매립지 온실 가스 배출량 산정을 위한 IPCC 선정방법별 특성 연구

정성훈,황현욱,김명균,엔짜오쩡,느지오카 안토니 무투아,티네가 조셉 냐모코,김영주,Jung, Sung Hoon,Hwang, Hyeon Uk,Kim, Myung Gyun,Yan, Cao Zheng,Nzioka, Antony Mutua,Tinega, Joseph Nyamoko,Kim, Young Ju 한국자원리싸이클링학회 2016 資源 리싸이클링 Vol.25 No.5

본 연구에서는 매립 처리시설를 대상으로 1996 IPCC G/L에 제시된 Tier 1 방법과 GPG 2000의 Tier 2 방법, 2006 IPCC G/L의 Tier 2 방법을 이용하여 매립시설에서 발생되는 온실가스 배출량을 산정하였으며 각 방법론 별로 적용상의 장단점 및 배출결과에 영향을 주는 요인과 산정된 배출량의 특성을 고찰하였다. 온실가스 배출량을 산정한 결과 1996 IPCC G/L Tier 1의 배출량은 2000 ~ 2013년 기간 동안 평균 약 2,760 ton/yr로 산정되었고, GPG 2000 Tier 2의 배출량은 평균 약 1,500 ton/yr, 2006 IPCC G/L Tier 2의 배출량은 평균 약 880ton/yr로 가장 낮게 산정되었다. The purpose of this study was to estimate greenhouse gas emissions using IPCC 1996 Guideline Tier 1, Good Practice Guidance 2000 Tier 2 and IPCC 2006 Guideline First Order Decay methods from landfill disposal facility. In addition, a comparative analysis evaluating the pros and cons of each method based on assumptions and default factors was considered for each method. The greenhouse gas emission computed using IPCC 1996 Guideline Tier 1 method (2,760 ton/yr) was higher than the estimation of GPG 2000 Tier 2 and IPCC 2006 Guideline First Order Decay Model which showed 1500 and 880 ton/yr respectively between 2000 and 2013.

진동계측자료 기반 안전성평가 시스템을 활용한 건축물의 비틀림 분석 방법 개발

정성훈,장원석,이정한,박병철,Jeong, Seong-Hoon,Jang, Won-Seok,Lee, Jung-Han,Park, Byung-Cheol 한국지진공학회 2021 한국지진공학회논문집 Vol.25 No.6

In this study, algorithms for analyzing the torsion of buildings under earthquake excitation are developed. The algorithm and formulations to account for the torsional angle are verified by analyzing the seismic acceleration time history data. The method was applied to the reference buildings to examine their operation and usability. The reference application demonstrated that the noise-canceling scheme successfully overcame various obstacles in the field measurements. The developed method is expected to be used as a tool to support a loss assessment system for determining the direction and priority of disaster response in the event of an earthquake.

동측 반맹을 호소하는 후두엽-두정엽 뇌출혈 환자에 대한 복합 한의치험 1례

정성훈,배인후,김근영,조기호,문상관,권승원,이한결,정우상,Seong Hoon, Jeong,In Hu, Bae,Geun Young, Kim,Ki-Ho, Cho,Sang-Kwan, Moon,Seungwon, Kwon,Han-Kyul, Lee,Woo-Sang, Jung 대한중풍순환신경학회 2022 대한중풍.순환신경학회지 Vol.23 No.1

■Background Overall prevalence of visual field loss after stroke was estimated at 31%, ranged from 5.5- 57%. Among them, homonymous hemianopia is the most common symptom of post-stroke visual field loss and leads to a decrease in the quality of life and therapeutic effect. However, standard treatment has not been established. ■Case report A 48-year-old male with right side homonymous hemianopia by a left occipital-parietal lobe hemorrhage was treated with Qu-Ji-Du-Huang-Wan, acupuncture and electroacupuncture for 20 days. We used confrontation visual field exam, automated perimetry and visual analog scale for evaluating symptoms. Following treatment, confrontation visual field exam and the subjective discomfort was improved. ■Conclusions The present case report suggests that combined Korean medicine treatment might be an effective treatment of post-stroke homonymous hemianopia. A number of follow up studies should be conducted to clarify the effectiveness of treatment.

