네트워크 통신장비의 진동 해석

이재환,김영중,김진섭,Lee, Jae-Hwan,Kim, Young-Joong,Kim, Jin-Sup 한국전산구조공학회 2007 한국전산구조공학회논문집 Vol.20 No.4

Some network equipments made in Korea were exposed to severe earthquake in Japan several years ago. More than a hundred slim base transfer network stations had been seized with the severe earthquake at Nigata and it was reported that less than fifteen sets showed blackout by interruption of electricity, not by the structural failure. The purpose of this paper is to check the structural safety of the network equipments by performing table test, and the static and dynamic finite element analysis. For the dynamic test, the station weighing 200 kg was subjected to the Zone 3 earthquake loading of GR-63-CORE on the shaking table to obtain the dynamic responses to compare with the analysis results. It is shown that the FE analysis results are a little bit larger than that of the experimental values. And the sensitivity analysis and optimization for the natural frequency is performed and it is found that the first natural frequency is sensitive to small design change as shown in the results. And the dynamic response of optimized design is less than the original design. 최근 일본에서 발생한 지진으로 이동통신용 전자장비들이 많이 파손되었으나. 국내에서 제작되어 일본에 설치된 모제품은 강진에서도 대부분 구조적 손상이 없었다. 본 논문에서는 이동통신 네트워크 장비의 정/동적 특성을 평가하기 위하여 제품의 유한요소 모델을 생성하여 정적 및 동적 구조해석을 수행하였다. 또한 Zone 3 GR-63-CORE 동적 실험을 수행하여 제품의 안정성을 검증하였고, 유한요소 구조해석 결과와 비교하여 실험과 해석 결과가 유사함이 입증되었다. 구조해석 결과인 동적 응답특성은 실험보다 다소 크게 나왔으며, 부재의 특성파악을 위해 구조물의 치수를 설계변수로 하여 진동특성에 대한 민감도 해석으로 고유진동수에 민감한 부재를 판별하였고, 치수변경으로 경량화 설계치를 산출하였다. 경량화된 디자인의 동적 응답변위가 원래 디자인보다 작게 나와 최적화 결과가 유용할 것으로 보인다.

작업환경측정 자료를 활용한 Dichloromethane 노출 매트릭스 구축에 대한 연구

이재환,박동욱,홍성철,하권철,Lee, Jae-Hwan,Park, Dong-Uk,Hong, Sung-Chul,Ha, Kwon-Chul 한국환경보건학회 2010 한국환경보건학회지 Vol.36 No.5

A reduction in risk of occupational exposure to chemical hazards within the workplace has been the focus of attention both through industry initiatives and legislation. The aims of this study were to develop an exposure matrix by industry and process, and to apply this matrix to control the risk of occupational exposure to Dichloromethane (DCM). The exposure matrix is a tool to convert information on industry and process into information on occupational risk. The exposure matrix comprised industries and processes involving DCM, based on an exposure database provided by KOSHA (the Korean Occupational Safety and Health Agency), which was gathered from a workplace hazards evaluation program in Korea. The risk assessment of the exposure matrix was performed using Hallmark risk assessment tool. The results of the risk assessment were indicated by a Danger Value (DV) calculated from the combination of hazard rating (HR), duration of use rating (DUR), and risk probability rating (RPR) of exposure to the chemical, and were divided into four control bands which were related to control measures. The applicability of the risk assessment of the exposure matrix was evaluated by a field study, and survey of the employees of the exposure matrix groups. Among 45 industries examined, this study found that greater attention should be paid to two industries: the manufacture of other optical instruments and photographic equipment, and the manufacture of printing ink, and to one process among 47 examined, the packing process in the manufacture of printing ink, because these were regarded as carrying the highest risk. This tool of a risk assessment for the exposure matrix can be applied as a general exposure information system for hazard control, risk quantification, setting the occupational exposure limit, and hazard surveillance. The exposure matrix includes workforce data, and it provides information on the numbers of exposed workers in Korea by agent, occupation, and level of exposure and risk.

