http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
휘발성 유기화합물 측정을 위한 전도성고분자 센서의 감응기구에 관한 연구
황하룡,백지흠,허증수,이덕동,임정옥,이준영,Hwang, Ha-Ryong,Baek, Ji-Heum,Heo, Jeung-Su,Lee, Deok-Dong,Im, Jeong-Ok,Lee, Jun-Yeong 한국재료학회 2001 한국재료학회지 Vol.11 No.7
전도성 고분자인 poupyrrole과 polyaniline을 이용하여 센서를 제조하고 휘발성 유기화합물에 대한감응특성 및 감지막의 물성을 조사하여 지금까지 알려지지 않은 감응 기구를 설명하고자 하였다. Polypyrrole과 polyaniline은 두께가 얇은 경우가 두꺼운 경우보다 감도가 높았으며, 1분간 도펀트를 제거한 센서가 가장 높은 감도를 나타내었다. 또한 두 가지 센서 모두 극성이 강한 분자가 흡착될수록 감도가 증가하였는데, 이는 극성을 갖는 분자가 감지막 내부로 침투하여 polaron 및 자유 carrier를 고착시키거나 추가의 자유 carrier를 형성하여 전도도에 변화를 주기 때문인 것으로 판단된다. In this study, we fabricated chemically polymerized PPy and PANi films with different selectivity by controlling dedoping time. And the sensing properties and mechanism of VOCs adsorption to conducting polymers were investigated. Thin sensor had higher sensitivity compared to thick one, and dedoped sensor for 1-minute highest sensitivity. Upon gas absorption, polypyrrole exhibited positive sensitivity while polyaniline had negative sensitivity. PPy film show hydrophilic property and PANi film show hydrophobic property. After the gas absorption, the sensitivity increased as a function of polarity of absorbed molecules. These behaviors are due to the polar molecules absorbed with the movable polaron or free carrier, and then it interrupt or generate the movement of polaron and carrier, and then it changes the conductivity of polymer. We found that conducting polymer sensors are very sensitive to the difference in polarity of gas molecules.
Electrochromic 막의 특성과 물질이동 방지막의 효과에 대한 연구
황하룡(H. R. Hwang),백지흠(J. H. Paik),허증수(J. S. Huh),이덕동(D. D. Lee),임정옥(J. O. Lim),장동식(D. S. Jang) 한국진공학회(ASCT) 2000 Applied Science and Convergence Technology Vol.9 No.3
졸겔법 및 진공증착법으로 WO₃ 및 V₂O_5 박막을 제조하고, 리튬이온을 이용하여 전기변색 소자를 제작한 후 광학적 특성을 조사하였다. 측정결과 졸겔법으로 제조된 WO₃ 박막과 V₂O_5 박막을 수증기 분위기에서 500℃로 1시간 열처리한 경우 가장 우수한 투과율 변화량을 나타내었다. 정ㆍ역방향 동작을 거듭할수록 WO₃ 막의 텅스텐과 ITO막의 인듐이 상호 확산하는 것을 관찰할 수 있었으며, 이를 방지하기 위해 수백 Å의 텅스텐 박막을 ITO와 WO₃막 사이에 삽입한 결과, cyclic voltamogram의 peak의 감소량이 1/10 이하로 감소하였으며, 리튬이온의 흐름에 의한 인듐과 텅스텐의 이 동을 효과적으로 방지할 수 있었다. After manufacturing the electrochromic device (structure: ITO glass/WO₃/electrolyte/V₂O_5/ITO glass) by using of sol-gel process and evaporation, optical properties and migration effect were investigated. The result shows that electrochromic device with heat treated (at water vapor ambient, 500℃, 1 hour) sol-gel coated WO₃ and V₂O_5 films had the highest transmittance variance. Electrochromic devices are based on the reversible insertion of guest atoms into structure of the host solid. But after cyclic operation, we find that the tungsten in WO₃ film and the indium in ITO film were migrated with each other. For the purpose of blocking migration, tungsten barrier film is inserted between ITO and WO₃ film. The result of cyclic voltamogram and the Auger depth profile show that the peak separation of cyclic voltamogram is reduced to below 1/10 and we could effectively block the indium and tungsten migration that is caused by flow of Li ions.
