http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
마그네시아 製造에 關한 硏究 간수, 海水로 부터 水酸化마그네슘 製造
맹중재,장인순,Maeng, Jung-Jae,Chang, In-Soon 대한화학회 1965 대한화학회지 Vol.9 No.1
One of the difficult and time consuming problems in the production of magnesia from sea water is a settling rate of magnesium hydroxide. In this experiments, authors attempted to accelerate its settling rate by addition of various sedimenting agents as C.M.C., Separan and Starch, and sought for optimum calcination temperature for domestic dolomite, as alkali source, mole ratio of dolomite milk to bittern. It is observed through experiments that the small amounts of sedimenting agents, C.M.C., Separan, starch, 20 mg/l, 40 mg/l, 400mg/l, respectively increase the settling rate of magnesium hydroxide by 8 times or more. The following conditions resulted in good yield of magnesium hydroxide from sea water with relatively tolerable calcium oxide contaminated for the magnesium clinker. Calcinating temperature, $1,100{\sim}1,200^{\circ}C$, mole ratio of 10% dolomite milk to magnesium salts in sea water or bittern, 1. 2 : 1.
물, Dioxane-물 및 Ethanol-물의 混合溶媒에서의 Hydrogen Cupferrate의 酸解離常數의 決定
김시중,윤창주,장인순,Kim, Si-Joong,Yoon, Chang-Ju,Chang, In-Soon 대한화학회 1966 대한화학회지 Vol.10 No.3
The glass electrode was empirically calibrated in dioxane-and ethanol-water mixed solvents, by means of which the pH-meter reading could be converted to stoichiometric hydrogen ion concentration. By the potentiometric titration method, the thermodynamic dissociation constants of hydrogen cupferrate (HCup) with variations of ionic concentration in aqueous solution were determined, and by the extrapolation of the constants the new thermodynamic $pK_a$ value, 3.980${\pm}$0.006, at zero ional concentration was obtained. The thermodynamic dissociation constants of HCup in dioxane-and ethanol-water solution were also potentiometrically determined with the changes in composition of organic solvents at 0.01 and 0.05 of the ionic strength(${mu}$) and 25 $^{\circ}C$. The empirical formula of the constants with mole fraction(n) of the organic solvent are as follow: Dioxane-water solution. $pK_a$= 12.96n + 4.10 at ${\mu}$ = 0.01, n = 0.0228∼0.171 $pK_a$= 12.05n + 4.23 at ${\mu}$ = 0.05, n= 0.0228∼0.171 Ethanol-water solution, $pK_a$= 4.0ln + 4.26 at ${\mu}$= 0.01, n= 0.0395∼0.262 $pK_a$= 3.83n + 4.34 at ${\mu}$= 0.05, n= 0.0395∼0.262
Methanol-물 및 2-Propanol-물의 混合溶媒에서의 Hydrogen Cupferrate의 酸解離常數의 決定
김시중,윤창주,장인순,Si-Joong Kim,Chang-Ju Yoon,In-Soon Chang 대한화학회 1966 대한화학회지 Vol.10 No.3
The glass electrode was empirically calibrated in methanol-and 2-propanol-water mixed solvents, by means of which the pH-meter reading could be converted to stoichiometric hydrogen ion concentration. The thermodynamic dissociation constants of hydrogen cupferrate in methanol-and 2-propanol-water solution were potentiometrically determined with the changes in composition of organic solvents at 0.01 and 0.05 of the ionic strength and 25$^{\circ}C$. The empirical formula of the constants with mole fraction (n) of the organic solvent are as follow: methanol-water solution $pK_a$= 2.24n + 4.29 at ${\mu}$ = 0.01 n = 0.0476∼0.642 $pK_a$ = 2.35n + 4.38 at ${\mu}$ = 0.05 n= 0.0446~0.642 2-propanol-water solution $pK_a$= 5.50n + 4.48 at ${\mu}$ = 0.05 n = 0.0253~0.259 The relationships between $pK_a$ of acetic acid, propionic acid and HCup and dielectric constant of some mixed solvents were discussed. It would be considered that the factors effecting $pK_a$ value of weak acid in mixed-solvent are not only dielectric constants but acid-base character and solvation effect of the solvent, etc.
윤석승,최윤동,장인순,Yun Sock Sung,Choi Yun Dong,Chang In Soon 대한화학회 1990 대한화학회지 Vol.34 No.5
금속원자 반응기를 사용하여 몰리브덴 금속증기와 1,3-butadiene 유도체를 반응시켜서 (${\eta}^4$-CH$_2$CRCR'CH$_2$)$_3$Mo(R, R'= H 또는 CH$_3$)를 합성하였으며, 이 때 생성된 유기금속화합물에 대한 1,3-butadiene 유도체의 메틸치환기 효과에 대하여 논의하였다. 그리고 몰리브덴 금속증기와 다른 몇 가지 알카디엔화합물을 반응시켜서 유기금속화합물이 형성됨을 확인하였으며 이들은 공기 중의 실온에서 쉽게 분해 되었다. 또한 (${\eta}^4$-CH$_2$CCH$_3$CCH$_3$CH$_2$)$_3$Mo와 일산화탄소를 반응시켜서 (C$_6$H$_{10}$)$_2$(CO)$_3$Mo를 합성하였으며 이 화합물의 금속-리간드 결합에 관하여 논하였다. Various tris (${\eta}^4$-diene) molybdenums were easily synthesized by the reaction of various 1,3-dienes and molybdenum metal vapors by using metal atom reactor. The methyl substituent effect of the tris (${\eta}^4$-diene) molybdenum produced were discussed. And some alkadiene-molybdenum complexes which were easily decomposed in the air at room temperature were also formed.(C$_6$H$_{10}$)$_2$(CO)$_3$Mo were synthesized and its molybdenum-diene bond type were discussed.
강영호,권선길,양영석,황성태,장인순 ( Young Ho Kang,Seon Gil Kwon,Yeong Seok Yang,Sung Tai Hwang,In Soon Chang ) 한국공업화학회 1992 공업화학 Vol.3 No.2
저준위 방사성 액체폐기물의 새로운 감용방법으로써 cellulose acetate막을 사용한 투과증발법의 연구가 수행되었다. 실험결과에 의하면 일반적으로 유기물의 분리에 사용되는 투과증발법은 액체폐기물의 감용을 위한 제염효과가 우수하였고, 수분의 증발속도도 저준위 방사성 액체폐기물의 감용을 위해 널리 사용되는 자연증발에 비해 현저히 빨랐다. 또한 주입용액의 조건에 따른 실험결과를 토대로 투과증발특성을 평가하였으며, 투과증발량을 증가시키기 위해 cellulose acetate막의 최적제막조건을 설정하였다. As a promising method for the volume reduction of the low-level liquid waste, the pervaporation process was studied using a cellulose acetate membrane. Experimental results showed that the pervaporation method, usually applied to separation of organic materials, has a good decontamination effect for the volume reduction of liquid waste and the evaporation rate of water in this process was markedly faster than that of natural evaporation method, a wide-used process for the volume reduction of liquid waste. Depending on the feed solution conditions, the pervaporation characteristics were evaluated by the experimental results and the optimum conditions for preparation of the cellulose acetate membrane were established to increase the pervaporation flux through the membrane.