamidon at lower levels or with endosulfan at any levels. 5. Cloudy swelling of liver was the only histological change in rats treated with phosphamidon or endosulfan at the highest level. No other histopathological change in rats treated with phosphamidon or endosulfan at the highest level. No other histopathological symptoms were found in spleen, heart, kidney, and bone marrow of rats treated. 6. It may be concluded from the results above that the "no effect level" is 1 mg/kg/day and 2 mg/kg/day for phosphamidon and endosulfan, respectively.

3차원 전산화단층촬영 영상을 이용한 얼굴 연조직 두께 계측

정호걸,김기덕,한승호,신동원,허경석,이제범,박혁,박창서 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.37 No.1

Purpose : To evaluate accuracy and reliability of program to measure facial soft tissue thickness using 3D computed tomographic images by comparing with direct measurement. Materials and Methods : One cadaver was scanned with a Helical CT with 3 mm slice thickness and 3 mm/sec table speed. The acquired data was reconstructed with 1.5 mm reconstruction interval and the images were transferred to a personal computer. The facial soft tissue thickness were measured using a program developed newly in 3D image. For direct measurement, the cadaver was cut with a bone cutter and then a ruler was placed above the cut side, The procedure was followed by taking pictures of the facial soft tissues with a high-resolution digital camera. Then the measurements were done in the photographic images and repeated for ten times. A repeated measure analysis of variance was adopted to compare and analyze the measurements resulting from the two different methods. Comparison according to the areas was analyzed by Mann-Whitney test. Results : There were no statistically significant differences between the direct measurements and those using the 3D images (p>0.05). There were statistical differences in the measurements on 17 points but all the points except 2 points showed a mean difference of 0.5 mm or less. Conclusion : The developed software program to measure the facial soft tissue thickness using 3D images was so accurate that it allows to measure facial soft tissues thickness more easily in forensic science and anthropology. (Korean J Oral Maxillofac Radiol 2006; 36 : 49-54)

3차원 전산화단층촬영 영상을 이용한 안면 연조직 두께 계측의 임상적 유용성

정호걸,김기덕,한승호,허경석,이제범,박혁,최성호,김종관,박창서 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.36 No.2

Purpose : To evaluate clinical usefulness of facial soft tissue thickness measurement using 3D computed tomographic images. Materials and Methods : One cadaver that had sound facial soft tissues was chosen for the study. The cadaver was scanned with a Helical CT under following scanning protocols about slice thickness and table speed; 3 mm and 3 mm/sec, 5 mm and 5 mm/sec, 7 mm and 7 mm/sec. The acquired data were reconstructed 1.5, 2.5, 3.5 mm reconstruction interval respectively and the images were transferred to a personal computer. Using a program developed to measure facial soft tissue thickness in 3D image, the facial soft tissue thickness was measured. After the ten-time repeation of the measurement for ten times, repeated measure analysis of variance (ANOVA) was adopted to compare and analyze the measurements using the three scanning protocols. Comparison according to the areas was analyzed by Mann-Whitney test. Results : There were no statistically significant intraobserver differences in the measurements of the facial soft tissue thickness using the three scanning protocols (p>0.05). There were no statistically significant differences between measurements in the 3 mm slice thickness and those in the 5 mm, 7 mm slice thickness (p>0.05). There were statistical differences in the 14 of the total 30 measured points in the 5 mm slice thickness and 22 in the 7mm slice thickness. Conclusion : The facial soft tissue thickness measurement using 3D images of 7 mm slice thickness is acceptable clinically, but those of 5 mm slice thickness is recommended for the more accurate measurement.