휘발성 유기 화합물 가스 측정을 위한 전도성 고분자 센서의 제조 및 감응 특성
백지흠,황하룡,노진규,허증수,허덕동,임정옥,변형기 한국센서학회 2001 센서학회지 Vol.10 No.2
Conducting polymer sensors show high sensitivity when exposed to volatile organic compounds gases at room temperature. The 8 sensor array using by polypyrrole and polyaniline has been fabricated by chemical polymerization for measuring sensing characteristics of VOCs gases. Conducting polymer was polymerized by using distilled pyrrole, aniline as a monomer and ammonium persulfate (APS) as an oxidant and dodecylbenzene sulfonic acid (DBSA) as a dopant. Dedoped film was synthesized by reverse voltage and redoped film was synthesized by using 1-octanesulfonic acid sodium salt as another dopant in electrochemical cell. The sensitivity and reversibility were influenced by doping, dedoping, redoping and thiclrness for the polypyrrole and polyaniline. We investigated the relation between the structure of conducting polymer and sensitivity of these sensors through the analysis of scanning electron microscope (SEM), scanning probe microscope (SPM) and α-step.
권영대,박주철,정동수,황하룡,박상훈,김선근 한국경영과학회 1998 한국경영과학회 학술대회논문집 Vol.- No.1
조선 일정계획 시스템에서 부하분석 영역은 현재의 시스템에서 생성된 일정을 관리한다는 측면에서 중요한 역할을 가진다. 일정이 생산현장의 상황과 능력에 맞게 정해지지 않으면 지켜질 수 없는 일정이 되고 마는 까닭이다. 따라서 부하의 분석은 각 작업장이 가지는 처리중량, 보유공수 등 여러가지 능력한계에 대한 비교 기능, 작업일정의 조정을 위한 장기분석 기능과 특수블럭 및 스톡장 등에 대한 분석기능을 포함하고 있어야 한다. 뿐만 아니라 부하분석 프로그램에서는 있을 수 있는 기업내 조직의 변경에 대처할 수 있는 기능을 지니고 있어야 한다. 사용자에 의해 조직의 편집 및 수정이 가능하지 않으면 프로그램 소스의 변경이 불가피하기 때문이다. 기업의 상황과 생산성 향상을 위해 기업내 조직 변경의 가능성은 항상 존재하며, 이러한 변경은 프로그램 상에서 표현되는 부하 상황에 영향을 끼치게 된다. 본 고는 조선 일정계획 시스템의 한 모듈로 부하분석과 조직변경에 대처할 수 있는 부하분석 하부 시스템을 개발한 결과를 다룬다. 실제 작업장에 걸리는 부하의 처리를 위한 부하보기 및 조직도 처리와 연계, 장기분석 데이타의 검토를 위한 장기부하분석, 특수블럭 및 스톡장 부하보기 등의 내용이 포함된다. 시스템 개발은 Windows-NT 클라이언트-서버 환경을 기반으로 MS-SQL 데이타베이스와 비주얼 C++ 을 이용하여 이루어진다.
전도성 고분자 센서 어레이를 이용한 휘발성 유기 화합물 가스 인식
이경문,주병수,유준부,황하룡,이병수,이덕동,변형기,허증수 한국센서학회 2002 센서학회지 Vol.11 No.5
휘발성 유기 화합물 가스(Volatile Organic Compounds)를 인식하고 분석하기 위하여 전도성 고분자 센서어레이를 이용한 시스템을 제작하였다. Polypyrrole와 Polyaniline을 화학중합법으로 센서에 전도성고분자막을 형성하였고 이를 통해 VOC 검지용 센서 어레이를 제작하였다. 센서어레이로부터 측정되는 다차원 데이터는 주성분분석법(PCA)과 RBF(Radial Basis Function Network)을 이용하였다. 제안된 시스템으로 VOCs 가스를 인식하는데 있어서 RBF Network이 PCA방식보다 더욱 효율적인 것으로 판단되었다. We fabricated gas recognition system using conducting polymer sensor array for recognizing and analyzing VOCs(Volatile Organic Compounds) gases. The polypyrrole and polyaniline thin film sensors which were made by chemical polymerization were employed to detect VOCs. The multi-dimensional sensor signals obtained from the sensor array were analyzed using PCA(principal component analysis) technique and RBF(radial basis function) Network. Throughout the experimental trails, we confirmed that RBF Network is effective than PCA technique in identifying VOCs.