http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손일문(Il-moon Son),이중순(Joong-soon Lee),곽효연(Hyo-Yean Kwak) 한국자동차공학회 2007 한국자동차공학회 지부 학술대회 논문집 Vol.- No.-
In this paper, the trend of studies of automotive ergonomics in Korea is reviewed to contribute to R&D for the high quality and more competitive products of vehicles in the world. First of all, ergonomic and emotional engineering approach, and its subjects are suggested briefly for providing the concept to non-ergonomist. Activities and papers of, mainly, KSAE and ESK for past ten years are surveyed and reviewed only in terms of automotive ergonomics. In results, driving task performance, and ergonomic design factors of vehicle such as cab, safety device, seat, ITS, controls and displays, and so on have been studying partly. But, these subjects have been studying mainly by ergonomists since 2000. It means the study of automotive ergonomics in Korea is the beginning step up to now. Therefore, it is needed that automotive engineers make actively effort to introduce ergonomic approach to their researches, also it is recommended that automotive engineer and ergonomist will be a co-operator in this field.
곽효연(H. Y. Kwak),손병창(B. C. Son) 한국재활복지공학회 2017 재활복지공학회논문지 Vol.11 No.3
본 연구에서는 농기계 사고 대책 및 안전에 대한 연구 동향을 파악하고 그 내용을 분석하였다. 농업기계로 인한 안전을 다룬 연구는 사고 현황 조사와 사고조사 방법의 문제를 제기한 연구들로 분류할 수 있었으며, 농기계 안전사고의 원인분석에 관한 연구들은 국가차원과 포괄적인 농작업 재해 테두리 내에서 다루어지고 있었다. 안전사고의 예방과 관리에 대한 연구는 농기계 종류에 따른 사용자 요구 분석과 관리적, 교육적, 재정적 지원책에 대한 연구들이 수행되고 있었다. 또한 보다 적극적으로 농기계 사고에 대응하기 위해서 고령자의 기능과 능력에 대한 연구의 활성화가 필요함을 알 수 있었다. This study analyzed any accidents occurred by agricultural machines and comprehended the safety for trends in the current research. The researches pertaining to the safety for agricultural machines are identified by two different methods: scrutinizing the statistical data for accidents and suggesting solutions to ways of an investigation. Other researches related to investigations for the accidents by agricultural machines are planned on the national level and the broad terms of an accident of agricultural activities. The studies are conducted for the prevention and control of accidents about the requirement analysis as well as administrative, educational and financial policy in accordance with the different kinds of the agricultural machines. In addition, for the better responses to injuries caused by the agricultural machines, more researches about the function and ability of elders are much needed.
손일문(Son, Il-Moon),곽효연(Kwak, Hyo-Yean) 한국산학기술학회 2013 한국산학기술학회논문지 Vol.14 No.4
자동차의 유지보수 및 수리를 위한 장비에서 환경오염에 대한 관심이 증대되고 있음에도 불구하고, 국내 자 동차 공조시스템에 대한 대부분의 이러한 장비는 환경오염에 대해 무관심뿐만 아니라 그 기능도 뒤떨어진 것이 사실 이다. 이 논문에서는 자동차 공조시스템의 냉매의 회수 및 재충전을 위한 모니터링 기술과 진단 시스템을 개발하였 다. 이러한 개발된 기술과 시스템은 냉매상태의 정확한 진단과 모니터링을 통하여 자동차 공조시스템에 정확한 냉매 량을 충전가능하게 해준다. 또한 이러한 기술은 주변 온도에 따라서 냉매의 회수압력을 조절함으로서 냉매의 회수와 충전에 대한 정확한 제어를 가능하게 해준다. There has been an increasing interest in the market of vehicle maintenance and repair equipments to decrease air pollution. However, most of the existing air conditioning system equipment in Korea have poor performance as well as non-protection against air pollution. The purpose of this paper is to develop the monitoring technology of recovering and recharging refrigerant for air conditioning system, and also to develop its related diagnostic system. This technology and system can supply the exact amount of refrigerant from the charger to the air conditioning system by precisely diagnosing and monitoring their statuses. This technology can also control recovering and recharging of refrigerant exactly by altering the recovering pressures of refrigerant according to circumstance temperatures.
