http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
p-Pillar 영역의 두께와 농도에 따른 4H-SiC 기반 Superjunction Accumulation MOSFET 소자 구조의 최적화
정영석,구상모,Jeong, Young-Seok,Koo, Sang-Mo 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.6
In this work, static characteristics of 4H-SiC SJ-ACCUFETs were obtained by adjusting the p-pillar region. The structure of this SJ-ACCUFET was designed by using a two-dimensional simulator. The static characteristics of SJ-ACCUFET, such as the breakdown voltages, on-resistance, and figure of merits, were obtained by varying the p-pillar doping concentration from $1{\times}10^{15}cm^{-3}$ to $5{\times}10^{16}cm^{-3}$ and the thickness from $0{\mu}m$ to $9{\mu}m$. The doping concentration and the thickness of p-pillar region are closely related to the break down voltage and on-resistance and threshold voltages. Hence a silicon carbide SJ-ACCUFET structure with highly intensified breakdown voltages and low on-resistances with good figure of merits can be achieved by optimizing the p-pillar thickness and doping concentration.
표면조도를 가지는 볼록한 면에 충돌하는 제트에 의한 열전달계수 측정
정영석,이대희,이준식,Jeong, Yeong-Seok,Lee, Dae-Hui,Lee, Jun-Sik 대한기계학회 1998 大韓機械學會論文集B Vol.22 No.3
The local Nusselt numbers have been measured for a round turbulent jet impinging on the convex surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured to within .+-.0.25 deg. C accuracy using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 6 to 10, the dimensionless surface curvature (d/D) 0.056, and the various rib types (height(d$_{1}$) from 1 to 2 mm, pitch (p) from 6 to 32 mm). It was found that the average Nusselt numbers on the convex surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface. In addition, we compared the results by the steady-state method using the gold-film Intrex with those by the transient method.
정영석,임석희,조규식,오승협,Jeong, Yeong-Seok,Im, Seok-Hui,Jo, Gyu-Sik,O, Seung-Hyeop 한국천문학회 2012 天文學會報 Vol.37 No.2
발사체 추진기관은 추진제 및 각종 고압가스류를 엔진으로 공급하는 기능, 지상에서 추진제를 발사체로 충전/배출하는 기능, 저온 산화제를 냉각하기 위한 순환 기능, 추진제 탱크를 가압하는 기능, 지상에서 온보드 밸브를 구동하는 기능, 내부 공간 및 라인 퍼지 기능 등을 수행한다. 이와 같은 기능을 수행하기 위해 발사체에는 타 시스템과는 별도로 추진기관 원격제어 시스템을 구성한다. 제어 시스템은 크게 온보드 시퀀스 및 추진제 탱크 압력 제어, 추진제 및 고압가스 충전/배출 제어, 발사체 기능 확인, 내부 기밀 확인 및 발사 직전까지의 상태 모니터링을 위해 구성한 지상측정시스템(GMS), 비행 중 추진기관 상태를 모니터링하기 위한 텔레메트리시스템(TMS)으로 분류한다. 본 논문에서는 일반적인 발사체 추진기관 운용 및 제어 개념을 제어 기능, 시스템 구성, 작동 원리의 단계로 사례와 함께 제시하였다.
용액 공정으로 형성된 n-ZTO/p-SiC 이종접합 열처리 효과
정영석,구상모,Jeong, Young-Seok,Koo, Sang-Mo 한국전기전자재료학회 2015 전기전자재료학회논문지 Vol.28 No.8
We investigated the effects of annealing on the electrical and thermal properties of ZTO/4H-SiC heterojunction diodes. A ZTO thin film layer was grown on p-type 4H-SiC substrate by using solution process. The ZTO/SiC heterojunction structures annealed at $500^{\circ}C$ show that $I_{on}/I_{off}$ increases from ${\sim}5.13{\times}10^7$ to ${\sim}1.11{\times}10^9$ owing to the increased electron concentration of ZTO layer as confirmed by capacitance-voltage characteristics. In addition, the electrical characterization of ZTO/SiC heterojunction has been carried out in the temperature range of 300~500 K. When the measurement temperature increased from 300 K to 500 K, the reverse current variation of annealed device is higher than as-grown device, which is related to barrier height in the ZTO/SiC interface. It is shown that annealing process is possible to control the electrical characteristics of ZTO/SiC heterojunction diode.
