http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
비선형 초음파를 이용한 시멘트 페이스트의 탄산화 정량 평가
이바다 ( Lee¸ Bada ),백승오 ( Baek¸ Seungo ),이정훈 ( Rhee¸ Jeong-hoon ),김형기 ( Kim¸ Hyeong-ki ),김건 ( Kim¸ Gun ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.2
본 연구에서는 비선형 초음파 기법을 이용하여 시멘트 페이스트에 대한 탄산화의 영향을 정량화한다. 종파 속도 및 이차 고조파 생성 (Second harmonic generation, SHG)의 물리 현상을 기반으로 측정하는 비선형 계수 (Acoustic nonlinearity parameter, β) 통해 가속 탄산화 과정에서 발생하는 재료의 거시적/미시적 물성 변화를 정량화하였다. 이를 통해 탄산화에 의한 페이스트 내구성 향상을 모니터링하였고, 양생 조건에 따른 탄산화 특성을 분석하였다.
Implant-assisted removable partial denture for severely atrophied mandible
최바다,김연주,이재훈,Choi, Bada,Kim, Yeun Ju,Lee, Jae Hoon The Korean Academy of Prosthodonitics 2019 대한치과보철학회지 Vol.57 No.2
치조제가 심하게 흡수된 하악의 정확한 해부학적 구조를 채득하는 것은 매우 어렵다. 이 경우 보다 정확한 인상을 채득하기 위하여 수정모형 제작법을 통한 기능 인상 채득이 추천된다. 이를 위해서는 양측에 2개의 임플란트 크라운을 이용하여 적절한 고정원을 얻을 필요가 있다. 이를 통해 임플란트 피개의치에서는 불가능하였던 수정모형 제작법을 시행할 수 있다. 본 증례에서는 하악의 치조제가 심하게 흡수된 80세 여환을 하악 양측 견치 부위의 임플란트 크라운을 지대치로 한 가철성 국소의치를 이용하여 수복하였다. 가철성 국소의치의 금속구조물을 이용하여 개인 트레이를 제작하고 수정모형 제작을 위한 이차 인상을 채득하였다. 환자는 앞선 2회의 피개의치 실패 후 제작된 최종 보철물에 만족하였다. 치료 초기에 행해진 피개의치 치료에서는 부정확한 인상법에 따른 부적절한 보철물로 인해 술자와 환자 모두 만족하지 못했지만, 2개의 임플란트를 적절한 고정원으로 이용함으로써 성공적인 수복이 가능하였다. Mandible with severe alveolar bone atrophy poses a significant challenge in terms of reproducing clinically acceptable anatomy for a removable prosthesis. To overcome this potential complication, altered cast impression technique is often recommended to capture accurate and functional gingiva tissues. It becomes possible to get proper anchors functional impression by placing 2 implants crowns which were impossible in previous implant overdenture impression technique. In this case, an 80-year old female patient with severe mandibular ridge atrophy was treated with an implant-assisted removable partial denture with two implant crowns on the canine area. An altered cast impression was taken with an individual tray on a metal framework of removable partial denture on both posterior edentulous areas. The patient was satisfied with the final prosthesis after failure of 2 previous prostheses. Clinician had a difficult time to manage disabled patient and patient were suffered with ill-fitting denture due to inaccurate impression in conventional overdenture condition. The oral rehabilitation was completed with placing 2 implants as proper anchor.
이바다,권진일,임재석,백지웅,박진후,김형준,Lee, Bada,Kwon, Jin-Il,Lim, Jae-Seok,Baek, Jiwoong,Park, Jin Hoo,Kim, Hyung Jun 대한악안면성형재건외과학회 2012 Maxillofacial Plastic Reconstructive Surgery Vol.34 No.6
Traumatic lacerations are common in the orofacial region as a result of accidents. Due to the frequent movement of the skin around the mandible, scars in that area are more likely to widen or become hypertrophic. Treatment of facial laceration was performed on three patients and followed by regular check-up. It was discovered that the scars have become hypertrophic, so steroid injections were used. The results were satisfactory with the decrease in sizes and hardnes of the scar. Facial scarring is a particularly distressing phenomenon and has always been a challenge to treat as the scars are more likely to widen or become hyphertrophied due to the frequent movement of the muscle in the facial area. We confirmed that the positive effect of steroid on hypertrophic scars. So, we suggest that proper treatment and periodic follow-up, adjuvant treatments especially steroid injection is necessary in patients with lacerations.
최예찬(Yechan Choi),이바다(Bada Lee),이채현(Chaehyun Lee),송창근(Changgeun Song),이정(Jung Lee),김선정(Sunjeong Kim) 한국HCI학회 2023 한국HCI학회 학술대회 Vol.2023 No.2
본 논문은 Unity의 DOTS 기술에 대해 분석해보고 Unity의 기존 시스템과 DOTS 시스템을 사용하는 시뮬레이션을 각각 제작하여 성능 향상 수치에 대해 비교 및 분석한다. 기존 시스템인 MonoBehaviour 를 사용하는 프로젝트와 비교해 보았을 때 성능의 지표가 되는 FPS(Frame Per Second)뿐만 아니라 CPU, GPU 점유율 등 엔진 연산 속도의 수치가 눈에 띄게 향상되었다. 제작한 시뮬레이션과 DOTS로 제작된 오픈소스 프로젝트를 분석해 보았을 때 DOTS 기술을 적절히 사용한다면 Unity 프로젝트의 성능을 기존에 비해 상당히 높은 수준까지 끌어올릴 수 있음을 확인하였다.
백승오 ( Baek Seungo ),이바다 ( Lee Bada ),이정훈 ( Rhee Jeong Hoon ),김건 ( Kim Gun ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
본 연구는 기존의 종파기반 건설재료 물성 평가방식의 단점을 보완하기 위한 방안으로 비접촉 정상파 기법을 제안하고 이를 이용하여재료 비선형성 지수(β)를 측정함으로써 재료의 물성을 정량화한다. 기존의 종파를 이용한 β 측정법은 시편의 크기가 작을수록 측정에 큰 제약을 받는다. 이러한 문제점을 해결하기 위해 본 연구에서는 시편 내부에 인위적으로 무수의 반사파를 형성하고 이들의 중첩에 의해 만들어지는 신호를 분석함으로써 시편의 기하학적 특성에 무관하게 β를 측정한다. 또한, 측정된 β의 원리를 수학적으로 규명하고, 이를 이용하여 재료 비선형성이 높은 시멘트 페이스트 시편의 열 손상에 따른 미세균열 성장을 정량화한다.