잣나무 인공림의 흉고직경 등급별 생장변화에 관한 연구

정성훈,서영완,이대성,최정기,Jung, Sunghoon,Seo, Yeongwan,Lee, Daesung,Choi, Jungkee 한국산림과학회 2022 한국산림과학회지 Vol.111 No.1

본 연구는 장기 모니터링 자료를 이용하여 우리나라 잣나무 인공림의 흉고직경, 수고, 흉고단면적, 재적, 바이오매스 생장변화를 파악하기 위해 수행되었다. 또한, 인자별 입목의 상대적 크기에 따른 생장을 비교하여 향후 인공림의 경급별 생산·수확을 위한 기초자료를 제공하고자 하였다. 이를 위해 흉고직경 기준 20%씩 총 5개의 등급인 I등급(1~20%, 상위 20%), II등급(21~40%), III등급(41~60%), IV등급(61~80%), V등급(81~100%, 하위 20%) 및 전체등급(0~100%)으로 구분하여 등급별 생장특성을 비교분석하였다. 본 연구에서는 39년간 9회 조사된 자료를 이용하여 총생장과 연평균생장량이 산출되었으며, 입목평균을 이용한 개체목 특성과 단위면적 ha당 산출값을 이용한 임분 특성이 분석되었다. 인자별 총생장 분석 결과, 흉고직경, 흉고단면적, 재적, 바이오매스는 시간이 경과할수록 등급 간 총생장의 차이가 증가하였으나, 수고생장의 차이는 지속적으로 증가하지 않았다. 연평균생장량 분석결과, 평균흉고직경의 I등급 최대값은 23년생 때 0.92 cm·yr^-1로 관측되었으며, 전체등급의 최대값은 17년생 때 0.69 cm·yr^-1로 파악되었다. 평균수고의 I등급 연평균생장량은 23년생 때 0.52 m·yr^-1로 최대였으며, 전체등급의 최대값은 20년생 때 0.49 m·yr^-1로 파악되었다. 개체목 및 임분 단위의 흉고단면적, 재적, 바이오매스의 경우, 본 조사기간인 46년생까지 I등급과 전체등급의 연평균생장량 최대값은 관측되지 않았다. 따라서 해당 인자들의 연평균생장량 최대값을 파악하기 위해서는 보다 장기간의 모니터링이 요구된다. In this study, growth changes of the diameter at breast height (DBH), height, basal area, volume, and biomass of Korean white pine (Pinus koraiensis Siebold & Zucc.) on a plantation were examined via long-term monitoring. In addition, this study was performed to provide the basic data for timber production in line with DBH class by comparing the growth of the relative DBH size. Growth characteristics according to DBH class were analyzed by categorizing trees into five classes based on sorted DBH rankings: class I (1%-20%; upper 20%), class II (21%-40%), class III (41%-60%), class IV (61%-80%), class V (81%-100%; lower 20%). A total class (0%-100%) was also used. Total increment and mean annual increment (MAI) were calculated using data from nine measurements taken over 39 years. Tree characteristics based on average values and stand characteristics based on unit area per hectare were examined. According to the total increments of variables, the differences in DBH, basal area, volume, and biomass among classes I-V increased over time, whereas the height difference did not continually increase. According to MAI, the maximum DBH value was 0.92 cm·yr^-1 at age 23 in class I, whereas the maximum value in all trees was 0.69 cm·yr^-1 at age 17. The maximum value of height MAI for class I was 0.52 m·yr^-1 at age 23, whereas that for all trees was 0.49 m·yr^-1 at age 20. In terms of basal area, volume, and biomass growth at tree-and stand-level, the maximum MAI of class I and all trees was not observed during the measurement period. Therefore, additional long-term monitoring data are required to determine the maximum MAI of the variables.