가열 조리된 돼지고기의 Heterocyclic Amines 분석을 위한 Solid-phase 추출 방법의 비교

이재환,백유미,이광근,신한승,Lee, Jae-Hwan,Back, Yu-Mi,Lee, Kwang-Geun,Shin, Han-Seung 한국축산식품학회 2008 한국축산식품학회지 Vol.28 No.5

식품 중 HCAs을 검출하기 위한 최적 전처리 방법을 확립하기 위해 가열 조리된 돼지고기 패티를 이용하여 서로 다른 4가지 SPE(solid-phase extraction)방법을 비교하였다. 4가지 전처리 방법을 통해 얻은 15가지 HCAs 회수율은 3.0%(방법 A, Tri-P-1)-74.7%(방법A, Tri-P-2)이었다. 그 중 $MeA{\alpha}C$가 평균적으로 73.4%로 가장 높은 회수율을 보였으며 Tri-MeIQx가 15.2%의 가장 낮은 회수율을 보였다. 4가지 전처리 방법 중 방법A와 방법D가 가장 높은 회수율과 검출빈도를 보였으며 방법B와 방법C는 Harman(14.8%)을 제외하고는 전혀 검출되지 않았고 회수율을 구할 수 없었다 발암 가능 물질인 IQ, $A{\alpha}C$, $MeA{\alpha}C$, Glu-P-1, Glu-P-2, MeIQ, MeIQx, PhIP 등을 검출하는 방법에는 방법A(48.7-74.6%)가 4가지 방법 중 가장 유리하다. HCAs는 극성에 따라 polar amines과 less-polar amines으로 구분할 수 있는데 방법A는 less-polar amines검출에 유리하고 방법D는 polar amines검출에 유리하다. 방법A와 방법D의 chromatogram을 비교한 결과 방법A와 방법D 모두 15가지 HCAs가 깨끗하게 분리되었지만 Tri-MeIQx 등을 검출하는데 방법A가 더욱 유리하다. SPE 전처리 방법 및 LC/MS 분석방법에 대한 유효성을 확인하기 위해 LOD(0.2-2.1 ng/mL)와 LOQ(0.8-9.7 ng/mL), 표준 편차(0.2-8.6)를 구하였다.

반응표면법에 의한 승강장 안전문(PSD) 부재의 최적화

이재환,김진호,Lee, Jae-Hwan,Kim, Jin-Ho 한국전산구조공학회 2009 한국전산구조공학회논문집 Vol.22 No.1

본 논문에서는 승객 보호용으로 지하철 역사에 설치된 PSD(승강장 스크린 도어)의 상부 헤더박스 내에 부착되어 개폐용 유리문을 지지하는 알루미늄 구동(레일)부재에 대한 구조해석과 최적설계를 수행하였다. 구동부재의 볼트 체결부에 대한 엄밀한 구조해석을 위하여 물리적 현상과 일치하도록 상세 유한요소 모델링하여 해석의 정확도를 높였다. 또한 유리문이 구동부재에 걸려 있으면서 개폐될 때 발생하는 하중의 이동상태를 고려한 구조해석 결과, 설계 목표치인 내구 수명 20년이 만족되었다. 구동부재 단면의 단면 길이를 설계변수로 하고 설계제약조건(응력의 최소화, 중량의 감소)에 만족할 수 있도록 반응표면법을 적용한 최적화를 수행하여 15%의 감량 결과를 도출하였다. In this paper, the structural analysis and optimization of the door supporting rail structure in the header box located at the top of the aluminum passenger safety door(PSD) at the subway station, which opens and closes regularly, is performed. In case the simple fixed boundary condition is used for the bolt fixture on the supporting rail where the glass door is moving, excessive stresses are obtained. Therefore, more realistic finite element modeling of the bolts is used at the bolt fixture in the whole structure in order to obtain the more physically acceptable FEM results. As a result, fatigue life of twenty years of the structure is obtained to satisfy the design object. Also the optimal design of cross section of the rail part is performed using the response surface method and 15% of weight of the supporting rail part on the door is reduced.