Frequency of Metabolic Syndrome in Female Patients with Systemic Sclerosis: A Preliminary Report

Seung Geun Lee,Ji Min Kim,Sun Hee Lee,Kye Hyung Kim,Sang A Choi,Eun Kyoung Park,Woo Jin Jung,Young Eun Park,Seong Hu Park,Joung Wook Lee,Seung Hoon Baek,Jun Hee Lee,Geun Tae Kim 대한류마티스학회 2012 대한류마티스학회지 Vol.19 No.5

Local and Nonlocal Fraunhofer-like Pattern from an Edge-Stepped Topological Surface Josephson Current Distribution

Lee, Jae Hyeong,Lee, Gil-Ho,Park, Joonbum,Lee, Janghee,Nam, Seung-Geol,Shin, Yun-Sok,Kim, Jun Sung,Lee, Hu-Jong American Chemical Society 2014 NANO LETTERS Vol.14 No.9

<P>We report a surface-dominant Josephson effect in superconductor–topological insulator–superconductor (S–TI–S) devices, where a Bi<SUB>1.5</SUB>Sb<SUB>0.5</SUB>Te<SUB>1.7</SUB>Se<SUB>1.3</SUB> (BSTS) crystal flake was adopted as an intervening TI between Al superconducting electrodes. We observed a Fraunhofer-type critical current modulation in a perpendicular magnetic field in an Al–TI–Al junction for both local and nonlocal current biasing. Fraunhofer-type modulation of the differential resistance was also observed in a neighboring Au–TI–Au normal junction when it was nonlocally biased by the Al–TI–Al junction. In all cases, the Fraunhofer-like signal was highly robust to the magnetic field up to the critical field of the Al electrodes, corresponding to the edge-stepped nonuniform supercurrent density arising from the top and rough side surfaces of the BSTS flake, which strongly suggests that the Josephson coupling in a TI is established through the surface conducting channels that are topologically protected.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/nalefd/2014/nalefd.2014.14.issue-9/nl501481b/production/images/medium/nl-2014-01481b_0005.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/nl501481b'>ACS Electronic Supporting Info</A></P>

Reliability Evaluation of an Oil Cooler for a High-Precision Machining Center

Lee, Seung-Woo,Han, Seung-Woo,Lee, Hu-Sang Korean Society for Precision Engineering 2007 International Journal of Precision Engineering and Vol.8 No.3

Improving the reliability or long-term dependability of a system requires a different approach from the previous emphasis on short-term concerns. The purpose of this paper is to present a reliability evaluation method for an oil cooler intended for high-precision machining centers. The oil cooler system in question is a cooling device that minimizes the deformation caused from the heat generated by driving devices. This system is used for machine tools and semiconductor equipment. We predicted the reliability of the system based on the failure rate database and conducted the reliability test using a test-bed to evaluate the life of the oil cooler. The results provided an indication of the reliability of the system in terms of the failure rate and the MTBF of the oil cooler system and its components, as well as a distribution of the failure mode. These results will help increase the reliability of oil cooler systems. The evaluation method can also be used to determine the reliability of other machinery products.

An Observation of Micro-crack in Transformation-induced Plasticity-assisted Multiphase Steel

Lee, Seung Hyun,Lee, Sang Hoon,Kang, Suk Hoon,Han, Heung Nam,Oh, Kyu Hwan,Lee, Hu-Chul The Iron and Steel Institute of Japan 2008 ISIJ international Vol.48 No.10

<P>In a transformation-induced plasticity (TRIP)-assisted multiphase steel, the phases around a micro-crack at the initial stage of cracking during wire drawing were observed by a focused ion beam (FIB), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS). A novel FIB method, which is termed as “In-plane lift-out” technique, was applied to obtain an overall plan-view of the TEM specimen containing the micro-crack. The equilibrium concentration ratio of Mn in austenite and ferrite was calculated for the alloy and compared with the EDS line profile of Mn concentration across the micro-crack in the TEM specimen. The interface between the ferrite and martensite was identified as the crack initiation site during drawing of this multi-phase steel.</P>

A Study on the Effects of Ultrasonic Vibration in Laser Machining of Polymer Materials

Hu Seung Lee,Jung Hwan Park,Min Yang Yang,Jong Kweon Park,Sung Hak Cho 한국생산제조학회 2012 한국생산제조시스템학회 학술발표대회 논문집 Vol.2012 No.10