Pseudo MOSFET 기술에 의한 양성자 조사 SOl 웨이퍼의 캐리어 수명 분석

정성훈,이용현,이재성,권영규,배영호,Jung, Sung-Hoon,Lee, Yong-Hyun,Lee, Jae-Sung,Kwon, Young-Kyu,Bae, Young-Ho 한국전기전자재료학회 2009 전기전자재료학회논문지 Vol.22 No.9

Protons are irradiated into SOl wafers under total dose of 100 krad, 500 krad, 1 Mrad and 2 Mrad to analyze the irradiation effect. The electrical properties are analyzed by pseudo MOSFET technology after proton irradiation. The wafers are annealed to stabilize generated defects in a nitrogen atmosphere at $300^{\circ}C$ for 1 hour because proton irradiation induces a lot of unstable defects in the surface silicon film. Both negative and positive turn-on voltages are shifted to negative direction after the irradiation. The more proton total dose, the more turn on voltage shifts. It means that positive oxide trap charge is generated in the buried oxide(BOX). The minority carrier lifetime which is analyzed by the drain current transient characteristics decreases with the increase of proton total dose. The proton irradiation makes crystal defects in the silicon film, and consequently, the crystal defects reduce the carrier lifetime and mobility. As these results, it can be concluded that pseudo MOSFET is a useful technology for the analysis of irradiated SOI wafer.

유전자알고리즘의 성능향상을 위한 선택적 돌연변이

정성훈,Jung, Sung-Hoon 한국정보처리학회 2010 정보처리학회논문지B Vol.17 No.2

유전자알고리즘의 조숙수렴현상(premature convergence phenomenon)은 유전자알고리즘의 성능을 크게 저하시키기 때문에 이 문제를 해결하는 것이 성능향상에 크게 영향을 준다. 본 논문에서는 유전자알고리즘의 조숙수렴현상을 완화하여 성능을 향상시키기 위한 선택적 돌연변이 방법을 제안한다. 선택적 돌연변이에서는 유전자알고리즘 개체의 등급에 따라서 염색체의 특정영역에 비트를 추가적으로 돌연변이 시킨다. 이렇게 함으로서 등급이 낮은 개체는 표현형 상에서 많은 변화가 일어나고 등급이 높은 개체는 작은 변화가 일어나게 된다. 결국 좋은 개체는 그 주변을 세부적으로 탐색하며 좋지 못한 개체는 새로운 영역을 탐색할 기회가 높아지게 되어 조숙수렴현상을 완화하면서 성능향상을 꾀할 수 있게 된다. 성능향상을 측정하기 위하여 4개의 대표적 함수 최적화 문제에 적용해서 제안한 방법의 성능을 측정하였다. 실험결과 기존의 유전자알고리즘보다 성능이 크게 향상됨을 확인하였다. Since the premature convergence phenomenon of genetic algorithms (GAs) degrades the performances of GAs significantly, solving this problem provides a lot of effects to the performances of GAs. In this paper, we propose a selective mutation method in order to improve the performances of GAs by alleviating this phenomenon. In the selective mutation, individuals are additionally mutated at the specific region according to their ranks. From this selective mutation, individuals with low ranks are changed a lot and those with high ranks are changed small in the phenotype. Finally, some good individuals search around them in detail and the other individuals have more chances to search new areas. This results in enhancing the performances of GAs through alleviating of the premature convergence phenomenon. We measured the performances of our method with four typical function optimization problems. It was found from experiments that our proposed method considerably improved the performances of GAs.