광증폭기 기술 개요 및 시장 전망

이재환,조성선,Lee, Jae-Hwan,Jo, Seong-Seon 한국광산업진흥회 2002 광산업정보 Vol.10 No.-

데이터 통신의 급격한 증가를 배경으로 대용량 통신이 가능한 광통신망 구축이 늘어나고 있다. 광통신망 구축을 위해서는 각종 시스템과 연동이 가능한 광통신 부품의 개발이 중요하고, 그 만큼 광통신 부품의 수요도 증가할 전망이다. 본 고에서는 주요 광통신 부품의 하나로 앞으로 큰 폭의 성장이 예상되고 있는 광증폭기에 대한 기술 개요와 시장 전망에 대해 살펴본다.

우기와 건기 중 섬진강 하구역에서 염분경사에 따른 유색용존유기물의 변동성

이재환,박미옥,Lee, Jae Hwan,Park, Mi Ok 해양환경안전학회 2016 해양환경안전학회지 Vol.22 No.4

섬진강 하구역에서 염분경사에 따른 유색용존유기물(CDOM)의 농도와 특성을 시공간적으로 이해하기 위해 2012년 건기(3월과 6월)와 우기(7월)에 분포특성을 조사하고, 환경요인(수온, 염분)과 영양염, 엽록소와의 상관관계를 고찰하였다. 유색용존유기물의 평균농도는 각각 $1.0{\pm}0.3m^{-1}$(3월), $1.3{\pm}0.4m^{-1}$(6월), $1.4{\pm}0.3m^{-1}$(7월)로 측정되었다. 섬진강 상류의 높은 유색용존유기물 농도(> $1.5m^{-1}$)는 하류로 갈수록 감소(< $0.5m^{-1}$)하였고, 우기에 건기의 평균값에 비해 증가하였다. 또한 유색용존유기물의 화학적 특성과 공급원에 대한 지시자로 사용되는 평균값 $S_{300-500}$은 $0.013{\sim}0.018nm^{-1}$로, 건기에 비해 우기에 높은 값을 나타내었다. 유색용존유기물과 염분은 역상관계를 보였고($R^2$ > 0.8), 우기와 건기 모두 보존성 혼합의 양상을 보였다. 유색용존유기물은 강 하류로 갈수록 해수와 혼합되는 과정에 의해 희석되고, 그 특성 또한 뚜렷한 변화를 보이는 것을 확인하였다. 환경 조건 중 유색용존유기물의 변동에 영향을 주는 주요한 요인은 염분 (혼합)과 온도로 확인되었으며, 전자는 낮은 유색용존유기물 농도의 해수와의 혼합에 의한 희석으로 주로 공간적인 변동을 조절하는 것으로 보였고, 온도의 증가는 유색용존유기물의 생산에 영향을 주는 미생물학적 활동과 광분해에 통한 작용으로 유추된다. The distribution patterns of Chromophoric Dissolved Organic Matter (CDOM) and the chemical characteristics of CDOM in the Seomjin river estuary were investigated in March, June and July 2012 in order to determine the spatial and temporal variability of CDOM along the salinity gradient considering the effects of mixing, nutrients and Chl a. The average CDOM values were $1.0{\pm}0.3m^{-1}$, $1.3{\pm}0.4m^{-1}$, and $1.4{\pm}0.3m^{-1}$ in March, June and July, respectively. A high concentration of CDOM (greater than $1.5m^{-1}$) was found at the head of the river which decreased towards the river mouth to as low as less than $0.5m^{-1}$. The average concentrations of CDOM increased from the dry season (March and June) to the wet season (July), and the average slope values ($S_{300-500}$), which were used as indicators of CDOM characteristics and sources, were in the range of $0.013-0.018m^{-1}$. The CDOM and $S_{300-50}$ values showed that not only the concentration of CDOM but also the chemical properties of DOM clearly changed between upstream and downstream in the Seomjin river. CDOM and FDOM showed a negative correlation with salinity ($R^2$ > 0.8), and CDOM was positively correlated with FDOM. Furthermore, the mixing pattern of CDOM was confirmed as conservative for all seasons. The main environmental factors influencing the concentration of CDOM was confirmed as conservative for all seasons. The main environmental factors influencing the concentration of CDOM were salinity (mixing) and water temperature, which meant the dilution of low CDOM seawater, was the controlling factor for the spatial distribution of CDOM. Increases in water temperature seemed to induce the production of CDOM during summer (June and July) through the biological degradation of DOM either by microbial activity or photo-degradation.