손일문,곽효연 대한인간공학회 2002 大韓人間工學會誌 Vol.21 No.4
In the programming of industrial robot, it is difficult to control the motion of mechanical arm by teach pendant in the coordinate system, because an operator may have the poor perceptions of the position and direction of mechanical arm in three-dimensional workspace. In this paper, we argued that cognitive characteristics must be considered in a study on the control-motion compatibility of teach pendant for improving the task performance. "The visual cues or references related to the positions and directions of axes in the coordinate system according to changing of operator-robot orientation" was suggested as one of the important factors by protocol analysis. In the experiments, this suggested factor, and visual cues(Gray,1991) were tested to evaluate the effects on task performance. In results, the visual cues was good to improve the task performance, too. But the improvement of task performance by the teach pendant considering the suggested factor was better than the visual cues. Furthermore, it was acquired as the best result that the reduction rate of task completion time, and the numbers of task errors were 48.2%, and 86.5%, respectively, by using the visual cues and the suggested factor, simultaneously. Male's work completion time was 78.0%, and the numbers of task errors were 61.4% compared to female's.
ICT 기반의 공정재배와 관행재배에 있어서 인삼 생장 및 진세 노사이드 함량에 미치는 영향
장광진,김연복,구현정,백현진,홍의기,이수빈,최지혜,손효연,김태영,김동현,Kwang Jin Chang,Yeon Bok Kim,Hyun Jung Koo,Hyun Jin Baek,Eui Gi Hong,Su Bin Lee,Jeei Hye Choi,Hyo Yeon Son,Tae Young Kim,Dong Hyun Kim 국립한국농수산대학교 교육개발센터 2023 현장농업연구지 = Journal of practical agricultural resear Vol.25 No.2
한국농수산대학교 공정육묘실에서 인삼을 종자 파종하여 생장한 인삼 1년근을 각 실험구(공정육묘실, 관행 노지)에 이식 전 1차 생장 조사를 하고, 3개월 생육 후 2차 생장 비교조사를 하였다. 1차 생장 조사 결과, 이식 전 뿌리의 무게는 평균 0.95g에서 이식 후 관행 노지는 0.21g, 공정육묘실은 0.29g으로 증가하였다. 뿌리의 길이는 평균 13.85cm에서 이식 후 관행 노지는 2.03cm, 공정육묘실은 2.66cm로 증가하였다. 뿌리의 지름은 평균 5.58mm에서 이식 후 관행 노지는 1.04mm, 공정육묘실은 1.26mm로 증가하였다. 공정육묘실에서 생육한 인삼이 관행 노지재배보다 더 많은 생장이 확인되었다. 공정육묘실에서 생육한 인삼과 진안 농가 관행 노지재배 인삼의 진세노사이드 성분함량 비교를 위해 각 1년근, 2년근의 진세노사이드 11종(Rg1, Re, Rf, Rh1(S)+Rg2(S), Rb1, Rc, Ra1, Rb2, Rb3, Rd, Rg3)의 함량 비교한 결과, 진세노사이드 1종 전체 함량이 공정육묘실 재배 인삼 1년근에서는 17.32mg/g, 공정육묘실 재배 인삼 2년근에서는 16.43mg/g, 관행 노지재배 1년근에서는 5.84mg/g, 관행 노지재배 2년근에서는 6.17mg/g으로 확인되었다. 관행 노지재배 인삼 1년근, 2년근보다 공정육묘실 1년근, 2년근이 2배 이상으로 더 많은 진세노사이드 함량이 HPLC 분석 결괏값으로 확인되었다. 결론적으로 관행 노지재배 묘삼은 자연환경 아래에서 재배환경의 다양한 요인에 의한 생장이 작용하는 반면 공정육묘는 생장이 우수한 인공토 비율과, 식물 영양액 농도 EC1.0ms/cm로 수분을 공급하여 안정된 생장을 할 수 있고, 식물 생장에 필요한 온도, 광, 수분의 환경제어가 가능한 상태에서 생장하므로 묘삼의 생장 안정성을 확보할 수 있어 향후 이에 관한 지속적인 연구가 필요하다. This study conducted an experiment with EC 1.0ms/cm ratio and excellent soil conditions for germination in ICT-based ginseng process cultivation. The first growth survey was conducted before transplantation of ginseng 1-year roots grown by seeding ginseng in the process cultivation, conventional cultivation and a second growth comparison survey was conducted after 3 months of growth. In the results, it was confirmed that ginseng grown in the process cultivation grew more than in the field. As a result of comparing the contents of 11 ginsenosides of 1-year and 2-year-old ginsenosides in the process cultivation and conventional cultivation ginseng, it was confirmed that the content of the process cultivation ginseng was higher than that of practice cultivation ginseng. In conclusion, conventional cultivation ginseng grows due to various factors under the natural cultivation environment, but process cultivation can secure the growth stability of ginseng by allowing stable soil and environmental control, so continuous research is needed in the future.