정영석(Young-Seok Jeong),전지연(Ji-Yeon Jeon),백지예(Jo-Ye Baek),오용철(Youg-Chul Oh) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.2
기업의 아이디어 산실이며 중요 결정이 이루어지는 회의실은 평상시 출입의 보안이나 공동사용의 측면에서 관리가 필요하다. 하지만 대부분의 회의실 예약은 회의실의 수용인원이나 설치된 장비 및 사용자의 인원이나 요구 장비에 크게 상관하지 않는 비효율적인 선점형(FCFS) 방식을 따르고 있으며 예약을 관리부에 가서 예약대장에 직접 작성해야 하는 불편함이 있다. 또한 웹을 이용한 예약시스템은 회의 참여자에 대한 정보 없이 단순히 예약사항만을 보여준다. 본 논문에서는 이러한 단점을 개선하기 위해서 유비쿼터스 시대에 핵심 기술인 RFID와 편리하게 접근 가능한 웹을 이용하여 효율적이고 편리한 솔루션을 설계 및 구현하였다.
PVA-ECC에 의해 피복 보강된 RC보의 비틀림 거동에 대한 연구
정영석 ( Yeong Seok Jeong ),권민호 ( Min Ho Kwon ),서현수 ( Hyeon Soo Seo ),김진섭 ( Jin Sup Kim ),김기영 ( Gi Yeong Kim ) 한국복합신소재구조학회 2015 복합신소재학회논문집 Vol.6 No.1
The need to consider torsion in the design of members of a structure has recently been increasing; therefore, many studies on torsion have been carried out. Recent research was focused on the torsional performance of concrete according to the reinforcing materials used. Of particular interest, are torsion studies of beams made of SFRC(steel fiber reinforced concrete), and there has been increasing use of SFRC at construction sites. In contrast, research on the composite PVA-ECC (polyvinyl alcohol-engineered cementitious composite) has only covered its mechanical performance, though it exhibits excellent tensile-strain performance (better than SFRC). Therefore, research on the torsion of concrete beams retrofitted using PVA-ECC is lacking. In this study, the behavior characteristics and performance of reinforced-concrete beams retrofitted by PVA-ECC was investigated experimentally. The experimental results show that the resistance to torsional cracking is increased by PVA-ECC. In addition, the strain on the rebar of the specimen was found to be reduced.
교량의 긴급 지진안전성 평가기술(II): 안전성 평가 알고리즘 개발
정영석 ( Jeong Yeong-seok ),권민호 ( Kwon Min-ho ),김진섭 ( Kim Jin-sup ),김상우 ( Kim Sang-woo ) 한국구조물진단유지관리공학회 2019 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.23 No.2
과거 지진가속도계측기는 “지진·화산재해대책법” 제6조, 제7조에 따라 2010년 고시된 “지진가속도계측기 설치 및 운영기준”에 의거 시설물 관리주체가 설치 및 운영 되었다. 하지만 시설물 관리주체에서는 구조물별 가속도 관측을 수행하고 있으나 지진 발생 시, 이를 활용하지 않거나 최대 가속도 데이터만 저장, 이용하고 있는 실정으로 데이터의 활용도를 제고할 수 있는 방안 마련의 필요성이 제기되었다. 따라서 “지진가속도 응답신호를 활용한 공공시설 안전관리 기술개발” 연구를 통해서 지진가속도 응답신호 종합분석 시스템이 개발되었다. 하지만 안전성평가를 위한 연구는 “지진가속도계측기 설치 및 운영기준” 제9조에서 정의하는 9개항의 시설물 중 건축물에 해당하는 시설물에 제한적으로 적용되었기에 추가적인 연구가 필요한 실정이다.
정영석(Youngseok Jeong),김형재(Hyoungjae Kim),정해도(Haedo Jeong) 대한기계학회 2003 대한기계학회 춘추학술대회 Vol.2003 No.4
The friction heat generated by the CMP process hasinfluence on removal rate and WIWNU(Within Wafer Non-Uniformity). Therefore, the object of this study in to find the distribution of temperature on pad surface during CMP process. To do this, the authors analyse the kinematics of CMP equipment to verify the sources of friction heat and compare the analysis result with the experimental results. Through the analysis and experiment conducted in this paper, we can predict the distribution of polishing temperature across the pad surface. Furthermore the result could help to predict the process conditions which could enhance the polishing results, such as WIWNU and removal rate of thin film to achieve more effcient process.