http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
환경규제(RoHS, REACH) 대응 위한 국제표준 및 CRM 개발 협력 사례 소개
정재학,류건영,김주양 한국분석과학회 2021 학술대회논문집 Vol.2021 No.11
전기전자/자동차/공산품 등의 수출입시 유해물질 함유 여부 시험성적서에 대한 요구가 강화되었고, 관련 산업에서는 공급망 내 부품 및 완제품에 대한 친환경 제품 인증을 위한 유해물질 시험성적서가 필수적으로 요구된다. 최근 기업의 경우 ESG(환경 · 사회 · 지배구조) 경영활동 강화를 위해 플라스틱 폐기물 저감 및 재활용율 향상 등 Post-코로나 시대를 대응하기 위한 기업 움직임은 매우 활발하다. 이에 유해물질 시험방법 국제표준을 개발하는 IEC/TC 111(전기전자제품에서의 환경)에서는 2004년 WG 3을 설립한 후 각종 국제환경규제 (RoHS/ELV/REACH) 대응을 위한 시험방법인 IEC 62321-series 표준을 활발히 개발하고 있는 상황이다. 이들 IEC 62321-series 표준은 IEC에서 대표적인 horizontal 표준으로서, 각 국가마다 자국의 언어로 부합화 표준개발을 통해 전기전자/자동차/공산품/친환경/재활용 등에서 유해물질 함유 여부에 대한 기준 시험규격으로 채택하였다. 현재 한국 또한 KS C IEC 62321-1 ~ -10 표준 부합화를 완료하였으며, 추가로 발간되는 IEC 표준에 대해서도 지속적인 KS 부합화가 진행중이다. 현재 한국은 유해물질 시험방법 표준화 그룹인 WG(working group) 3와 JWG(Joint WG) 14(ISO/TC61(플라스틱)/SC 5와 IEC/TC 111) 에서 공동 작업반장(Convenor)직을 수임하고 있다. 이들 그룹에서 발간 및 개발 중인 표준들은 현재 총 18개이며, 그 중에서 한국이 제안하여 표준개발을 주도한 표준안은 총 9개로, 이 중에서 Halogen, Phthalate, PAHs, HBCDD 물질들은 국제표준으로 발간되었으며, TCEP, BPA, SCCP/MCCP는 현재 한국에 의해 표준 개발(정량 및 스크리닝법)이 진행중이다. 이들 표준개발 과정 중 가장 중요하여 많은 시간이 소요되는 단계는 개발된 시험방법에 대한 IIS(International Inter-laboratory Study)라는 국제실험실간 비교검증이다. 이 결과를 토대로 시험방법에 대해서 표준내 본장(Normative)과 부록(Annex)의 위치가 결정된다. 그러므로 표준개발 시 Method validation 및 IIS를 위해서 정확한 결과값이 존재하는 CRM(RM)이 필요하며, IIS에 사용된 CRM(RM)의 정보는 발간되는 표준 내에 기술되므로 전세계에서 이 시험표준을 사용하는 시험분석자는 우선적으로 기술된 CRM을 활용하게 된다. 특히 한국은 KRISS의 협조로 표준개발에 큰 도움을 받기도 하였으며 현재도 활발하게 협력 중이다. 이는 유해물질/화학분석 분야 국제표준개발 리더십과 동시에 Made in Korea CRM에 대한 대외 국가 브랜드 인지도 향상에도 크게 기여할 것으로 판단된다.
체육수업중 교사의 상호작용 행동이 수업평가에 미치는 영향
최경범,최영인,염건영,류기성 한국스포츠리서치 2004 한국 스포츠 리서치 Vol.15 No.5
The purpose of this study was to re-examine the effectiveness of teacher interaction behaviors on student learning products using two different kinds of experimental teaching units(E,T.U.). In one E.T.U., two teachers instructed respectively "vault activity units" to 5th grade classes of elementary schools with the same objectives, contents, methods and similar Environments. In such controlled conditions, we intervened with teacher A to perform active interaction behaviors(especially feedback behaviors to individual motor learning). On the other hand, teacher B was not intervened concerning interaction behaviors. In these practices, teacher A performed interaction behaviors 2 times more than teacher B. As a result, the average scores of student formative Evaluation to physical Education were significantly higher in teacher A's class than teacher B's class. In the other E.T.U., the same teacher instructed "volleyball activity units" to 2 different classes of the 9th grade in a junior high school, Instructional conditions with 2 classes were Equally controlled without teacher interaction behaviors. In the model C class, we intervened with the teacher to perform active interaction behaviors especially with individual student motor learning. In the model D class, the teacher was not intervened with performance of interaction in their motor learning, but to give advices about learning how to learn, in order to facilitate their spontaneous learning. As a result, the teacher in model C class performed interaction behaviors 3 times more than in the model D class. The average scores of student formative evaluation were also significantly higher in the model C class than the model D class. Thus, it seemed that the effectiveness of teacher interaction behaviors for student motor learning in physical education class suggested by previous research was confirm through these results of these E.T.U. studies.
안성진,김기중,유소미,류건영,지원석 한국막학회 2021 멤브레인 Vol.31 No.6
음이온 교환막은 수소를 생산할 수 있는 수전해와 수소 연료를 사용하여 전기 에너지를 사용할 수 있는 연료전지 시스템에 사용될 수 있다. 음이온 교환막은 알칼라인 조건에서 수산화 이온(OH-) 전도를 기반으로 작동한다. 하지만, 음이온 교환막은 상대적으로 낮은 이온 전도도와 알칼라인 안정성을 보이기 때문에 아직 수전해 및 연료전지에 상용화되는 데 한계가 존재한다. 이를 해결하기 위해서는 고분자 구조를 합리적으로 설계하여 새로운 음이온 교환막 소재를 개발하는 것이 필수적이다. 특히, 고분자의 물성, 이온전도도, 그리고 알칼라인 안정성이 우수하게 유지될 수 있도록 고분자 구조 및 합성 방법 등을 제어하여 한다. 음이온 교환막 중에서 Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) 기반의 소재는 상용화 되어 접근이 용이하다. 또한, 다른 고분자에 비해 상대적으로 기계적인 특성 및 화학적 안정성이 높아 음이온 교환막 개발에 자주 사용되고 있다. 본 총설에서는 음이온 교환막에서 사용되는 PPO 기반의 고분자 소재 개발 전략 및 특성에 대해서 소개하고자 한다. Anion exchange membranes have been used for water electrolysis, which can produce hydrogen, and fuel cells, which can generate electrical energy using hydrogen fuel. Anion exchange membranes operate based on hydroxide ion (OH-) conduction under alkaline conditions. However, since the anion exchange membrane shows relatively low ion conductivity and alkaline stability, there is still a limit to its commercialization in water electrolysis and fuel cells. To address these issues, it is important to develop novel anion exchange membrane materials by rationally designing a polymer structure. In particular, the polymer structure and synthetic method need to be controlled. By doing so, for polymers, the physical properties, ionic conductivity, and alkaline stability can be maintained. Among many anion exchange membranes, poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) is commercially available and easily accessible. In addition, the PPO has relatively high mechanical and chemical stability compared to other polymers. In this review, we introduce the recent development strategy and characteristics of PPO-based polymer materials used in anion exchange membranes.