The Seismic Safety Assessment of 170 kV GIS (Gas-Insulated Switchgear) by the Seismic Test on the Large Shaking Table and by the Finite Element Analysis with Korean and IEC Seismic Standards

이재환,Young-Joong Kim,박제인,이기천,Jung-Hee Lee,Myong-Seok Bang 대한전기학회 2020 Journal of Electrical Engineering & Technology Vol.15 No.6

This paper describes the seismic test and numerical stress analysis of a 170 kV Gas-insulated switchgear (GIS) to see the structural and operational safety. Both the seismic test and numerical FEA (fi nite element analysis) are performed according to the procedure of Korean and International (IEC-62271) seismic standards. The GIS is mounted on the shaking table for a seismic test at KIMM (Korea Institute of Machinery and Material) to see the stress level and safety under earthquake loading conditions. The FEA analysis is performed to compare with the seismic test. Both the natural frequency (NF) and stress results from the numerical computation and seismic test are close and show adequate electrical and structural safety margin.

상악동골이식 후 임플란트 생존율 및 골이식재의 흡수율에 관한 임상적 연구

이재환,지영덕,민승기,오승환,권대근,전인철,Lee, Jae-Hwan,Chee, Young-Deok,Min, Seung-Ki,Oh, Seung-Hwan,Kwon, Dae-Geun,Jeon, In-Chul 대한악안면성형재건외과학회 2010 Maxillofacial Plastic Reconstructive Surgery Vol.32 No.6

Purpose: The Purpose of this study is to show the total survival rate of implants with maxillary sinus grafting and the effects that reach the survival rate by classifying types of graft materials, implant type, operation method, residual bone height and evaluate graft material resorption rate after sinus grafting Patients and Methods: 61 dental implants placed with sinus bone grafting in 24 patients at Wonkwang University Sanbon Dental Hospital were installed simultaneously or after regular healing. Various bone grafts (autograft, xenograft, allograft, alloplast) and fourth implant type (GSII, Xive, Implantium, Novel biocare) were used. All implants were investigated clinically and radiographically, being with average 20 months follow-up period after installation. Results: 3 fixtures were lost, resulting in 95.1% cumulative survival rate of 61 osseointegrated dental implant. Survival rate according to bone material type, Implant type, operation method, residual bone height, have no statistically significant differencies. The mean preoperative residual alveolar bone height was 4.75 mm, average postoperative height of graft materials 10.8 mm, vertical bone resorption rate was 10% after 2 years. Resorption rate according to operation method was 7% (simultaneous) and 5% (delayed) after 1 year. Conclusion: It can be suggested that maxillary sinus grafting may have predictable result with various bone graft materials and implant type, residual bone height, operation method

전환성장인자-베타 억제제(TGF-βinhibitor)의 각막열상 후 각막혼탁 억제 효과

이재환,김이태,오중협,Jae Hwan Lee,Ei Tae Kim,Jung Hyub Oh 대한안과학회 2009 대한안과학회지 Vol.50 No.3

Purpose: To evaluate the effects of TGF-β inhibitor on the wound healing process after corneal laceration, and its inhibitory effect on corneal scar formation. Methods: Forty Lewis rats were randomly divided into one control and three experimental groups (groups I, II, and III). After partial-thickness vertical linear corneal incision, a diluted solution with 10, 25, and 50 μg of TGF-β inhibitor was instilled into each eye of groups I, II, and III respectively. Corneal haze was measured by using slit-lamp biomicroscopic examination. Using histopathologic examination, we compared the number of stromal keratocytes and the arrangement of regenerated collagen fibers. We also performed immunohistochemistry to confirm the differential expression of fibronectin and α-smooth muscle actin in each group. Results: Group III showed less corneal haze and more regular arrangement of regenerated collagen fibers than the other groups. The number of stromal keratocytes and immunoreactivity to fibronectin and α-smooth muscle actin decreased as the dose of TGF-β inhibitor increased. Conclusions: TGF-β inhibitor effectively reduced corneal haze during corneal healing processes after corneal laceration.

기획특집 3-인류와 축산의 오랜 친구,효모

이재환,Lee, Jae-Hwan 한국단미사료협회 2006 피드저널 Vol.4 No.4