한국형 EMS용 송전손실계수(TLF) 산정프로그램 개발

정성훈(Sung-Hun Jung),최영진(Young-Jin Choi),이승호(Seung-Ho Lee),민경일(Kyung-Il Min),문영현(Young-Hyun Moon),김홍래(Hong-Rae Kim),이욱화(Wook-Hwa Lee),윤상윤(Sang-Yun Yun),김선구(Seon-Gu Kim),허성일(Seong-Il Hur) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.7(초록집)

“부사-용언” 관계를 이용한 타당한 연어 검정 방법 검토

정성훈(Sung Hoon Jung) 한국어학회 2015 한국어학 Vol.66 No.-

In this paper I review theoretical and statistical views of Korean collocation and suggest a best statistical method for detecting collocations between adverbs and predicates. In the meantime, a variety of statistical methods such as mutual information, t-test, chi-squared test are used in the fields of corpus linguistics, but in this paper I adopted G-test which is a kind of likelihood-ratio or maximum likelihood statistical significance test that is increasingly being used in situations where the application of chi-squared test was limited. This analysis using G-test showed that the ratio is much more suitable for collocations of adverbs and predicates in Korean compared to other statistical methods. Through this analysis we could find out ways to avoid the vagueness of Korean collocations from theoretical views and come up with statistically well-founded collocation constructions between adverbs and predicates.

대만 내 한국어 학습자의 재귀사 ‘자기(自己)’에 대한 학습 양상 고찰 - 한국어를 전공하는 대학생을 중심으로 -

정성훈 ( Jung Sunghoon ) 연세대학교 언어연구교육원 한국어학당 2021 외국어로서의 한국어교육 Vol.60 No.-

The aim of this study is to distinguish the types of errors in the Korean reflexive ‘caki’ on Korean learners in Taiwan and to reveal the patterns of acquiring them. To this end, 68 students of the Department of Korean Language and Literature at National Chengchi University in Taiwan participated in a grammar judgment experiment about the type of Korean reflexive ‘caki’. The result is that as Korean proficiency improved, the understanding of the Korean reflexive ‘caki’ also tended to improve. However, overall, it was found that it was difficult to acquire ‘caki’. In addition, learners in Taiwan had the greatest difficulty in acquiring the 1st binding of ‘caki’, and for the type of 1st blocking effect, they showed improvement only at the advanced level. Also, at first, they had difficulty in acquiring 3rd local binding and long-distance binding, although they showed the greatest improvement in the Korean language learning process. (Mokpo National University)

SIFT 알고리즘 기반 터치인식

정성훈(Sung Hoon Jung) 한국컴퓨터정보학회 2013 韓國컴퓨터情報學會論文誌 Vol.18 No.11

본 논문에서는 터치스크린 시스템에 강한 잡음이 존재하는 상황에서 안정적으로 터치를 인식하기 위하여 SIFT(Scale Invariant Feature Transform) 알고리즘을 기반으로 고안한 터치인식 방법을 소개한다. SIFT알고리즘을 기반으로 하여 잡음에 강하며 다양한 크기의 터치를 효과적으로 추출하는 것이 가능하다. 제안한 방법을 검증하기 위하여 터치스크린 상에서 얻은 채널데이터를 이용하여 매트랩 상에서 터치인식을 시뮬레이션 해 보았다. 시뮬레이션 결과 강한 잡음이 존재하는 상황에서 터치 크기와 방향에 상관없이 안정적으로 터치를 인식하는 것을 볼 수 있었다. 그러나 터치인식 알고리즘을 실제 터치스크린 상에 구현한 결과 SIFT 알고리즘에서 사용하는 DoG(Difference of Gaussian) 연산에 많은 계산 량이 필요하여 실시간 터치인식에 문제가 발생하였다. 우리는 이를 극복하기 위하여 DoG의 빠른 근사 방법인 DoM(Difference of Mean)을 사용하여 문제를 해결하였다. This paper introduces a touch recognition method for touch screen systems based on the SIFT(Scale Invariant Feature Transform) algorithm for stable touch recognition under strong noises. This method provides strong robustness against the noises and makes it possible to effectively extract the various size of touches due to the SIFT algorithm. In order to verify our algorithm we simulate it on the Matlab with the channel data obtained from a real touch screen. It was found from the simulations that our method could stably recognize the touches without regard to the size and direction of the touches. But, our algorithm implemented on a real touch screen system does not support the realtime feature because the DoG(Difference of Gaussian) of the SIFT algorithm needs too many computations. We solved the problem using the DoM(Difference of Mean) which is a fast approximation method of DoG.