http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
RF-PECVD법에 의해 합성된 a-C : H 박막의 내부응력에 관한 연구
손민규,이상현,김성녕,이재성,고명완,Son, Min-Gyu,Lee, Sang-Hyeon,Kim, Seong-Nyeong,Lee, Jae-Seong,Go, Myeong-Wan 한국재료학회 1998 한국재료학회지 Vol.8 No.3
RF-PECVD로 합성된 a-C : H 박막의 내부압축응력 발생 원인을 규명하기 위하여 mesh에 RF power를 인가하는 새로운 장치를 고안, 기판지지대에 RF power를 인가하는 기존의 장치에서 합성된 시편과의 비교.분석을 수행하였다. Raman 분광 분석과 내부압축응력 측정 결과로부터 mesh 장치에 의해 합성되어진 시편의 $sp^{3}$$sp^{2}$비가 감소함에 따라 내부압축응력이 감소하는 것을 관찰할 수 있었으며, 또한 미세경도와 밀착강도를 측정하였다. 그리고 내부합축응력 발생에 대한 이온충돌효과를 확인하기 위해서 Ar보조가스를 첨가하였다. 그 결과 입자의 peening 효과에 의한 내부압축응력의 발생을 확인할 수 있었다.
Effect of Ultraviolet Radiation on the Long‑Term Stability of Dye‑Sensitized Solar Cells
손민규,Hyunwoong Seo 대한금속·재료학회 2020 ELECTRONIC MATERIALS LETTERS Vol.16 No.6
Ultraviolet (UV) radiation has been a significant issue in photovoltaics. It has much stronger energy than visible or infrared ray. In photovoltaics, large energy of UV is useful for the photogeneration, but it is also involved in long-term degradation. In this work, we focused on the effect of UV irradiation on the long-term stability of dye-sensitized solar cells (DSCs). TiO2, which is a good photocatalyst, has the absorption in UV region and TiO2 excited by UV is possible to deteriorate DSC performance. Five kinds of filters with various filtering ranges were applied for DSCs and their photovoltaic properties were measured in the long-term. UV irradiation initially contributed to the increase in the photogeneration. However, the UV irradiated DSC exhibited earlier start of degradation and more rapid deterioration than other filtered DSCs. Consequently, the unfiltered DSC exhibited 29.7% decrease in comparison with initial performance after 160 h UV irradiation while other filtered DSCs exhibited 13.5% decrease averagely.
인플레이션 불확실성의 기업 설비투자에 대한 비대칭적 효과 분석
손민규,장영재,Son, Minkyu,Chang, Youngjae 한국통계학회 2014 응용통계연구 Vol.27 No.1
인플레이션의 불확실성은 기업투자의 기회비용 산정 등에 어려움을 줌으로써 설비투자를 위축시킬 수 있다. 본 연구에서는 우리나라에서도 이러한 가설의 성립여부를 검정하고자 시변모수(Time-Varying) GARCH모형과 품목별 상대가격 변동성을 통해 인플레이션과 관련된 불확실성을 측정하고 동 불확실성이 기업의 설비투자에 미치는 영향을 살펴보았다. 인플레이션 불확실성을 인플레이션율의 불확실성과 품목별 상대가격 변동성으로 각각 산출하여 추이를 살펴보면 우리나라의 인플레이션율이 구조적으로 낮아진 2000년대 이후에도 인플레이션 관련 변동성이 등락을 거듭하는 모습으로 보이고 있다. 또한, 동 지표들을 활용하여 설비투자와의 관계를 점검한 결과 인플레이션 불확실성은 예상한 바와 같이 기업의 설비투자에 유의한 부(-)의 영향을 미치는 것으로 나타났다. 특히 이러한 인플레이션 불확실성의 비대칭적 효과를 살펴보기 위해 마코프 국면전환 회귀모형(Markov-Switching Regression Model)을 추정한 결과, 인플레이션 불확실성의 투자위축 효과가 경기위축기에 더욱 커지는 것으로 나타났다. Inflation uncertainty is known to have deleterious effects on facilities investment by disturbing the corporate decision on the opportunity cost of investment. In this paper, we test the validity of this hypothesis in Korea by estimating the inflation uncertainty with both a time-varing parameter model with GARCH disturbances and the relative price volatility and then, estimate the facilities investment equation which includes those uncertainty indicators. The uncertainty indexes estimated by the above-mentioned methods continue to fluctuate even after the inflation rate has dropped dramatically reflecting the structural changes of Korea's economy since the financial crisis in 1997. As a result of estimation of the investment equation by both OLS and GMM, we find the inflation uncertainty has a negative effect on facilities investment with a statistical significance. Moreover, by means of Markov-switching regression model utilized to verify the non-linearity of this relationship, we draw a conclusion that this negative effect of inflation uncertainty heightens asymmetrically during the downturn periods of business cycle.
판재성형공정에서의 소재 강도에 따른 스프링백 산포의 통계분석
손민규,김세호 한국융합학회 2022 한국융합학회논문지 Vol.13 No.4
본 논문에서는 소재의 강도에 따라 U 채널형상 제품의 판재성형공정에서 발생하는 스프링백 현상의 산포 경향의 분석을 수행하였다. 성형공정의 유한요소해석 및 신뢰성 기반 최적화 기법을 적용하여 인장강도, 항복강도, 소재 두께 등 재질 산포와 마찰계수와 패딩력 등의 공정 산포를 고려하여 산포해석을 실시하였다. 산포해석 결과 산포에 유의한 영향을 미치는 인자는 항복강도와 인장강도 순으로 나타났으며, 소재의 인장강도가 클수록 스프링백 양은 증가하는 반면 스프링백의 산포량이 감소하는 것을 확인하였다. 주요 변형이 발생하는 펀치 어깨부와 다이 어깨부의 변형률과 응력 산포 분석을 통하여 스프링백 산포량 감소의 원인을 분석하였다. 본 논문에 제안된 산포분석 기법을 활용할 경우 불가피하게 발생하는 성형공정의 산포를 예측하고 대응이 가능할 것으로 기대된다. In this paper, the stochastic distribution of the springback amount is investigated for the stamping process of a U-channel shaped-product with ultra-high strength steel. Using the reliability-based design optimization technique (RBDO), stochastic distribution of process parameters is considered in the analysis including material properties and process variation. Quantification of the springback scatters is carried out with the statistical analysis method according to the material strength. It is found that the scattering amount of springback decreases while the amount of springback increases as the tensile strength of the blank material increases, which is investigated by analyzing the strain and stress distribution of the punch and die shoulder. It is noted that the proposed scheme is capable of predicting and responding to the unavoidable scattering of springback in the sheet metal forming process.